Kernel pwm driver
@pierig wrote: Hello, I just received my Navio2 today (yay!) I'm now looking at the PR you submitted to support it in APM git repo, and the fork that was created here Currently on the rt-image we...
View ArticleSpi csel limited on the raspberry pi
@anemos wrote: Hello, we want to use this following board http://ava.upuaut.net/store/index.php?route=product/product&path=71_63&product_id=121 for telemetry and uav control.But as the navio+...
View ArticleFull Navio Weight with accessories
@Nathan_Belk wrote: Does anyone happen to have the full weight of the navio+ as well the accessories like the GPS unit, power module, etc. Posts: 2 Participants: 2 Read full topic
View ArticleCan I see your drone with gimbal builds?
@Nathan_Belk wrote: I'm working on my quad and I want to add my gimbal and go pro. But I'm running into the weight barrier. I was hoping people would post pictures of their drones and gimbals so I can...
View ArticleNo luck with Reach
@drwino wrote: HI all. I've pretty much given up on Reach. When I got them they connected but it only got single fix. I was never able to get a RTK fix. I thought that maybe the new firmware 1.2 might...
View ArticleRadio control is not active or turned on
@Bradley_Scott wrote: I am in the process of setting up my Navio 2 board. I have managed to connect with APM Planner and configure the compass, accelerometers, etcI am using this 3dr PPM encoder:...
View ArticleClik here to view.
Off center mounting of Navio2 on a quadcopter
@jlrogers2 wrote: I'm curious what issues could occur if the Navio2 & Pi were mounted slightly rear from center of a quadcopter? Are there adjustments that can be made in the software, similar to...
View ArticleRelay for camera trigger?
@mayyiineyss wrote: Hello. We are thinking about using the relay in the Navio to trigger camera shutter. Is that possible? If it is, what pin can be used as relay? Let's say I wanna use servo pin 9 as...
View ArticleAssembly instructions for quanum 700 Spider frame
@arissluap wrote: Been looking for assembly instructions for the Hobby King 700 Spider 700 quad frame.Anyone have any? Posts: 1 Participants: 1 Read full topic
View ArticlePower module with a 6s battery
@Nathan_Belk wrote: How are you guys using the power module with a 6s batter? The shop says that the power module Supports LiPo batteries up to 4S so what about 6s? Posts: 4 Participants: 2 Read full...
View ArticleNewbie question
@John_Pierre wrote: Hi guys we're building an octocopter with these parts2 parallel 4s battery 10000mAh 10C40A ESCU3 motor 20A continuous current I've read that the navio+ power module can only handle...
View ArticleQuestions regarding REACH RTK KIT
@kempo wrote: Hello, I am interested to buy a REACH RTK KIT , but before this I have some questions: from what country the kit is shipped - I ask this because I want to know if it will be additional...
View ArticleDefault config Reach
@checco68 wrote: Hy Igor I created a new config with my credential for ntrip. How can set up the reach device to have always this config when I connect the reach every time I need ? thx Francesco...
View ArticleNavio 2 not recieved
@Johannes_Zeiser wrote: Hey there, I have ordered my Navio 2 last December, and on Jan 22. I have recieved the message, that it was shipped to me. Hongkong post tracking tells me that it left Honkong...
View ArticleDrone hardware for Navio2
@Dmytro wrote: Hi, all! Can someone advice shop in EU where I can buy all hardware for drone with Navio2 autopilot ? Or may be You can suggest me some DIY kit for this ? Thanks. Posts: 6 Participants:...
View Article3D Viwer
@subaltern wrote: Hi, I'm not a aircraft hobbyist, but I'm interested to make a 3D Viewer with reach. My plan is to create a virtual camera and move it according the position of the reach, of course...
View ArticleBuying Navio2 in EU
@Dmytro wrote: Can I buy Navio2 somewhere in EU ? Or Hongkong is only possibility ? Posts: 1 Participants: 1 Read full topic
View ArticleMounting options for Pi2 + Navio 2
@Baconrasher wrote: My Navio 2 arrived during the week, so I have joined the forum and this is my first post. I have a 'flying test bed' consisting of a much crashed and repaired F450 frame. I tend to...
View ArticleNavio2 img
@pierig wrote: Hello, Here's a new topic to discuss Navio2 specifics in regards to the new sd-card image and apm binary that were released this morning. The official docs are here:rpi2 imageapm This...
View ArticleReach max specs (update rate, speed, accuracy)
@seaowl wrote: I'm looking for a way to determine the relative position of drones in a formation (swarm). Reach and RTK seems promising, as GNSS electromagnetic field is already setup around the...
View Article