Reach rs problem
@aziz_kountche wrote: hi , got problem with my reach during update both receiver are connect to network wiffi , but even with ip adress i can not connect to the app. also led indication for both...
View ArticleClik here to view.
Connecting Reach to Mission Planner via USB
@Ron_Gilad wrote: Is is possible to connect the reach module as base station to the mission planner via USB? image.jpg2424x450 145 KB Posts: 1 Participants: 1 Read full topic
View ArticleBeing asked navio login and password on first launch
@Chao_Li wrote: Hi all, I am a beginner for Navio2. I downloaded the Stretch image and wrote on the sd card. But when I fire it up, I was being asked to input navio login and password detail. Do you...
View ArticleLatest emlidtool fails
@Luis_Vale_Goncalves wrote: While installing a new sd card for NavIO2+RPI3 pn Strecth (latest Emlid image) got a strange issue while sudo apt-get upgrade Already did all the normal set-up (expand...
View ArticleClik here to view.
Navio2 working on raspberry pi compute module 3
@Nik_Tesla wrote: I’ve seen it mentioned a few times around the internet and I have a need for it, so I did a quick prototype this evening just getting all the Navio2 examples up and running with my...
View ArticleNavio2 / SBUS configuration
@alexandre.scherer wrote: I have got a Navio2 in Sept 2017 and mounted it on a Raspberry PI 2. I have a hard time establishing a SBUS connection between my receiver (FrSky X4R) and the Navio2 card....
View ArticleReach RS not charging
@esa.attia wrote: Hi, My reach rs does not show any LED indicator showing that it is being charged. I used different micro usb cables … there is no led indicator when I plug in the micro usb cable ....
View ArticleStorm 32 gimbal controller setup
@Michael_Richter wrote: Dear forum members. After some research on the forum I almost solved my problem, but I still have some questions . How can I control my Storm 32 gimbal via the USB port of my...
View ArticleClik here to view.
How to debug Ntrip stream
@wittich wrote: Hi there, I’m just one a travel to Africa and want to use the local Ntrip caster for correction. For some reasons the closes stream doesn’t work for any correction of my Reach RS...
View ArticleClik here to view.
RINEX problem
@Eder_Silva wrote: I just have a problem with the RINEX file, when I try to submit to IBGE for processing with a real position on datum SIRGAS2000, the app send the next message: image.png1366x768...
View ArticleUse Reach with 3m USB cable
@ago wrote: We are using Reach successfully via USB cable (getting IMU and GPS data using USB). This all works very well. Now our setup has changed a bit and the distance between the Reach and the...
View ArticleMatlab Controlled Navio2 Drone - How to bring both together?
@Matlabcopter wrote: Hallo everyone, Here is what i want to achieve: I want to Controll my Drone from Matlab drictly idealy over 3DR telemetry. The idea is i send a command like “forward” and the...
View ArticleClik here to view.
Trouble Connecting Mission Planner to Navio 2 (NEED URGENT HELP)
@mvp5356 wrote: A little background on my project: I am a senior electrical engineering student and for my senior design project I am working with a team to create an autonomous(or at least...
View ArticleReach RS / Reach + RFD900+
@David_Leslie wrote: Before creating a new thread please refer to Quickstart guides for Reach and Reach RS. In case you are creating a thread about an issue it is necessary to provide following...
View ArticleQuestion for compiler
@ece_student wrote: Hi, all I have a question about a compiler. I saw ‘building from sources’. According to this, cross-compiler for raspbian is recommended. So… is there some issue with usual...
View ArticleCamera Events
@Ron_Gilad wrote: How can I extract the Camera events from the reach in real time? Is it possible to analyze the .ubx files without specific software? Posts: 1 Participants: 1 Read full topic
View ArticleNavio perf measurement
@ece_student wrote: Hi, I previously used ArduCoper on pixhawk. I plan to test ArduCoper with Navio2. In this situation, I am wondering whether there is a utility, perf. This utility shows information...
View ArticlePPK Assistance?
@Lauren_O wrote: Hi All, @TB_RTK has generously worked with me through improving my PPK results in the past. Unfortunately, I’m still struggling to find ways to consistently and meaningfully improve...
View Article3DR claim of
@Wildtypitch wrote: Trying to enhance my photogrammetry accuracy with Reach being at the top of the list to get me there. Also keeping a keen eye on turnkey solutions provided by the likes of 3DR with...
View ArticlePPK Using Station Logs?
@dpitman wrote: If using log files (RINEX format) from a nearby GPS reference network station in the post process, a base and rover (drone based in this case) would still be required, correct? The...
View Article