Number of sattelites
@jmcarthur wrote: I have been processing some files and I notice that every time Q=5 the number of sat's goes up to 13, 14, or 15. When I have a fix or Q=1 the number of sat's is usually 7or 8. Just...
View ArticleReach Emlid to radio
@v.muscio wrote: Hi, i have a question? i would like to buy a radio, what is the best, 3dr o rfd900?and how it works? thanks Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
No fix when post-processing RINEX logs from Reach
@ankit1 wrote: Not able to get fix.I've been setting both the units as single. And then use the RINEX to post process. Attached are the files, could someone throw me some help processing them and if I...
View ArticleA short film with Hexa and Navio2
@mlebret wrote: Hello, Here is a short film, raw sound, raw video (1080 to 720 from iMovie to Vimeo). No post processing like gello remove. Hexa is home made, gopro gimbal is home made with Storm32...
View ArticleClik here to view.
Taking the Sonar Values out of the Mission Planner
@bcatalbas wrote: Hello all, I'm using Navio2+RPi3 for my autonomous plane project. RPi 3 runs the latest version of ArduPlane (3.6.0) and uses a USB telemetry radio for communication with GCS. This...
View ArticleBase coordinate for rtkconv
@v.muscio wrote: i have a two device, rover and base.when i use rtkconv, for elaborate the base coordinate i don't view in the option-position- the coordinate of my base..why? if you are able to use...
View ArticleArduCopter 3.4-rc5 for Navio+
@staroselskiy wrote: Hello guys! We wanted to let users of old Navio+ boards know that they're not forgotten. We just updated our Debian repository. sudo apt-get update && sudo apt-get upgrade...
View ArticleClik here to view.
Reach to PC USB and a few comments
@Brent_W wrote: Hello, Can anybody help me connect Reach to my laptop via USB? I would like my Windows based survey software to find my NMEA output through my USB. I was looking at Intramaps....
View ArticleRinex version support
@Ves wrote: Hi What are the supported versions of RINEX? In Finland, it would be possible to get a free RINEX 1.3 Vesa Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Getting base station coordinates
@joepstar wrote: Hi, I have some trouble getting the exact coordinates of the base station. I've read the docs page a couple of times now, and when i'm setting up my 'base' reach following the steps...
View ArticleNavio2 Rover with two traction motors
@Andre_Silva wrote: Hello I am new here and I am Portuguese , I am doing an academic project with a Navio2 board and I have some doubts that prevent me from moving forward. The project consists of an...
View ArticleHow to calculate the accuracy from some fix value
@dicky wrote: Hi, maybe there is a formula to calculate many fix coordinate produced with post processing method. Is only average them?For example I have 2000 fix points. Is only average them?Thank...
View ArticleAccuracy calculatión
@dmct.92 wrote: Hello, I have been using emlid-reach to georeference my photogrammetric models. But in order to do some corrections y am in need of the accuracy of my files. How do I calculate them or...
View ArticleTroubles updating from 3.4-rc1 to 3.4-rc4
@Corrado_Steri wrote: Hello, tried to update and upgrade today (usual apt-get command). After updating i got a message: Unable to open file /sys/class/pwm/pwmchip0/pwm0/duty_cycle: No such file or...
View ArticleClik here to view.
Float with good signals and fix with bad ones
@TB_RTK wrote: So i think this is something many of us struggles with, specially float. I`ve been using reach alot lately and many times wonder what the h.. is going on. I could stand in the midle of...
View ArticleRTK Navigation Settings and setup
@Reach wrote: Hi there, I was wondering if there is something that is more comprehensive, then the tutorials out there, on how to setup/debug the reach rtk for navigation. Perhaps Igor, or another can...
View ArticlePixhawk and Reach RTK
@Peruano wrote: Hello, Could anyone help me about this items: I need to know what is the right setup of the antennas in the Reach system (attached to the Pixhawk). I need to know how to setup the Base...
View ArticleClik here to view.
Need help to increase accuracy
@dicky wrote: I just have post processed my observation. RMS Error is high, maybe it is because float result. How to cut only Q1 just plot in result?@mikhailavkhimenia, @ivereninov, @efedorov...
View ArticleClik here to view.
Pixhawk's binaries for ERB protocol compatibility
@Enio_Freitas wrote: Hi people, I'm having trouble uploading the custom firmware for ERB protocol in Pixhawk, as described in https://docs.emlid.com/reach/apm-integration/ I installed...
View ArticleSingle Copter - I Put all parameters correctly, but work like a Coax Copter
@dronearmy wrote: Good morning , sirs !I m follow all steps to make a single copter, i read the single copter & Coax Copter documentation. I m lost , what i done ? Posts: 9 Participants: 2 Read...
View Article