Navio2 quad copter crashes at take-off
@navio2noob wrote: Hello, I am a noob in drones. I built a Tarot 650 with Pi2 and Navio2, did the ESC calibration (all at once) and the ArduPilot calibration using MissionPlanner. The problem I have...
View ArticleReach can't find 3DR radio connected via USB OTG
@sonyccd wrote: I have the 3dr radio connected via usb otg and it powers on but does not show up as an option in reachview. I am trying to have nema out view uart to a uart usb converter to be read by...
View ArticleMy new rover:
@schuermannsebastian wrote: Hi, I just wanted to share my newest contraption with you: 20160714_134022_HDRsmall.jpg2656x1494 1.99 MB 20160714_172411small.jpg4250x2391 2.3 MB It consists of a Turnigy...
View ArticleGimbal Stabilization doesn't work
@Orli1 wrote: Hi, I successfully assembled a Servo gimbal and configured it in Mission Planner. The stabilization worked fine, but after one week the following error occurred: After i Power up NAVIO,...
View ArticleRtklib post process
@jmcarthur wrote: I set up one reach module in single mode. Left it in that spot for 3 hours. Processed the file in rtkpost Looks like it worked lots of points showing. How do I determine the median...
View ArticleCannot stream video from RPI2/Navio2
@drone_newbie wrote: Hello, i after hours and hours of searching on the internet i am still not able to stream video from my webcam( that is attached to my Rpi2/Navio2) to my PC through VLC. I have...
View ArticleMPU9250: unexpected WHOAMI 0x0
@Jasonlabrosse79 wrote: Is it possible that I may be having this same problem with a Navio@. I can't anything to work I have tried reinstalling the firmware 3 times and I can't get APM to launch. I...
View ArticleC_uart_interface_example
@Al_B wrote: Will it be possible to run the c_uart_interface_example in the RPi3+Navio2 like it's done in the Pixhawk? Posts: 1 Participants: 1 Read full topic
View ArticleSimplified Chinese translation of NAVIO2's docs
@jiao.ye.public wrote: Hi All, I've translated the docs of NAVIO2 (Web: https://docs.emlid.com/navio2/, GitHub: https://github.com/emlid/navio2-docs) into Simplified Chinese when I was waiting for my...
View ArticleNavio2 gimbal RC_OUTPUT problem solved
@Andrey_Musinov wrote: Hi guys! Yesterday I've mounted and connected my 3-axis handmade gimbal based on Storm32 controller.In APM 3.4-dev (on Navio2) set mnt_type=1 (servo) and assigned RC6, RC7, RC8...
View ArticleFlying indoors without GPS
@Al_B wrote: Since the Navio has the GPS module embedded on the board, is there a way to ensure that the GPS module is not used indoors? For instance, an AP parameter that tells the ArduPilot to not...
View ArticleAlternative for rfd900 and 3dr radio
@Andreas_Ortner wrote: I wont use reach for agricultural use with a parallel driving app like sigro pilot. my first testing was with 3dr radio - but they are not strong enoughrfd900 radio are not...
View ArticleJust receive Navio2 and trying to get it working with Mission Planner
@hank wrote: I have my new Navio2 hooked up to my new Raspberry PI3 and have the wireless working, can connect with Putty to shell. I don't have any telemetry hardware installed yet, as I am just...
View ArticleBase doesn't record log
@youngzone wrote: Hi, I was testing the REACH today, both units ran a few minutes in float mode. However, there was no log files in the base unit, which is really weird. I wonder if there is anything...
View ArticleNeed advise powering servo rail with Opto ESCs
@atpa8a wrote: Hello forum! While I'm learning how to solder XT60 to 10 AWG wire, let me ask you a question... RPi3 and Navio2... I'm using the HK Pilot Power VI Module with Opto ESCs. So I need to...
View ArticleSupport needed - navio2
@alex-n wrote: Hi, I started a project with navio2 and now I am looking for someone in GERMANY (best would be in the region NRW) who can support me with my quadrocopter project. Thanks, Alex Posts: 1...
View ArticleHeading estimation with two receivers
@jonas.a.hofmann wrote: Hey there, we want to determine heading only. Is it possible to use the moving-baseline conceptby placing both the base station and the receiver on the rover (distance about 2...
View ArticleGet data from log files
@Arezki_Djelouadji wrote: Hello Emlid Team ! Is there a way to get the coordinates I see on rtkplot in an .txt file where I can see latitude longitude and height vs time ? I try to check on each log...
View ArticleCan get more then 3 sat over 45!
@sdujolo wrote: Hi, I have tried all kind of settings for the rover and I can't more then 3 sats green in "Status" I have it in good location wtih clear sky. It jumps 120m in rtkplot. Posts: 6...
View ArticleCan I use Raspberry Pi 3's built-in bluetooth with Navio 2?
@jiao.ye.public wrote: Hi, I am considering connecting my RPi3+Navio2 via RPi3's built-in bluetooth. But I cannot find bluetooth device on RPi3+Navio2. For example, I used bluetoothctl console to list...
View Article