Height value
@danman wrote: Hi, I am a newbie, but after one week of reading i got very good and stable values with reachview beta. I bought your starting set. I always get a fix for the rover and it works really...
View ArticleClik here to view.
Navio2 Altitude Oscillation
@Anis_Koubaa wrote: Hello I was having very stable flights in GUIDE mode, until I noticed lately that after sometime of successful takeoff at desired altitude, the drone start to oscillate in altitude...
View ArticleHelp a newb out. Pixhawk or Navio2?
@robinasu wrote: Hi all, some questions: How is PixHawk 2.1 support? I'm debating which fork to take: 1) Pixhawk 2.1 with an application board, like a pi 2) Navio2 with a pi How is the dev experience...
View ArticleClik here to view.
No fix in real time, fix in postprocessing
@storm21110 wrote: Hi guys. I dont know, what i`m doing wrong. I have baseline about 1,5 meters, absolutely clear sky, big parking, base and rover at the cars roof, WiFi Access point, notebook and...
View ArticleClik here to view.
Random Geoid test. skHref geoid model vs PPFP from a known point
@TB_RTK wrote: This is just a quick comparison test to see the deviation in measure for lat, long and height and a first step to somewhat verify a new known point. Had no plan with it so things just...
View ArticleClik here to view.
Reach.. measure 60 parcels of land tenure
@dicky wrote: Hi, I would like to share my project today. Start from 11.30 am, my measurements was started. I used wifi for transmitted correction. Wifi can reach 5km (factory claim). I put the wifi...
View ArticleBest Settings on UAV as Rover
@HELImetrex wrote: Hello everyone,Just wondering what everyone is using for best settings with the reach on a UAV. Are you using 5hz or 10 hz Glonass sats? Glonass AR on of off?5 Hz or 10 Hz Max...
View ArticleClik here to view.
Couldn't update
@dicky wrote: Hi @ivereninov, my reach as rover couldn't update to latest version. I don't know the problem. This is use rndis. no update.png638x610 21 KB Then I connect reach to wifi, no action such...
View ArticleArducopter 3.5rc1
@mlebret wrote: Hello, Did you have a try with Arducopter 3.5rc1 for Navio2 (from http://firmware.eu.ardupilot.org/Copter/beta/navio2/ I did a new setup based on 3.4.4 latest ROS image and arducopter...
View ArticleNavio2 Pros & Cons
@robinasu wrote: Hi all, what do you consider to be the advantages of running the flight controller on Linux compared to something like Pixhawk 2? I'm thinking it's CPU performance and perhaps ease of...
View ArticleClik here to view.
Xbee on OTG usb
@Guillaume_Rosa wrote: Hey fellaws ! I bought a reach kit for my job in order to make an autonomous boat. I know ,I already read the other topic about that, but here is my problem. On the rover Reach,...
View ArticleGPS antenna mounting on tractor
@87YJ wrote: Hi all I'm working on getting the reach set up for lightbar type of guidance on my tractors this spring. I'd like to be able to move it between different tractors easily. With the stick...
View ArticleIs there a way to run Arducopter software on RPi without a Navio board?
@ArkadiuszN wrote: Hey, is there a way to run Navio's image software without Navio board?I want to learn and test some ROS code before ordering hardware but on stable image I get "No INS backends...
View ArticleQuestion about Base Mode on ReachView 2
@bea wrote: Hello, my apologies if this is a silly question. If I have a unit that's meant to be a base station, does it need to remain in the Base Mode screen of ReachView 2 the whole time? I...
View ArticleNavio 2 freeze when I move it!
@vidan.cristian wrote: Hello everyone,I am very disappointed because I can t figure out how to manage this problem. The Navio 2 autopilot is a shield for my Raspberry Pi 3 Model B, I made all...
View ArticleClik here to view.
Update problem
@Franz_Helmli wrote: Dear sirs, I stopped using reach for some months. I am now back and want to update to the new version.I have upgraded the reach image to 2.1. After that the reach module shows up...
View ArticleWIFI Connection issue
@Andreas_Ortner wrote: I have created 4 wifi connections: a) Home officeb)Officec)iphoned)mobile wlan router with simcard Reach always connects to the first (homeoffice) in the settings. if the first...
View ArticleDo I need an RC input to make the drone fly?
@asura wrote: Hey guys, sorry for my stupidity in here, Im pretty new to this ardupilot and drone world, Im trying to make a simple vtol drone for some indoor hovering, and I would like to ask some...
View ArticleCombine depth data to Reach(View)
@e.atkin wrote: Hi there,Wondering if anyone has thought about and/or looked at how depth soundings from an echo sounder, transmitted over Bluetooth as NMEA (or other), can be logged simultaneously...
View ArticleReachView 2.2.x USB radio
@Simon_Allen wrote: does ReachView 2.2.x allow the use of USB radios?I have my power coming through the connector and the radios through the USB. I really want to swap to RV2.2.x as I really want to...
View Article