Reach standalone GPS?
@Chow wrote: Does anybody know if you can use 1 Reach GPS with Pixhawk acting as a standalone GPS? Posts: 2 Participants: 1 Read full topic
View ArticleReach serial output on windows 10
@julicious wrote: Hello,I'm trying hard for days to get things working. Setup on Base: Bec connected to lipo and telemetry by USB otg. Rover: serial radio on df13, surface windows 10 in USB other, I...
View ArticleHow much software can I install on my Pi3 while I wait for my Navio2?
@perlovfald wrote: Just purchased a Navio2. Waiting for it to arrive in the mail from Hong Kong. I am eager to get a head start on my project. How far should I proceed on the installation process with...
View ArticleReach update not working
@keepclicking wrote: I reflashed then when I update it goes all the way through and I wait untill the leds blink white,blue,blue,red.Then I restart the browser the version is still 0.3. I start all...
View ArticleReach view future request for next versions
@Andreas_Ortner wrote: Dear emlid team! Please can you use exact the same name and definition in reach view like in the .conf file or rtk documents... Like: pos2-arlockcnt & the a short...
View ArticleClik here to view.
Setup video
@Desh wrote: Hi guys, I've had my reach units for a while, but I've had trouble setting them up to get an rtk solution. Was wondering if you guys had considered putting up a video to show how the...
View ArticleBase coordinates
@Eric wrote: For the locations where I use Reach I had no way of obtaining a reference location to setup the base unit. The best I can do is derive something from google maps but that is not accurate...
View ArticleOnly one compass available on Navio2 and APM
@Andrey_Musinov wrote: Hi guys! First of all, I'd like to thank everyone who developed this great hardware - Navio2. The board works very well for me. The issue I'd like to resolve next is how to turn...
View ArticleAbout reach on Italian media
@Francesco_sisani wrote: Hy Emlid I think you can be happy for this...
View ArticleReach Power Source
@v.muscio wrote: hi, i would like to know, how connect the reach rtk to power with df13 ports.please send me the photo!!thanks Posts: 5 Participants: 2 Read full topic
View ArticleRC Input Spits Out 0
@rsj wrote: I am using a Hobby King HK-T4A V2: http://www.hobbyking.com/hobbyking/store/__8338__Hobby_King_2_4Ghz_4Ch_Tx_Rx_V2_Mode_2_.html I connect CH1 from the receiver to the RC Input. When I...
View ArticleNavio2 - RPI3 - (Arducopter - Tower)Sensor issues
@alpa wrote: Hi, I have been playing with the above setup since a couple of days, and altough for a very short time moving around the pi/navio2 sended the correct telemetry data to the android Tower...
View ArticleNAVIO2,Pi2 ,set-up ,installation and configuration
@a753951852 wrote: For all intents and purposes consider me a noob. I recently bought the navio2 , and was trying to set it up and calibrate it,but i think i have messed up few steps provided in docs...
View ArticleTelemetry not connecting on Navio2
@Jasonlabrosse79 wrote: I can't get my telemetry to connect this is the error i get pi@navio:~ $ sudo ArduCopter-quad -C /dev/ttyAMA0Raspberry Pi 2 with BCM2709! Init APM:Copter V3.4-rc1 (dfa90d29)...
View ArticleBoard is heating up and no LED flash
@tagorecaue wrote: I bought two used units. When I was testing, I found that one of them is warming up near the USB port and there is no LED lights.Does the electronic board is burned? Is it possible...
View ArticleProble with Mission planner's sik radio setting
@t_morio wrote: HiDid anybody run into the problem with "mission planner"'s sik radio setting? When I tried to do the setting by clicking the "load settings" button, a window popped up saying "Failed...
View ArticleSpidev0.2?
@mas4649 wrote: I installed APM and tried to run. But Pi spits error as below. SPI: unable to open SPI bus /dev/sipdev0.2: No such file or directory I checked that SPI is enabled and both sipdev0.0...
View ArticleReach case model E: too small
@alobo wrote: We've printed Reach case model E at the end ofhttps://docs.emlid.com/reach/mechanical-specs/ and the Reach unit does not fit in it. It seems that the case was designed for the unit...
View ArticleRelative Position between two drones
@mohmdalgarni wrote: Is it possible to use Reach to find relative position and heading between two drones?if it is possible, what is the best way to do it? Thanks Posts: 3 Participants: 2 Read full...
View ArticleClik here to view.
Really good tracklog with Reach and a RPA fixed wing
@Luke_Wijnberg wrote: We have been a bit busy recently to do testing with Reach, but we are busy doing a fairly large mapping project in Ethiopia (read about it here) and are having endless hassles...
View Article