GNSS Predictor?
@timd1971 wrote: Is it gone? I saw it briefly when I had to reflash my 2 Reach RS units recently. I saw it oddly on the latest STABLE version of ReachView (v2.11.0)(not dev) which states it’s...
View ArticleWifi setting of Rover
@sygong wrote: Hi I am trying to use a wifi range-extender on ground so the ROVER can be covered by wifi during missions. I would like to ask: is there anyway to change the ACK_timeout and CTS...
View ArticleQuotation For Reach RTK Kit
@htunhtun wrote: Hello , I Interested to buy Reach RTK Kit. May I know it price ( Including Transportation Charges to Singapore ). Thanks. Posts: 2 Participants: 2 Read full topic
View ArticleClik here to view.
Question about 3g/4g usb dongle
@coldmoonbreak wrote: Hi~~~ I have a question about 3g/4g usb dongle for internet. I hope my Reach module can connect the internet by 3g/4g usb dongle. My 4g usb dongle is D-Link DWM-222. According to...
View ArticleClik here to view.
Corrupted files in Survey Section
@tiedtke wrote: Hi all, Yesterday I did a survey of some GCP’s for Photogrammetry. After some hours of walking in the region, and a lot of points collected, I returned to the office to download the...
View ArticleSecond IMU
@HAMA_Huss wrote: Hi I would like to know how to configure navio IMU (LSM9DS0) on ardupilot? I would like to use both. Thank you. Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
IMU3D not running
@selametsamli wrote: Obviously visible. Brick does not move. I ran the code by following the documentation but I was not productive. Ekran Resmi 2018-07-03 12.08.03.jpg2560x1414 862 KB Posts: 1...
View ArticleIs there post processing with a known point?
@jgl326 wrote: We have an upcoming mapping project in a remote area in South America. We have to place several GCP markers down in a large area that we know has no cell service (so no chance to...
View ArticleLooking for Reach RS datasets for post-processing tests
@wizprod wrote: Hi all, I am looking for raw datasets for postprocessing trials. I am currently waiting for my RS+'s to be shipped, but trying to prep myself, as I will have to use my units for a job...
View ArticleFeature request: show the distance between each point in ReachView
@erro.alfaro88 wrote: Hi. Will it be possible for a future reachview to show the distance between each point? How in the android mobile topographer pro app when you do surveys. Posts: 2 Participants:...
View ArticleCannot enable or set duty cycle on PWM channel
@minu wrote: Hello, I have a persisting issue with the Navio2 boards. I want to initialise 8 channels on the servo rail for using them as PWM outputs. I am setting the up in QtCreator. I cannot enable...
View ArticleClik here to view.
Take 20% Off Edge and Navio2 during July 4 Sale
@dmitriy.ershov wrote: Summer is in full swing and it’s the best time to get into drone hobby! We’ve prepared a great offer for all drone enthusiasts — from today and until the end of the week get...
View ArticleRouter unresponsive
@johnanderson wrote: Suddenly my router has stopped responding to my systems. All the systems are installed with windows 10 professional operating system. And the details for my router are Netgear...
View ArticleSet up Reach RS as Reference in MicroSurvey FieldGenius?
@timd1971 wrote: Have (2) Emlid Reach RS units as BASE & the other as ROVER. I know this is more a MicroSurvey FieldGenius question for them, which I will refer to them also, but they also refer...
View ArticleClik here to view.
Poor PPK drone results, how to raise Q1 fix ratio?
@luch816 wrote: I took my Reach RS as the base and mounted Reach onto my drone for accurancy test. I had tried different setting with PPK post-processing. However, the PPK result is Q1fix =77.1% and...
View ArticleReach directly to network switch ethernet port?
@pekka.silen wrote: Hi! We have cases in which we need to connect Reach directly to the ethernet port. I am having huge problems to do that. Have been able to see the virtual ethernet-connection in...
View ArticleAlthold altitude change then crash
@Barry_Bolton wrote: Went flying today and noticed that poshold was very unstable and that the drone would not hold but would rather do a big circle. Switched to Althold mode and brought it in to...
View ArticleI can't change the data rate in C++ for the GPS
@kevin.bertrand wrote: Hello everybody, I’m currently working on a project with a Raspberry Pi 3 and a Navio 2 and I would like to use the GPS at different frequencies. I tried in python and...
View ArticleUpgrades needed for Raspbian Stretch to Emlid Raspbian
@minu wrote: Hello, I have been recently forced to reconsider burning a new image of Raspbian as the Emlid Raspbian version I am using on the RPi model 3B doesn’t seem to work with the new RPi model...
View ArticleShipment date
@tloveu4949 wrote: I ordered navio2 on 29 JUNE, but i didnt receive any email about delivery situation. Just got a message about product order. And i mailed support team but nobody listened. Please...
View Article