How to improve the range of the FPV
@asura wrote: Hey! So I already have gstreamer working on windows with the navio2 and the pi camera, but this is only on my lab on a short distance. My question is, how do you guys usually do to get...
View ArticleExternal GPS (Marvelmind)
@Vava wrote: Hello! We're trying to get our indoor navigation system to work (Marvelmind) that uses an external GPS to spoof the signal and in the manual it says to use -B /dev/ttyAMA0 for UART or...
View ArticleCongratulations
@Simon_Allen wrote: Wow,I received my Reach modules on Monday.Struggled with the installed ReachView but got a working system by Thursday.Installed the 2.2.1 this morning and have an awesome, even...
View ArticleAndroid App
@surveyor wrote: Hey Everyone, I've been playing around with an Android App for basic Survey Functionality - ie: WGS84 -> UTM, Point Storage and Point Stake-out. I've named it the same as the other...
View ArticleHow do I install px4?
@asura wrote: Hi...Im totally lost on this. How do I install px4 on the navio2 board?? I honestly have no idea. In the px4 website it says that you should be able to flash it with the groundcontrol,...
View Article14Hz post processing problem
@tobias-dahms wrote: I have tried to use GPS-only logging 14Hz with the latest update (2.2.1). Unfortunately post processing isn't working. rtkpost_emlid_b26.exe either runs out of memory or, when I...
View ArticleCannot fash due usb recognition in windows 10
@andyeb wrote: Hi I've browsed through various topics on this forum and tried running flashall etc but icannot get coms due to a USB issue.Ive tried using the intel installer , installing the drivers...
View ArticleGet pisition of pitch, roll and yaw for python
@cristian-saul-66 wrote: hello I have the rasberry pi 3 and a navio+.i would like to know if there is some code that get pisition of pitch, roll and yaw for python thanks a lot for your help Posts: 1...
View ArticleAdditional correction - use
@Simon_Allen wrote: in RV2.2.1 there is the option to add an 'additional correction'. What is the purpose of this? I have set my reach up to use local corrections as base correction and a local...
View ArticleTimestamps 0.1sec
@dicky wrote: Hi guys. Any body have experience about camera. I'm looking for camera with timestamp 0.1sec and timelapse for aerial photo. Maybe there is one of you have this experience or same like...
View ArticleNavio 2 Hardware in the Loop
@Euan_Foster wrote: Hi All, I would like to test my hardware by using a hardware in the loop simulation with X-Plane. My intended platform is a plane running the Arduplane Firmware I have found a few...
View ArticleInclude extra motor on existing frame
@asura wrote: Hi guys, quick question. If I want to include an extra motor in a already existing frame (like a bimotor configuration for the arduplane) which parameter would I have to change to enable...
View ArticleHow can I get Reach heading output
@matt.carp wrote: I'm looking into integrating my Reach module into my rover control application. I plan to obtain position information from a tcp stream. Is there a way to obtain heading information...
View ArticleHow to access Reach GPIO46 GPIO77
@matt.carp wrote: I see that the Reach module provides access to two I/O pins, GPIO46 and GPIO77. Is it possible to interface with these pins? Ideally I would like to provide an analog voltage...
View ArticleFailed to use barometer
@andrewbarnes97 wrote: Hi, I'm trying to run with the command sudo ArduPlane FE udp:192.168.43.86:14550. It worked before but now it's coming up with the error message: AP_Baro_MS56XX: failed to use...
View ArticleReach v2.2.2 reboots every 15 minutes or so
@rrr6399 wrote: I've been experiencing many reboots of the Reach for v2.2.2 when connected to a Pixhawk and sometimes when connected to the laptop via USB. Multiple Reaches on different Pixhawks have...
View ArticleBypassing update process on Reach 2.1.3?
@rrr6399 wrote: I would like to revert back to using 2.1.3 to avoid a reboot problem I'm seeing, but it doesn't appear that I can get past the initial setup screen. Its forcing me to update the...
View ArticleError on c++ examples
@asura wrote: Hi..Im trying to compile the examples of c++ but whener I write "make" I get the following error: g++ -std=gnu++11 -I ../.. ../../Navio/gpio.cpp ../../Navio/RGBled.cpp...
View ArticleNavio2 and precision landing with camera
@following.soaring.dr wrote: Hi everyone, I am considering to use Navio2 to do my thesis on precision landing. I will have a script to do the image processor and feed a mavlink message to Arducopter...
View ArticleReach for tractor guidance
@WilM wrote: Wondered if anyone had experience to share of using the Reach RTK module for steering guidance of tractors or other agricultural machinery. How are you finding accuracy of the system?...
View Article