Multiple error messages
@pmk12 wrote: I am new to using navio 2 and mission planner. I have gotten everything setup up and have been using MP to configure my drone. Recently everything has been working great. I can see the...
View ArticleClik here to view.
Reach DF13 connector ripoff
@rinatka7 wrote: Hello to all.I have a problem with DF13 connector, while inserting(with normal pressure) cable to DF13 connector i broke this connector.Could someone help me with traceout this broken...
View ArticleNavio2 + APM for estimation only
@airpmb wrote: I have a Navio2 which I am planning to use to supply state estimates to custom control code. Thus far it looks like this should be feasible by hacking on the Ardupilot code, though as...
View ArticlePost Processing Help
@arturosantiagososa wrote: Hello All, I have the logs of the Reach and of the VRS base. Now, how can I process this data in order to be able to geotag images and then to pix4d? Thanks! Posts: 1...
View ArticleBackup mavlink
@Vootele wrote: Hello folks.We are flying our Go Discover with Navio+ via 4G now.Last flight was 28km and everything is working great.However, we are interested of having backup mavlink channel in...
View ArticleClik here to view.
Object avoidance with Navio 2
@staroselskiy wrote: Introducing Navio2 can I detect barriers with navio 2 or I should to use another board? If I can use navio, which sensors I it's easier if you stick to your thread; if you wanto...
View ArticleBeta v2 image with ROS support for Navio boards
@staroselskiy wrote: Hello guys, We'd like to let you know that we updated our beta image. Take a look at the old thread. All the changes do apply to the newest beta as well. The newest beta mostly is...
View ArticleNeed help
@dicky wrote: Hi masters,,I try to flash firmware to new version. When i have run the lash, then the app run, next few second, the application closed it self. I don't know why.. Posts: 3 Participants:...
View ArticleRadio
@dicky wrote: Hi, masters. Any body know others radio for reach besides rfd900 and 3dr telemetry? Posts: 1 Participants: 1 Read full topic
View ArticleProblems installing APMrover on new navio2
@vinorobo wrote: The installation instructions seem to be wrong. I am trying to install ardurover on a new navio2. I got the image flashed and I can login over ethernet. sudo apt-get update &&...
View ArticleCrash disarming & the motors are cutting off during max aileron
@haytham wrote: I'm using navio2 with raspberry pi 2 and I installed emlid-raspbian-20160718.img. When I'm moving the aileron or the elevator stick to the max position, I receive a crash disarming...
View ArticleReachView 2 beta v2.1.3(and new image)
@efedorov wrote: Hey guys! We are releasing yet another update to our ReachView 2 beta, v2.1.3. Changes This is a minor update that contains various fixes mentioned by you or found by us. RCH-329...
View ArticleRotating around the yaw axis
@kenneth.f wrote: Hi, I’m a student at NTNU in Ålesund and I’m working on my bachelor thesis. In my thesis, I’m using an octocopter, and I’m currently working on the theory part of the report. I...
View ArticleClik here to view.
Wifi telemetry modules suggestions
@Multirotorcraft wrote: Hi all I've been playing around with a couple of wifi telemetry modules. But they have all had built in antenna's but I found this one today which is serial TTLopinions or...
View ArticleWhere to plug in ESC's on the servo rail
@wawsha wrote: I have been hunting for a straight answer with no success lol...How do you know which channel to plug each ESC into on the servo rail? Do you set up motor 1,2,3, etc somewhere in the...
View ArticleNoisy barometer?
@toncho wrote: I made a test flight some time ago. Noticed a strange behavior of the altimeter - sporadically changing altitude and a bit of a noise in the data. Reviewed the log and I see a lot of...
View ArticleReach integration with Pixhawk Issues
@rrr6399 wrote: I had a couple of questions in regards to using the Reach as a secondary GPS on the Pixhawk: 1.) It appears that the logic in the Ardupilot firmware to switch GPSes is based solely on...
View ArticleClik here to view.
No Fix no matter what I do
@arturosantiagososa wrote: Hello all, IMG_5021.PNG1242x2208 98.2 KB I have been trying for weeks to get a fix with 3 different antennas. Today I think I have given up wth the Reach. I place the Reach...
View ArticleBoot raspi into desktop?
@zhanghaijason wrote: Hello,I tried to boot the raspi into desktop mode using sudo raspi-config, but it says there was an error running option 3 boot options. Has anyone is using desktop mode with...
View ArticleAny console or app for analyzing status of reach
@Hamed_Jafarzadeh wrote: Hi,I have been struggling with Reach to get fix but unfortunately I couldn't get it consistently . Most of the time I can see float but sometimes for couple of seconds It...
View Article