Parameters for home made gimbal
@Guiboy wrote: HelloI am currently designing an home made 2 axis gimbal holding a RPi Cam V2I have bought the following motors...
View ArticleTrouble when editing /boot/wpa_supplicant.conf
@JAR4x4 wrote: Hello! I have been running my Navio 2 with the old image for a while now. Now I have upgraded to the 20160718 image. When i edit the /boot/wpa_supplicant.conf image the RPi will not...
View ArticleIphone can't get connected to the reach wifi
@MasterYang wrote: Hello, I met a weird issue of the wifi connection--it was ok with laptop but not with an ios device, I wonder what could the possible reason for that? thanks, Posts: 1 Participants:...
View ArticleNAVIO2 UART Pinout (six pin connector)
@finniest wrote: I am trying to connect the bluetooth dongle from my Pixhawk to the NAVIO2. The previously used Pixhawk connector won't quite latch to the board, so I am switching to the NAVIO2...
View ArticleAdding Reach IMU data to time events
@jwalsh wrote: From what I understand, adding IMU data extraction support to the Reachview App has been planned but not implemented yet. If this feature will not be added for a while yet, is there any...
View ArticleTime Stamp Precision Question
@jwalsh wrote: So far, I'm getting outstanding results post process correcting the Reach, but I have a question regarding the precision of the time marks. I currently have the Reach rover configured...
View ArticleNavio2 Schematics
@NatSki wrote: Are the Navio2 schematics available. I am working on my own code and the schematics would be helpful, especially for the I2C PWM pinout and pins Navio2 uses from the RPI3. Posts: 2...
View ArticleClik here to view.
Couldn't get fix with cors
@dicky wrote: I'm still observing reach with cors base station. But still not get fix. I use gps glonass 5Hz, connection is good. Screenshot_2016-09-15-13-55-52.jpeg720x1280 164 KB Posts: 17...
View ArticleIs there anybody getting meaningful fixes with REACH in post processing?
@thomas1 wrote: We have been using RTK equipment for different applications and I think we kind of know what we are doing. However, when it comes to REACH things are really weird. I am not talking...
View ArticleI2c sonar & i2c bus speed - how to
@tobias-dahms wrote: Hi, I want to connect a Maxbotic sonar to my Navio2. As I understand I need to lower the bus speed to 400 khz which is possible/feasible with Navio2.I tried to add a file with the...
View ArticleClik here to view.
RTKLIB issue
@Pascal_P wrote: Strange behaviour here with the RTKLIB I get from Emlid doc (2.4.3 b16).When Reach is on, I have correct RTKplot real time positions through TCP.If I get Rinex log and try to plot the...
View ArticleReach RTK USB OTG
@Jla wrote: That issue: https://community.emlid.com/t/reach-cant-find-3dr-radio-connected-via-usb-otg/seems to be still existent in current reach kernel. The device still not recognizes FTTI usb...
View ArticleBase CORS coordinate?
@dicky wrote: Hi, anybody know how to know the coordinate of CORS except asking to the admin of CORS? Posts: 4 Participants: 2 Read full topic
View ArticleReach в геодезии
@san43 wrote: Можно ли использовать рич в геодезии? какую точность я получу? Возможно ли использовать рич с программами для gps приемников (например SurvCE)? Возможно ли подключение к существующим...
View ArticleClik here to view.
Accelero calibration stuck, using mission planner
@I_Made_Devantara wrote: Hi fellas. I am trying to calibrate the compass on my Navio2 with Raspi3b because my accelero keeps on displaying "error post vert variance" which shows bad and laggish...
View ArticleClik here to view.
Direct result and post processing result
@dicky wrote: I tried connected reach to cors this afternoon, and the results for approximately 20 minutes fix, float of less than one minute, without a single. then I just do post processing, but the...
View ArticleClik here to view.
Reach Base through Lefebure NTRIP Caster
@Richard_H wrote: I am trying to configure a reach unit as a base sending corrections to a second rover unit via NTRIP. I am using Lefebure NTRIP Caster to enable this on a PC that will be remote to...
View ArticleApm.deb not found in files.emlid.com
@ministrillo wrote: Hi. https://files.emlid.com/apm/apm.deb, needed to install APM , do not you have available on your page. Posts: 1 Participants: 1 Read full topic
View ArticleWill led colors tell if reach has fix or not?
@TB_RTK wrote: ref, this doc about led https://docs.emlid.com/reach/reachview-status/ It says > Fix with green blinks But i can`t see that this is correct. I get one white, 2 blue and one green...
View ArticleSubscrib ntrip igs
@dicky wrote: Hi, I want to get a correction from igs.org but I do not know how to sign up, if anyone could share how to register? Posts: 2 Participants: 2 Read full topic
View Article