6S power module compatibility
@haxpanel wrote: Hi there,I'm planning to buy a 6s 10000MAH LiPo battery for my DYS D800 X4 quad and the question is how to use it with the Navio2? Where can I get a 6S power module that is...
View ArticleMy quad goes backward on a forward command
@Guiboy wrote: HelloI am close to my Maiden flight but I have some doubt about the best way to troubleshoot my channel 2 commandWhen I activate the Channel as for my quad to go forward it goes...
View ArticleClik here to view.
How do I set the collection interval with a Reach in rover mode
@Rabun wrote: I am trying to set the collection interval to use the Reach in rover mode to collect at one of the following intervals in seconds:1, 2, 3, 5, 10, 15, 30In order to upload the Rinex file...
View ArticlePython RCInput/PWM problem with threads
@larssoltmann wrote: I have written some custom multirotor control code in Python3 and after having some stabilization problems I have traced the problem to the RCInput and PWM output libraries. It is...
View ArticleClik here to view.
Wi-fi setting
@1115 wrote: Hi. I'm Han-seul.I have a question about wi-fi setting.First, please see the picture. error.jpg995x196 26.8 KB Why those are different? Second, After setting network name and Protocool, I...
View ArticleDoes anyone have the 0.60 SoftOSD binary?
@Klejs wrote: The download link is broken... /Jacob Posts: 1 Participants: 1 Read full topic
View ArticleAcquiring Video with a FPV camera on RPi
@Guiboy wrote: Hello Now my Quad is flying I can start my "real" project which is to acquire video and sound in FPV through the Raspberry.I know about the solution using gstreamer and the RPi standard...
View ArticleClik here to view.
Using a pair of Reach units as a GPS compass
@matt1973 wrote: Just for fun - and whilst we wait for the IMU logging to be implemented on the Reach - I thought I would experiment with using my pair of Reach units as a "GPS compass". A GPS, or...
View ArticleCompass Calibration Errors
@chris wrote: Hello, I've been trying to calibrate the compass on the navio 2, however I have unusually high offsets. (x: -659 Y: -460 z: 26) I'm using the raspberry pi 2b with the navio 2, and I have...
View ArticleAuxiliary PWM channels for Navio 2
@staroselskiy wrote: Hello guys, We wanted to let you know that as of now Navio 2 supports setting the different frequency on channels 9-14 and 1-8. This lets us use any kind of gimbals on channels...
View ArticleClik here to view.
Reach telemetry
@jbongers wrote: We are trieing to connect our Reach by telemetry, (we already succeed with only using wifi). We tried to do this with two sepperate RTK's that are not connected to a device and wanted...
View ArticleHow to uninstall APM
@Nathan_Belk wrote: I want to try building a different version (3.3.3-stable) as I read on their forum that the version that the navio 2 docs uses makes some changes. The changes are to the way motors...
View ArticleNavio integration trouble
@naosedna wrote: I'm having some trouble getting the Reach module to work with Navio+ on Arduplane. Setup is as follows: -Pi2 running the new emlid universal image-Currently I'm running the lastest...
View ArticleClik here to view.
Reach RTK with Arduino GSM connection
@thov wrote: Heya! I'm looking to set up a system using Reach RTK together with some kind of Arduino programmable MCu like UNO, YUN, Pro Trinket, or something. I need something prototyping friendly...
View ArticleDisable mavlink
@jbongers wrote: Hello, I am trying to do the APM intergration. The problem is that I can't figure out how to disable mavlink connection to do the Configuring radio for embedding corrections into...
View ArticleAPM intergration
@jbongers wrote: Hello, I am trying to do the APM intergration with the reach. I've got the problem that when I want to: "Configuring Mission planner to inject RTK corrections into telemetry" (this is...
View ArticleHow to install the firmware compatible with ERB?
@mariagf wrote: Hi, How do you upload the new firmware (ArduCopter-octa-v3.3.3-ERB.px4 for instance) in Navio+? I tried to use Mission Planner (Load Custom Firmware) but I got the error: 'No Response...
View ArticleLatest APM stable version
@robertb wrote: Please, can you (EMLID) provide me the link to the latest APM Stable binary ? I dont want to use a DEV version (3.4) . Regards. Posts: 3 Participants: 2 Read full topic
View ArticleCan not connect to APM planner 2.0
@caleb6211 wrote: I have tried to connect to the APM via UDP and via 3DR radio UART port. I can not connect at all,is there something that I am missing. Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Bluetooth parameters Reach
@gian74 wrote: My topographic program needs some parameters to connect to Reach.Can you help me? Pasted image1366x768 173 KB Posts: 1 Participants: 1 Read full topic
View Article