Navio2: GPS + MPU9250
@wfarid wrote: Hi there, I got a Navio2 board and have a few questions regarding the GPS and MPU9250 modules:1. Why are the GPS, MPU9250 and LSM9DS1 are connected to one SPI interface? Why not connect...
View ArticleOperation of NAVIO2
@hirochi_hirohiro wrote: Is there a way to switch to RC maneuvering from joystick operation? Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Release of Arducopter 3.4 rc2 for Navio2
@HenOz wrote: Hi Emlid Team I have 2 Navio2 copters waiting for 3.4 rc. Could you please advise the eta for this release? Many thanks Posts: 1 Participants: 1 Read full topic
View ArticleLocal coordinate system, network options
@Aero_Project wrote: Hi, I'm slowly moving forward with understanding how it works. New questions that crossed my mind, I'd really apreciate the help. If I put in the coordinates of the base from...
View ArticleNtrip vrs connection to rover, with no Base?
@fred wrote: Hi, I'm new to this so please bear with me. I want to connect my reach to a pixhawk and fly autonomous missions with mission planner and use the reach for rtk geotagged photos. My...
View ArticleImu output /streaming
@Andreas_Ortner wrote: i want to use imu data. is it possible to stream data from imu to tcpsvr ?can i have more information about this? andreas Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Radio test...get fix,,,,,great!
@dicky wrote: Hi, thanks and best regards to @bide, my friend. I have tried to use the radio and I have been getting great results. This is just first attempt to try the radio for connection. the...
View ArticleClik here to view.
High CPU -Ublox-SPI-to-TCP
@petter5 wrote: Using Navio+ on a raspberry2+, the CPU load for the process ublox-spi-to-tcp seems high. Is this "normal" or is there any way to optimize this process ?? see attached screen shoot....
View ArticleNEED Photos of monopod / tripod with REACH antenna connected to it
@z_zk_z wrote: Can you please post photos of your DIY / homemade / etc. REACH antenna on top of the monopod / tripod, which you use for surveying purposes? Please include the brand names and where you...
View Article2 network questions
@Andreas_Ortner wrote: First: I have a laptop with 3g modem and i use reach with usb connected. how can reach use the internet from the network with usb to etherneth over usb? reach is 192.168.2.153 g...
View ArticlePPP AR processing with RTKLIB
@Techingguy wrote: Hi Mates, I'm trying to process GPS RINEX data using RTKLIB by using the PPP- RTK method. I found in their forum it mentioned that PPP-RTK is the PPP-AR module, though it is...
View ArticleInvalid output when using ERB protocol
@jsc wrote: I have tried connecting a Reach module to a Pixhawk but was unable to get a GPS fix. I then connected the Reach module directly to a PC in order to examine the output. I can see that if...
View ArticleClik here to view.
RTK/ PPP data collection and processing
@Ian wrote: I have read over the topic below and have tried following the steps laid out in the tutorial with no luck.Previous Forum Topic: community.emlid.com What Are RTK settings for Base and Rover...
View ArticleClik here to view.
Raspi Cam V2 gimbal
@jeanleflambeur wrote: I made a small and compact 2 axis gimbal for the raspberry pi camera v2 for anyone who is interested: jeanleflambeur.wordpress.com Gimbal I ordered these motors and this gimbal...
View ArticleReach update 0.4.9 fix for a second
@dicky wrote: Is there any body here got same condition with me. Update reach to 0.4.9 then couldn't get fix steady, just a second then float. Does update to 0.4.9 the configuration changed? How to...
View ArticleNo fix with corrections over RFD900
@dicky wrote: Just now I use 16 air data speed, then tx power 20, result is I can't get fix quick, about half hours, then the range is only about 100m. Now I'm changing rate to 32, then tx power 10....
View ArticleIs it possible to connect reach trough internet?
@Corrado_Steri wrote: Hi, i have a LTE router on the rover and internet where the base is. I am wondering if it would be possible to connect the two reach modules trough internet. Corrado Posts: 3...
View ArticleBuilding a custom kernel and navio-rgb-overlay.dtb for Navio
@penguini wrote: Greetings! I own one of the original Navio boards and have been working on building a Gentoo-based system with a custom kernel based on EMLID rpi-4.4.y source as the...
View ArticlePower module question
@Gary wrote: I am thinking of using the power module for a completely different application and so I have a few questions ... 1) The outputs are 5v @ 2.25A on VCC, I and V sensing. What is the purpose...
View ArticleClik here to view.
The problem getting GPS signal in base mode
@saripudin wrote: Hello all I am new in trying Emlid Reach I have just tried Reach in newest firmware v.0.4.9 When I tried in rover mode, there is no problem about getting GPS signal. But when I...
View Article