Pixy CMUCAM5 camera
@thepheast wrote: Hello, I am brand new. I have a Pixy cmucam 5 and would like to connect it to the Raspberry Pi via Navio2 to influence the pwm to the esc’s. Is it possible to connect to Navio2 with...
View ArticleQuestion for additional wired-telementry
@ece_student wrote: Hi, I would like to connect Raspberry PI to computer via USB to set parameters. Maybe I will connect it to one of four Raspberry PI USB port. In this case, could I apply the...
View ArticleHow to use Tower
@dedezago wrote: Hi! Is there a tutorial on how to use Tower? I specificlly want to be able to perform 2 actions: Arm motors, takeoff 6 feet, loiter for 10 seconds, land Arm motors, takeoff 10 feed,...
View ArticleQuestion for motor check
@ece_student wrote: Hi I would like to check my motor connection. So… on the side of RaspberryPI, is there any way to spin one specific motor? For example, I want to check motor 1. Then, is there a...
View ArticleJust blink yellow
@dicky wrote: My reach just blinking yellow. Help me please, what happened? Posts: 1 Participants: 1 Read full topic
View ArticleReach RS external power on/power off
@Ivan_Prado wrote: Hi, We are thinking on integrating Reach RS on tractors. First concern on that is power. That could be solved by plugging the unit to a USB car charger, so not that problematic. But...
View ArticleQuestion about how WIFI discovery behaves when connection is lost
@Ivan_Prado wrote: Hi, I’m interested in knowing better how Wifi discovery behaves. But better I’ll start by explaining how my setup will be. I’ll have a tablet sharing Internet connection through WIF...
View ArticleNTRIP Caster cant be reached,, (adress error)
@Kim_Mortensen wrote: Have this message , and is in red ? Whar ist the prpblem ? Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
First Time Wifi Setup and Update
@Brent_W wrote: I just got a new Reach RS and decided to document and make a tutorial of my initial power-on through connecting to wi-fi network and updating. I set it up in my office with a window a...
View ArticleClik here to view.
Timeout waitng for autoscan/No mavlink device connected
@cameron wrote: Hello everybody, I’m a complete noob, I have a NAVIO2 and whenever I try to connect via USB to Mission Planner, it says “timeout waiting for autoscan/no mavlink device connected”....
View ArticleArm Throttle parameter
@dedezago wrote: Hey, guys! I just installed the most recent version of navio’s raspbian image, I was setting up parameters and I can’t seem to find the MOT_SPIN_MIN and MOT_SPIN_ARM parameters...
View ArticleClik here to view.
Emlid at the OPTIMISE workshop in France
@dmitriyershov wrote: Originally published at: https://emlid.com/emlid-optimise-workshop-france/ In the end of November 2017 Emlid took a part in OPTIMISE workshop in Toulouse, France. OPTIMISE...
View ArticleNavio2 won't connect
@dedezago wrote: Hi, I have a navio2-based quad. This morning I had no problems flying, but tonight my drone wouldn’t even turn on properly. I would connect the battery and it would only display a...
View ArticleUsing "Survey"; issues
@DaneGer21 wrote: I have gone out multiple times with my Reach. Today was no different except I took only my rover and forwarded CORs corrections over my phones hotspot. All fine and dandy so far....
View ArticleClik here to view.
Corrupt or "zero" Log file size
@cczeets wrote: Hey @igorvereninov, long time no post. Because we’ve been busy using our REACH’s! First off, the REACH is AMAZING! You guys keep taking it to the next level, which is awesome! We are...
View ArticleClik here to view.
[urgent] wpa_supplicant.conf file error
@dedezago wrote: Hi! My wpa_supplicant file keeps blanking itself. I even tried re-writing it from scratch and saving it. image.png1366x768 154 KB Why is this happening??? I cant fly without it...
View ArticleClik here to view.
NAVIO2 RPi 3 Reboots when moving control surfaces
@JDAS wrote: Hi everyone, I am using the NAVIO2 on the Raspberry Pi 3 Model B. I am using the Raspbian Stretch image from EMLID and ArduPlane 3.8 Issue Description The NAVIO2 and Raspberry Pi reboot...
View ArticleClik here to view.
Barometer readings keep increasing
@dedezago wrote: Hi, everyone! I currently have no problem flying the aircraft on stabilize mode. However, when using a flight mode that requires height control (ie Alt Hold or Loiter) I notice my...
View ArticleClik here to view.
Reading ADS1115 ADC using I2C port
@sjohns064 wrote: Hi, I need more ADC channels than the Navio2 already has, so I’m trying to use an external ADS1115 ADC on breakout board connected over I2C. ADS11151.jpg1000x750 90.2 KB...
View ArticleRINEX logging rate feature request
@Isaac wrote: Dear Emlid, I have finally received my Reach, from my point of view a very well rounded product! I would like to request a feature regarding ReachView logging, currently I’m using...
View Article