Exploitable Vulnerability on this real-time Linux?
@cstracq2 wrote: Are there any known vulnerabilities that can be used to exploit this particular real-time linux OS? There are some known for the original wheezy, but I do not know if any are...
View ArticleAccelerometer Calibration Timeout
@hedgey wrote: RaspberryPi2 and Navio2 running APM Planner 2.0.18 in Windows.Accelerometer calibration just timesout. I press the button in APM Planner and it just counts down from 40 to timeout. Any...
View Article4G/LTE modem for Navio 2/rasperry pi 2
@Koippa wrote: Hi, Does someone know working modems?? Does ZTE831 work??? I'm new on this rasperry systems. Posts: 2 Participants: 2 Read full topic
View ArticleApm and 3 axis brushless gimbal compatibility
@jstromsoe wrote: Hey all, thought i would repost here. Wondering if anyone has integrated successfully a 3-axis brushless gimbal to there APM project. Posted originally on DIY drones, but 30 views...
View ArticleFlying drone over UDP
@Daniel_Paley wrote: Hi, does anyone know if you can fly the drone over UDP from mission planner? We're also wondering if its possible to control the drone from the pi that its connected to rather...
View ArticleNavio2 & TiLT 500 frame kit
@jlrogers2 wrote: The makers of the Tilt Racer drone are soon to be releasing a new 500 frame for heavier loads, and I'm curious if anybody would have any insight to making it work with the Navio2...
View ArticleWhat coordinate system is Reach using?
@Dadnar wrote: Is it WGS? Sorry for the noob question. Posts: 1 Participants: 1 Read full topic
View ArticleRaspberry pi2, navio2 and Flir Lepton thermal
@JAR4x4 wrote: Hello! Im currently in the planning phase of a new project that includes use of the Flir Lepton thermal camera. My question is:Is it possible to connect the Lepton breakout board to the...
View ArticleClik here to view.
Navio 2 build and first flights!
@ogulbrandsen wrote: Hi! Just wanted to share my recent quadcopter build using the new and amazing Navio 2 !! This is an iteration over the previous design...
View ArticleAHRS issues
@Mikebert4 wrote: Hi all - a little light on the following conundrum would be appreciated! I'm having some trouble with AHRS on my Navio2 - it seems that when I rotate the board in pitch, it also...
View ArticleGoogle Cardboard and gstreamer
@Daniel_Grenehed wrote: Hi! i recently continued my quadcopter-project i had put on hold for quite a while, this time with hopefully more patience this time. So i read the navio+ docs and when i got...
View ArticleSwapping PPM channels?
@OzPup wrote: Is there any possible way to swap ppm channels with some linux magic? Perhaps piping ch6 to ch5 or something along those lines? I'd happily lose a channel to do this! My tx (9x) can only...
View Article(yet more) Wifi Issues (rtl8812au)
@Mikebert4 wrote: Has anyone managed to get a version of the rtl8812au drivers compiled on the new navio2 image? Been banging my head against it for a half-day now - if I get to a solution before...
View ArticleOne motor responding slower to RC commands
@Bradley_Scott wrote: I took my Navio 2 powered drone out for a maiden flight on the weekend. I had done all the pre-flight setups and checked my motors were spinning as they should and the props are...
View ArticleClik here to view.
Ntrip server problems
@ducatienergia_ebike wrote: Hi,I tested reach modules with success.Now I would like to set up a ntrip communication on a single module, but it remains in single mode.The module is connected to...
View ArticlePost processed Network RTK?
@matt1973 wrote: I've got a pair of Reach modules now, and I am getting some quite nice results using a single rover and post processing using either PPP or RTK and freely available base station data...
View ArticleIMU logging - what are your plans?
@matt1973 wrote: I know that you are planning on implementing the IMU logging soon, but I was just wondering what your plans were. Are you simply going to log raw IMU data, or do you have plans to do...
View ArticleProblem download rinex files
@cofhal wrote: I try download the rinex files with my phone but apper one error in the phone "error at download" Posts: 3 Participants: 2 Read full topic
View ArticleNavio+ advertised battery monitor shows 0V
@Daniel_Paley wrote: In mission planner I have tried to set the battery monitor to use Voltage and Current 3DR power moduleAPM 2.5+ volts... Is this wrong or something? The on screen battery voltage...
View ArticleTeraRanger One
@Al_B wrote: Will it be possible to connect the TeraRanger One to the former Navio+ I2C DF13 connector as it's described here or does this only work with the Pixhawk since the tone.cpp is only...
View Article