Ublox 6T cannot Achieve FIX solution
@agharbawi wrote: Hello, Im trying to get FIX solution on ublox 6T RTK the setup im using is (4) RTK‐GPS/GNSS, input rover data from a serial port and input base‐station data from a remote receiver...
View ArticleAutostart - control your processes with supervisor
@pierig wrote: Hello, There are a ton of ways to control the arducopter process on your rpi2. Many solutions have been shared on the forum already, but I haven't seen anyone mention this method so I...
View ArticleAccuracy: the the point
@Kristof_de_Werdt wrote: Allright, so the Reach has been existing for some time, and some people have tested it. If you use a single Reach and process it with NTRIP data from my country's VRS data,...
View ArticleClik here to view.
Navio2 Case
@dgrat wrote: I got my Navio2 and made a case. It is compatible with my shock mount (but can be used also without) and can be closed by M2.5 screws. For the sake of usability, the entrance to the...
View ArticleHow can I track my Navio 2 has been sent
@Guiboy wrote: Hello Isn't there any account login where I could track the shipping date of my recently ordered Navio2?I would like to possibly change the shipping method depending on the delivery...
View ArticleClik here to view.
Using Reach for landsurvey and more
@TB_RTK wrote: Hi, new to this forum Just bought Reach kit (backordered of couse, but hope you stock them soon?) So, in teory i think i can get this to work. Pri.1 is to get the rover give me a...
View ArticleNavio2 Rover not an option
@Alexis wrote: Hello, I am very new to everything (raspberry, apm,...)after instaling apm deb file, APMrover2 and Plane are not present. I can run and connect to ArduCopter-quad. I have been looking...
View ArticleErratic motors
@pierig wrote: So I am slowly progressing on my Navio2 build. I am using the R7008SB receiver with SBUS. I have calibrated my radio successfully in Mission Planer. Values go from 1094 to 1934. I have...
View ArticleIMU data from Reach Kit
@nctiglao wrote: The Docs section does not provide any guide on accessing/extracting IMU data from the Reach Kit. Does anyone have information on this? Posts: 1 Participants: 1 Read full topic
View ArticlePython/C++ control of Navio+
@xFirefly wrote: Hello, I wanted to manually control (from my application, without mavlink) the quadrotor with navio controller via c(python) code. So I wonder if it possible not only to obtain sensor...
View ArticleRAW Logs format
@ankur74 wrote: Hi, I just received my kit and setup seems to be working fine except few minor issues. First the data fields (Username and password) in wifi setup page for WPA Enterprise settings are...
View ArticleUsing 3DR radio for Base-Rover communication
@ElisaFRI wrote: Hi guys, I’m trying to use 3DR radio (v1.3) in order to connect two Emlid and transmit the BASE data through radio channel to the ROVER.In general I have this situation: I’m on a roof...
View ArticleNavio2 duty_cycle file missing
@mrdoornbos wrote: I'm getting: pi@navio:~ $ sudo ArduCopter-quad -A udp:192.168.86.105:14550 Could not detect RPi version, defaulting to 1 LinuxPWM_Sysfs: chip=0 channel=0 Unable to open file...
View ArticleNavio2 Arrived!
@lewma wrote: My Navio2 finally arrived today. Just wanted to say great job to Emlid on their Navio2 docs. With very minimal effort I downloaded the raspberry pi image and was up and running. I was...
View ArticleHow to start fresh?
@Nathan_Belk wrote: I'm building a new quad and its been long enough since I've worked on my old one that I don't remember what customaizations and stuff I had tried with it. Do I just need to...
View ArticleAbout an external wifi antenna on Reach
@rep wrote: Hi, It would be possible plug any external wifi antenna on Reach/Edison device?I can see a connector on Edison Board, but I read that using that you may disable the internal wifi antenna....
View ArticleMIT app inventor app for Reach
@ducatienergia_ebike wrote: I've recently created an app with MIT app inventor 2 to connect with Reach. I manage to connect, but I get only the source code of the page, not the position data. I've...
View ArticleNavio2 GPS Troubleshooting
@OzPup wrote: Hi All, just wondering if somebody can help shed some light on how I can get the GPS to work. I have tried external antenna as well. I just built the quad tonight and cant get a fix in...
View ArticleCopter works, but plane does not
@Johannes_Zeiser wrote: Hey there, my Navio is about to arrive, so I installed everything on my Raspberry as shown in the Docs. But I cannot get it to execute Arduplane. When I execute ArduCopter, it...
View ArticleBuilding APM Plane from source fails for navio2
@Mikebert4 wrote: I'm trying (and failing) to build apm-Plane for my shiny new navio2:The provided binaries for apm don't include Plane (see here)Below are the results of sudo make navio Checking...
View Article