@pierig wrote:
So I am slowly progressing on my Navio2 build.
I am using the R7008SB receiver with SBUS.
I have calibrated my radio successfully in Mission Planer. Values go from 1094 to 1934.
I have calibrated my ESCs individually and throttle works nicely.
When I plug in my ESCs to the navio and plug the LiPo, motors begin to run erratically. They seem to start and stop randomly and go at random speeds - and the throttle on the transmitter is still at 0%.
Performing the motor test in Mission Planer blinks the led red and blue, but the motors continue to be erratic. Only way to stop the motors is to either kill arducopter on the rpi2, or unplug the lipo.
This is not my video, my symptoms are more of less like this https://www.youtube.com/watch?v=2ijFHmLqzto.
Do you have an idea what I could be overlooking?
Posts: 1
Participants: 1