Clik here to view.
Update 2018-05-25 ardupilot not starting
@kilianderoovere wrote: Hi, Before the update I had no problem in starting the ardupilot software. Now for some reason when using the emlidtool to start arduplane it won’t start. when trying to start...
View ArticleArrow Gold
@steven.blitzstein wrote: Has anyone tried using an EOS Arrow Gold RTK receiver as a Rover and connecting it to an Emlid Reach RS as a Base via BT or TCP? I am attempting to go down that road but I...
View ArticleClik here to view.
[SOLVED] Reach stuck (solid magenta led) after failed update
@adji wrote: I have bought reach in 2016 and everything is okay until today i perform update to one of reach unit. update process failed and after thats event, reach unit cannot function properly. i...
View ArticleUnable to use SiK radio after upgrade to latest image
@rodger wrote: After upgrading to the latest image - emlid-raspbian-20180525.img - telemetry via 3DR radios no longer works. Communication between the radios is fine. In Mission Planner both local and...
View ArticleHow to arm Navio2 without a transmitter?
@abanoub3000 wrote: Hey, We’re trying to arm the Navio with out a transmitter, so that we can make the drone follow target points being sent via Matlab. I found in some previous threads similar...
View ArticleBoat with Edge
@athtest wrote: Hello! Is it possible to use Edge with rc boat? Is it compatible with ardurover? Thank you Posts: 1 Participants: 1 Read full topic
View ArticleNo Steady Network State
@ovven.s.li wrote: When starting up my Reach module, the module does not stay in either WiFi or Hotspot mode long enough for me to connect with my computer. I have a Reach RTK GNSS module like these....
View ArticleHeating issues Navio2 - Raspberry PI3 new model B+
@sundru wrote: Hardware Running Navio 2 on the brand new Raspberry PI3 new model B+ Noticed that its generating a lot more heat and I believe this is due to B+ needing more power. I have two B+ board...
View ArticleShort tutorial create GCPs with Reach RS and EZsurv
@Steven_Wallace wrote: The following video is a brief tutorial/demo of creating GCPs using a Reach RS and EZsurv PPK software. Posts: 2 Participants: 1 Read full topic
View ArticlePPK stop-n-go using Reach RS and EZsurv
@Steven_Wallace wrote: Posts: 1 Participants: 1 Read full topic
View ArticleReach UAV Mapping kit or Here+ rtk kit
@santoshreddy wrote: Hi guys, I am confused between what RTK gps to be used with pixhawk Reach UAV Mapping kit Here + rtk gps enlighten me with pros and cons in the above kits and which one is best...
View ArticleContinuously getting 5 duplicate values
@naveengbhat1 wrote: Hi, I am using mpu9250 i interfaced with arduino uno,run a sample program but i am getting 5 duplicate value each and every time how to fix this problem?. Even i attached program...
View ArticleTrouble opening ReachView web page
@andresc4 wrote: same problem as here, I can connect to the hotspot, ligth is blue / white, sometimes I can acces to the website, most of the times no. DHCP server dont provide a gateway, I try to add...
View ArticleUnits change?
@timd1971 wrote: Is it even possible to change the units from Meters to inches or feet etc? If not, why? Cannot find a setting for the life of me? Thank you! Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Post Processing using RTKLib, not getting fix solution
@Manish_Sahu wrote: Firmware image and ReachView version. 2.4.3 b28 RTKLib Detailed problem description. How does observed behavior differ from the expected one? I am using Emlid reach Module mounted...
View ArticleClik here to view.
Navio2 Barometer not working
@hawk20002000 wrote: Hi there We are using the Navio2 with a RPi 3 with the latest Emlid Image (Stretch). PX4 is being used for the Drone and we have two of these setups (one is downgraded to Jessie...
View ArticleHdop in nmea messege
@ibrahimomar357 wrote: Hello , I have two emlid reach operating in RTK mode (rover - base). I chose to get the position output of the rover as nmea message format. hdop value in the message is always...
View ArticleMATLAB commands to NAVIO2
@abanoub3000 wrote: Hi, I’m trying to make my drone fly to coordinates in the world that is being sent to it from Matlab. Anyone knows how one could send packet messages from Matlab directly to the...
View ArticleThe blue led flashes all the time. Can't go to emlid rs.
@opanki.da wrote: The blue led flashes all the time. Can’t go to emlid rs. Can’t connect to emlid rs. The blue blue led flashes every 2 seconds. On Bluetooth is connected and the link there is. What...
View ArticleSurvey pole, bipod, tripod etc good suggestions and advice?
@timd1971 wrote: Survey pole, bipod, tripod etc good suggestions and advice? Should I be looking for standard height survey poles etc? Or with options to extend much higher? i.e. will it be...
View Article