Reach got a yellow light?
@329375966 wrote: i got a reach RTK,and when it is reboot ,the led status is yellow ,which is not mentioned in the guide docs,such as green or blue etc.the led blinks each 2-3sec.and i can not...
View ArticleGetting started with ROS/Running mavros node
@Matlabcopter wrote: Hallo everyone i followed the ROS starting guide : https://docs.emlid.com/navio2/common/dev/ros/ And all went relativly well until i got to “Running mavros node”. I tryed to enter...
View ArticleMapping Kit Advantages
@dpitman wrote: Since the Reach RTK unit cannot receive a distant signal from the Reach RS unit, what is the purpose/advantage of the “Mapping Kit” https://emlid.com/shop/reach-mapping-kit/ over just...
View ArticleHow to pull elevations from logs/rtkplot
@DaneGer21 wrote: First off, this is my first post, and im a fairly new user to Reach. Quick up to speed, I have two reach modules(base/rover setup),both are up to date on all...
View ArticleFlash new fiemware
@Francesco_sisani wrote: Before creating a new thread please refer to Quickstart guides for Reach and Reach RS. In case you are creating a thread about an issue please specify the appropriate...
View ArticleClik here to view.
Reach - Cannot change positioning output
@Sjors_Gommers wrote: Hi all, I want to change the positioning output in the browser, but when I flip the switch a loading sign appears for a second and that’s it. Here is a picture: g[ps.PNG1366x768...
View ArticleSBUS read failsafe state
@damian.aregger wrote: Dear Navio2 Forum I am wondering if its possible to read the state of the sbus failsafe bit with the Navio RCIO driver. From the python and c++ example code I could only learn...
View ArticleClik here to view.
ReachRS/iPad link worked for about three weeks but not today
@datafromdrones wrote: A bit of a setback today. For the last three weeks or so, my iPad mini connected effortlessly with two Reach RS units. Today, the iPad connects only to one. In the settings...
View ArticleMotor run on start after changing from Copter to Plane
@Barry_Bolton wrote: Good day. I changed my setup from Copter to Plane 3.8. Disabled copter and now when ever I start my Navio 2 the motors will start and run at full speed the moment the Navio 2...
View ArticleEZ WifiBroadcast
@micahmosier65 wrote: Are there any future or current plans to implement EZ WifiBroadcast in the Navio 2 image? It has a lot more features and is still being updated unlike the original wifibroadcast....
View ArticleReach RTK units
@dpitman wrote: I’m getting ready to order the RTK kit in the US. Are all of the units the same version or have there been hardware revisions I should look for? Thank you. Posts: 3 Participants: 2...
View ArticleAlt Hold and Loiter don't takeoff
@dedezago wrote: Hello, I have had no problems flying my drone on Stabilize mode. Today, however, I tried Alt Hold and Loiter on two situations: Started flying on Stabilize and switched to Alt Hold or...
View ArticleBiased Roll
@dedezago wrote: Hello, When flying my drone on stabilize mode I have noticed it mostly tends to roll right a little bit, which requires my constant input on the roll stick. I do realize that’s normal...
View ArticleNavio RPi wifi access point
@CaptCrash wrote: Hello! I just got my Navio2 + RPi2 up, running and configured, all up testing was successful and the steps towards first flight are progressing smoothly. I don’t own a dedicated GCS...
View ArticleUAVCO Real-time GPS Data
@David_Leslie wrote: Wondering if anyone can help. UAVCO maintains a publicly broadcast streaming GNSS/GPS data from some of the PBO, COCONet, and TLALOCNet stations in the USA. They Realtime 1-Hz...
View ArticleConnect two reach to a NAvio2
@cartoocm wrote: Hello everyone. Is it possible to connect two reach to a navio2, deactivating the Neo-M8n integrated in the board? Thanks Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Throttle mid too low
@dedezago wrote: Hello, After flying my copter on stabilize mode, I got the following data log: image.png1229x217 5.28 KB We can see my hover throttle is around 0.2, or 20%. The ardupilot page...
View ArticleLogging Drone Information
@ProjectVenom wrote: Our Setup: Navio2 Raspberry Pi 3 Goal: We would like to create a logging script on the Raspberry Pi that would allow us to store IMU information (accelerate, gyro, and...
View ArticleHAT not detected - EEPROM possibly corrupt?
@CFSworks wrote: Hello all! Recently while trying to troubleshoot the IMUs on my Navio2, I found emlidtool was not detecting the HAT anymore. pi@navio:~ $ sudo emlidtool emlidtool version: 1.0.0...
View ArticleLogging satellite visibility and C/N0
@ndepal wrote: Hi all We just purchased a set of Emlid Reach RTK GPS devices and would like to evaluate and compare their performance. We are using one device as the base, determining its position...
View Article