Clik here to view.
Hot Shoe cable
@Brian_Christal wrote: Hi, I would like to make a hot shoe time stamp cable but need to know where to connect. I can hold +3.3 then fall to ground when the flash connects. Based on the drawing below,...
View ArticleNAVIO2 control by Joystick
@simone wrote: Hello I believe that trying to control with the joystick using the NAVIO2 and Raspberry pi3.But can not.I was in reference to the following...
View ArticleUDP connection problem
@tomekr wrote: Hi AllI have a problem with udp connection I try to connect via ethernetWhen I start with ArduCopter-quad -A tcp:192.168.1.155:5760:wait i get "Waiting for connection on...
View ArticleHow to install rtklib?\
@v.muscio wrote: hi, i would like to know how install the rtklib?i have to create a GUI Aps? Posts: 1 Participants: 1 Read full topic
View ArticleLower speed sonar connection through I2C
@4ernov wrote: Hello, I'd like to create a custom obstacle avoidance application, which requires 6 (or more) sonars I plan to connect via I2C. I've chosen MaxBotix I2CXL-MaxSonar sensors, which seem...
View ArticleHow to connect antennatracker to Rover over wifi
@schuermannsebastian wrote: Hi, how would I go about connecting my wifi antennatracker featuring a Navio+ with my rover (Navio2) over a network connection?Up until now, I was not able to get the two...
View ArticleNo wifi in the field? Setting up the pi as a router for direct connection
@Wildtypitch wrote: Have a problem in that I can't connect my my drone in the field via ground control without a wifi router and ac power. Makes my drone pretty useless atm. Looking for solutions for...
View ArticleBL Heli ESC's
@Johannes_Zeiser wrote: Hey there,has anyone used BL Heli escs on the Navio 2 Board?I have read, that the don't work on the Pixhawk, so I am curious to know about the Navio. Posts: 3 Participants: 3...
View ArticleNo peudo actualizar each view, favor explicar con mas detalle
@ricardore69 wrote: Al momento de actualizar en la ventana logs no aparece nada, y en la figura como tuerca aparece esta opcion , pero espero 120 segundos que muestra en pantalla y no pasa nada, por...
View ArticleClik here to view.
Wifi Problem
@v.muscio wrote: HI, i have a problem to connect reach on wifi network.I tried to connect to my wifi but it doesn work.It comes out "sorry could not be able to reach yuor device".How can I manage the...
View ArticleWhere is the board schematic to download?
@Ahmadi wrote: Hi,I'm student and working on a project with raspberry pi 2 model b.I'm afraid I couldn't buy the NAVIO2 board. because of the restrictions.Is there any schematics of the electronic...
View ArticleClik here to view.
APM Navio Plus - EZ Menu
@memphisaartguy wrote: Greetings everyone. I have been working with gentleman with a Navio Plus. He's kinda new to Linux and the web page had him running all over the place. To help him out I wrote an...
View ArticleReach with Pixhawk Question - Export GPS track
@antimattercrusader wrote: This may be a dumb question and if so I apologize in advance. However, I am looking to interface a Reach RTK system with a Pixhawk and am excited about the potential. I'd...
View ArticleFrsky D8R-XP Failsafe issues
@Stu74 wrote: Hi All, I am pulling out my hair trying to set the no pulse fail-safe mode for the the Frsky D8R-XP receiver. I have tried numerous times to rebind, pressing the FS button with the...
View ArticleOrientation of Navio 2 when mounting
@romulus wrote: Hello, can I mount the Navio 2 180 degree rotated (opposite direction of flight) onto the UAV? I need the USB plugs on the other side. Maybe I would need to enter the orientation...
View ArticleCan i use x8r and x9d at navio 2?
@jhjh54 wrote: HI i have Navio2 i will build quadcopter,and i will use this RC and controller RC is :X8R controller is TARANIS_X9...
View ArticleClik here to view.
Low GPS signal strength with intermittent float and fix status
@wwells wrote: I am part of a UAV lab NIMBUS lab. We were looking to equip our fleet of UAVs with RTK systems. I am currently evaluating them. We are located in Lincoln, Nebraska, USA. The first...
View ArticleReach base module antenna physical movement tolerance
@aquila wrote: I am trying to figure out a way to mount the reach base module onto my current setup. My 1st idea was to put the gps antenna on a very long uav folding gps mount. It does move the...
View ArticleClik here to view.
Help to get Drone working without RC Controller (only USB Controller)
@chips wrote: Hello!I have a big Problem setting my drone up, i want to fly without an RC Remote only over a 4G internet stick and a laptop where i have connected a USB controller.I've buyed a Navio2...
View ArticleSet static IP for WiFi on Emlid Reach
@nickhuan wrote: I'm using Emlid Reach on a small drone for outdoor application where there is no other WiFi available. I created a WiFi access point on the microprocessor of the drone. The WiFi...
View Article