Navio 2 driver for raspbian?
@chenjiyang1991 wrote: I’m using Raspberry Pi 3 and Navio 2 for a real time drone project where the latency is a major concern. I wanted to use Fully Preemptible Kernel on Emlid image, but there does...
View ArticleHow do we actually use ROS to run our drone?
@zackous672252 wrote: How do we actually use ROS to run our drone? I understand that the emlid image has ROS installed but to what extent, and what are the limits of it. I am absolutely unfamiliar...
View ArticleClik here to view.
Reach does not charge through cable
@pet.GSS wrote: Hello, We have a Reach RS base and rover running v 2.11.0. We use the Reach cable that comes out of the bottom of the antenna for our data input stream, which works fine. But this port...
View ArticleReach RS+ Unexpected Shutdown
@teddy860 wrote: Just received two RS+ units. So far so great. Until we got to the job site and started setting up yesterday. I was collecting GCP coordinates for a drone survey. About 10 minutes into...
View ArticleBluetooth won't connect
@zach wrote: I’ve recieved my new Reach RS+ units, setting up a base station and rover for use in agricultural field. I’m connecting my rover to a Panasonic Toughbook CF31 and/or CF19 (which ever one...
View ArticleUse navio2 by sensor
@tloveu49 wrote: hello, My situation is that : (Raspberry + Navio2 + 4g Lte Stick : MAVproxy) ----- udp using ddns ---- (laptop : mission planner) i try this on Raspberry pi by using MAVproxy : sudo...
View ArticleEdge Stability problem
@chewwie235 wrote: I’m using an Edge on a DYS D800 Octa-quad with a DX-8 remote and the platform goes hard over to the left via the remote and auto launch. It will not correct to the right even with...
View ArticleNew Reach RS + No green light
@aggiebulldog wrote: I have a week old Reach RS +.Updated software. Worked for 8 hrs. Now I get. Red and Blue with no Green. I can WiFi connect, Network connect and SSH connect. Tried several button...
View ArticleSend data through Wifi with the Reach RTK
@kevin.bertrand wrote: Hi everybody, I’m looking to send data through the wifi connection of the Reach RTK but I don’t know how do that. I have a program that collect data from the IMU and stock them...
View ArticlePost processing comparing 2 Base Stations
@mrammer wrote: Hi, I’m processing some test data and need a little help, please. We did a flight with the Reach Rover on the UAV with camera, and had two base stations setup (Leica Base and Reach...
View ArticleConnecting reach with PDL
@dicky wrote: I confused how to connect my reach to PDL from pasificrest. I want to connect base with PDL with my reach, what kind of radio receiver can I use? @igor.vereninov @Igor_Fedorov @bide...
View ArticleClik here to view.
Reach RS+ Units shutting down during survey
@lewisc wrote: I received my Reach RS+ units this week. I have purchased two units, one for a base and one for a rover. Today was the first day I was able to use them. I updated the units as shown in...
View ArticleClik here to view.
Reach with pixhawk gps error and glitch
@Kadir_ARSLANPINAR wrote: Hi everyone, We produce a new drone and want to RTK gps adding. Setup included pixhawk px4 (m8n gps) and Emlid Reach . We have couple problem ; Fly with ReachRS base...
View ArticleNeed functional Emlid Reach version of convbin b27 for windows
@stephen.j.fergus wrote: I"m working on automating post-processing in Windows of data collected on the Reach. Most specifically, I need CONVBIN and RNX2RTKP, and I need the Emlid version due to need...
View ArticleReachView app won't register wifi network
@thunderflurry wrote: Before creating a new thread please refer to Quickstart guides for Reach and Reach RS. In case you are creating a thread about an issue it is necessary to provide following...
View ArticleBest way to collect data for multiple static point
@wizprod wrote: Hi all, What is best way to collect data for post processing for a site where I have lay down 10 permanent points (within a 100x300 meter rectangle) for stockpile measurements. Given...
View ArticleWifi Rance
@danieljohnbarnett wrote: Is the wifi in the Reach RS+ and Reach M not really meant for sending correction data via RTK? I was going to setup an access point on a pole that both could talk to to send...
View ArticleServo driver
@torebekzhumabek wrote: Hello. I am using APM Planner2 on my Ubuntu for Navio2 autopilot. Emlid Navio2 works fine, it connects to APM Planner. Now I want to connect to servo drivers. Please, could you...
View ArticleSurvey Under Tree Canopies
@spiwakd wrote: Hello all, I am a beginner to the Reach systems, so my apologies if I am asking obvious questions… What are the best practices when surveying underneath tree canopies? My end goal is...
View ArticleNo green light. App can’t find my reach rs +
@droneaerialsurveying wrote: You are going to post in News category! Posts: 1 Participants: 1 Read full topic
View Article