Support for Wheel encoder
@esa.attia wrote: Hi, Does the navio2 support wheel encoder input for Ardurover? IS this a limitation of the hardware ? http://ardupilot.org/rover/docs/common-wheel-encoder.html Posts: 1 Participants:...
View ArticleClik here to view.
RealTime Performances on Raspberry Pi 3
@bchoco wrote: Dear all, I’m looking for a versatile flight controller for my quadcopter. I’m considering Navio2 since it extends the Raspberry Pi 3 board that has lot of connectivity. However I got...
View ArticleStakeout update please
@carlo.dijssel wrote: Hi there, I would love to hear how the promised stakeout option is progressing. It would be a major improvement over going out in the field with a piece of paper and compare the...
View ArticleClik here to view.
Setting up base station - corrections messages
@esa.attia wrote: Hi, I’m currently running version 2.10.3 Dev. I have 2 Reach RS modules. Currently, I am only using 1 module and getting corrections from an NTRIP server and that has been working...
View ArticleNavio2, Rasperry Pi and Real Time performance (PREEMPT_RT and Xenomai)
@Ricardo_Borges wrote: Hi, I’m developing a custom application and have some questions regarding the Raspbian image provided by Emlid: Does Emlid image is compiled with the PREEMPT_RT flag set? If I...
View ArticleClik here to view.
Reach RS ROS driver
@jacob.seibert wrote: Hi all, in our company we use the Reach RS as a GNSS receiver on a mobile outdoor vehicle. We started off using the nmea_tcp_driver but soon added more features to it to improve...
View ArticleClik here to view.
Can 3g/4g usb dongle be connected to Reach module for internet
@Arun_Kumar_Surisetty wrote: This figure in the documentation shows that Reach can be connected to a USB dongle for internet (3G/4G). But in some of the discussions, it is not so! Please clarify...
View ArticleRTK French users
@GeoDup wrote: Hello everybody, I would hnow if someone used only one reach RS with a connection to Teria or Orphéon in France ? I want to know the protocol of use : what is the best connection ?...
View ArticleClik here to view.
[Navio2] Does anyone know about Inertial Navigation System?
@Andy_L wrote: Hi, I am working on my middle school science project. And we need INS for manipulated variables. However because INS is super expensive ($500). I am just trying to make a simple...
View Article[Simple] What is PWM output?
@Andy_L wrote: On Navio 2 marketing page, there is a GIF of PWM output. What is that, and what is that for? Posts: 2 Participants: 2 Read full topic
View ArticleReach and Pixhawk correction
@vantmex2015 wrote: Before creating a new thread please refer to Quickstart guides for Reach and Reach RS. In case you are creating a thread about an issue it is necessary to provide following...
View ArticleEmlid Edge Quickstart Video
@dmitriyershov wrote: Originally published at: https://emlid.com/emlid-edge-quickstart-video/ With the Edge drone controller launch, we’ve also rolled out extensive documentation for our new...
View ArticleClik here to view.
FrSky to Mavlink Converzer
@Axel_Weckschmied wrote: I’m using this solution for Pixhawk FC: GitHub Clooney82/MavLink_FrSkySPort This MavLink_FrSkySPort repository is discontinued! The development is moved to...
View ArticleNTRIP Timeout on iOS Hotspot - Reach RS
@Andy_Davies wrote: Hi all, I wonder if anyone else is suffering from a similar problem. I am fully credentialed with the euref-ip.net NTRIP caster, and I can connect my Reach RS to the caster with no...
View ArticleReach rover fixing on moving animal
@Jerome wrote: Hello, I would like to use a Reach rover on a moving animal. I was wondering how well it should be fastened and how critical the fixings are to enable an accurate correction using the...
View ArticleCannot upgrade emlidtool & arducoper to v3.5.5
@stavros wrote: Hi all, I’m flashing image ‘emlid-raspbian-20170922.img.xz’ onto my SD card, but when I try to: sudo apt-get update && sudo apt-get dist-upgrade I do not get the warning for...
View ArticleReach rs and reach
@max246 wrote: I am wondering what is the best system to connect the two device to get the rtk fix. I can’t use Bluetooth or WiFi but I think I can use some radio module? I check the documentation for...
View ArticleNo satallite data at all on Reach RS
@Arnault wrote: Dear all, I’ve just set up a new Reach RS unit as a rover (after having already installed one other Reach RS unit as a base, and two Reach units as rovers). All the units previously...
View ArticleNTRIP over 3g/4g
@Kansanparantaja wrote: Hi there I’ve been using 2 x Reach RS for marking GCP’s for mapping. I’ve been using 2 mobile phones as hot spots to send corrections via NTRIP. Everything has been working...
View ArticleConnect Mission Planner ; Select COMPORT
@Andrew_L wrote: Hi I have a question, just how to connect Mission Planner to Navio 2? I am kind of just connect my laptop and RPI 3 with USB A male to A male cable, but there is no any comport....
View Article