Autonomous control for indoor
@rom_ni wrote: Hi! Hope you are all doing well. I would like to know what is the best and easiest solution to program a Navio2 drone for manual controls without GPS. Essentially I just want to have...
View ArticleMavros: Problems setting Navio2 Ardupilot to AUTO mode and setting home position
@kvnchowx wrote: Summary of issues I am having: Cannot set mode to AUTO in Ardupilot via Mavros Cannot set a home position in Ardupilot via Mavros Details: So I’m working with the Navio2 on a...
View ArticleTrouble Viewing HDMI Stream on Edge in QGroundControl
@cmelnyk wrote: Hello, I’ve been trying to get the live streaming working on the Edge. I’m using a Yi Action Camera (US Edition) and this micro to micro HDMI cable...
View ArticleVoltage sensing through Servo rail
@Barry_Bolton wrote: Is it possible to do voltage sensing through the Navio2 Servo rail Posts: 5 Participants: 2 Read full topic
View ArticleUsing RPI CLI to change flight modes
@Barry_Bolton wrote: Will it be possible to use the RPI CLI to change flight modes Posts: 4 Participants: 2 Read full topic
View ArticleHow to connect navio2 to my gimbal controller?
@vidan.cristian wrote: Hello, Can anyone help me to connect my 2-axis Basecam controller with navio2 autopilot. For the controller I have the BGC GUI v2.2 b2 and for the navio2 I have the lastest...
View ArticleAbout HDMI-CSI BRIDGE
@tloveu4949 wrote: Hi, I like to use HDMI-CSI Bridge to use GoPro Camera. but, when i command ‘raspivid -t 0’, said ‘The driver for the TC358743 HDMI to CSI2 chip you are using is not Supported’ how...
View ArticlePoor Reach Connection In-flight
@spiwakd wrote: Hello all, I am trying to integrate Reach systems into my drone flights to geotag photos more accurately for later use in Agisoft Photoscan I am also very new to these systems so my...
View ArticleReach RS+ Wifi issue
@davidmclaren9287 wrote: My university (UTAS) uses eduroam with WPA2 Enterprise security requiring a username and password, details here: https://www.eduroam.edu.au/. The RS+ does not seem to have an...
View ArticleRover measures Base position
@MartinPeer wrote: Hallo everyone First of all thanks to the emlid team to provide a system with this capabilities for a price range accessible to a lot of people (including me ). I am a total...
View ArticleRTKPOST-QT (linux): Max Pos Var for AR / AR Filter not available
@Johannes_Eberenz wrote: unlike in the Windows version, in the settings of the linux RTKPOST-QT Emlid b28 (provdiede here) , Max Pos Var for AR / AR Filter not available is not available on the...
View ArticleReach M+ and RS+ --> how they comunicate?
@carbon.extreme wrote: Hi all, this is my first message. I’ new to Emlid products. I’ve bought the new Reach M+ and want to add RTK with base station, buying a RS+. I looked into docs to understand...
View ArticleROSBridge Server with Unity 3D ROS#
@rom_ni wrote: Hi! Hope you are all doing well! Anyone tried to connect their Navio to Unity 3D via ROSBridge? Essentially I want to control my quadcopter with Unity by passing xyzr values. I am using...
View ArticleReach RS+ native compiler
@kishorenagaraj wrote: We are trying to compile [IMU data from Reach Kit](extract imu data) from Reach RS+. But itseems like Reach RS+ does not have g++ or gcc, how do we go about installing the same?...
View ArticleWiFi will not stay connected
@gdasher wrote: I have two new Reach RS+ units. Initial setup went well. Latest firmware and Reachview software installed. I did notice some intermittent WiFi connectivity issues, but we were having...
View ArticleResults of Static PPK
@DRoscovich wrote: I have been playing around with my RS+ a bit doing some PPK while I wait for the M+. I did an overnight log of approximately 8 hours to find out what I might expect in terms of...
View ArticleHas anyone succeeded in processing the data from REACH/Reach RS to Trimble...
@Yasser_Arafat_Tuanad wrote: *Has anyone succeeded in processing the data from REACH/Reach RS to Trimble Total Control or Trimble Geomatic Office or Trimble Business Control? Posts: 1 Participants: 1...
View ArticleNo throttle with navio2 in channel 3
@vidan.cristian wrote: I tried the following on my fixed wing UAV: I connected the throttle ESC straight to the receiver and it works but doesn’t if connected to my Navio2 flight controller....
View ArticleTotal newb here
@chantry.holdman wrote: You guys are pretty advanced users and i’m in need of help. I’m wondering do i need two of these if i just want to do gcp for drone mapping or can i get by with just one for...
View ArticleAttaching reach m+ to P4P (1st prototype...)
@Steven_Wallace wrote: My goal is to collect raw GPS logs with the reach M+, and use them to attach accurate location information to photos. I plan to operate in the stop-n-shoot mode offered on GS...
View Article