Clik here to view.
Reach not accessible 0.4.9 update
@stefdas wrote: Hello, I just updated the 2 reach (base & rover) with the latest version 0.4.9. The Base station is now running properly the new version. Unfortunately the Rover is not accessible...
View ArticlePine64
@Roger_Orchard wrote: I am looking at the Navio2 to plug in to the the pine64 board. https://www.pine64.org/ 1 of the buses a copy of the Raspberry Pi (B?) gpio buses. Apart from the driver/host code...
View ArticleOne Base Connected to Multiple Rovers
@mohmdalgarni wrote: Hi All, If I connect multiple number of rovers to one base, how dose the base communicate (receiving and sending) with the rovers at once? What I know is that one base can provide...
View ArticleClik here to view.
Post processing and solution file
@dicky wrote: I have some questions: In post processing, can we see the result directly which output such as bluetooth in RTK method? I see the solution file, there are many strange value, such as Q1...
View ArticleReach and rtknavi at same time
@Andreas_Ortner wrote: Hi! Is it possible to use reach in real time plus rtknavi on my laptop at the same time? what i want do? i want compare in real time reach beta from rtklibexplorer / or new...
View ArticleAHRS Calibration level
@diego.s.dantonio wrote: Hi, I tried to calibration the Navio card without being able to get it. when I place the card over the ground, pitch and roll, it vary, when it should stay at 0 degrees. could...
View ArticleClik here to view.
Can't download rinex. Rinex in pieces
@Mgeol wrote: I made a static session today, but i can't download data, for some reason my single log file was spilted into 4 part, and i can't download any of them. Any help much appreciated. Pasted...
View ArticleIs quadplane supported?
@Corrado_Steri wrote: Wanted to know if quadplane (vtol) is supported on Navio2. I think so, since it should come standard on APM plane 3.5.0 and later.Since Navio2 has APM plane 3.6.0 i guess support...
View ArticleClik here to view.
RC doesn't work anymore
@gediminasgu wrote: Hi, I have Navio2 with RPi3 for a few months now. It worked OK until yesterday, when RC stopped working.I checked PPM input and see that signal from receiver is coming: Pasted...
View ArticleWhich PPM receiver I should buy for X6R Receiver?
@Chris_London wrote: Hi everyone! I have Taranis X9E with X6R Receiver and my question is which PPM reciver I should use to connect with Pixhawk 2.4.8 ? Thank you for your help in advance! Posts: 1...
View ArticleNavio2 and Tallysman TW4721 Tallysman multi-GNSS antenna
@Steve_S wrote: Hello I just ordered a Navio2 board kit and it seems I ordered the REACH GPS antenna accidently. Will this work with the Navio2? If not how can I switch my order? Posts: 1...
View ArticleMission Planner extremely slow downloading logs
@Corrado_Steri wrote: I have a problem, when i try to download a log from the board in mission planner it takes ages. Can the logs be downloaded from mission planner as in other boards? In case it can...
View ArticleHELP - Downloading configured Raspbian image
@Fabio_Ferreira wrote: Hello guys I'm beginner and new to the NAVIO2 / Raspberry universe and I have some questions: I have a Mac 15” Retina (OS El Captain), NAVIO2 and Raspberry PI 3 b. On the site...
View ArticleIRLOCK and I2C
@Corrado_Steri wrote: I am playing around a bit with an Irlock sensor. So far i haven't be able to make it work. Looking at the logs it seems that the apm doesn't talk to the sensor itself because...
View ArticleWhich hexa configurations are possible with NAVIO2?
@tobias-dahms wrote: Is it possible to use both hexa-x and hexa-+ configurations with NAVIO2 and how? Thx, Tobias Posts: 1 Participants: 1 Read full topic
View ArticleBase data no glo?
@Andreas_Ortner wrote: hi! i did send a data set to rtklibexplorer.. he did not find glo satellite data in rinex files... is that the reason why i can get different solutions when i use rtkpost?...
View ArticleClik here to view.
How to get a 14Hz result of reach?
@FisherLong wrote: hi there ,i'd like to record the raw gnss data for post-processing- UAV photogrammetry, I set the recording rate at 14hz（the screenshot ） how to get a 14hz result.jpg722x729 39.8 KB...
View ArticleNavio 2 - ArduCopter-3.4-rc3 is available for beta testing
@jlrogers2 wrote: So since we never seemed to get a response to anybody testing rc2, let alone official support from Emlid, here's another chance to ignore another beta release: ArduCopter-3.4-rc3 is...
View ArticleWrong EMLID image
@Guiboy wrote: Hi I have been using the last EMLID OS image (called emlid-raspbian-20160718.img) on my RPi2 & 3 with the same result : the booting sequence is infinitely running on a sequence like...
View ArticleUBLOX LEA-6T Connetions
@Proyecto_Stow wrote: Dear My name is Marcelo and I want to know if the RTCM-104 in LEA-6T for RTKLIB frames are sent by standard serial port or has an auxiliary serial port. I am evaluating the...
View Article