TeraRanger One Sensing
@sunflower1 wrote: Hi, What kind of material will the teraranger one need to be able to work? I am looking to design an experimental setup for the drone fixed with a teraranger indoors. Thanks Posts:...
View ArticleNew Emlid Raspbian Stable image [emlid-raspbian-20180525] with Raspberry Pi 3...
@staroselskiy wrote: Hello guys! We wanted to share with you our new Raspbian Stretch release for Navio. Here’s the link. Here’s the overview of new features: Raspberry PI 3 Model B+ support is here!...
View ArticleRadio type
@Omar_Khaled wrote: Hi, I’m new here I needed help on the radio I have base and rover I need to buy them a radio but do not know the right product for them I’ve found so many products I needed to know...
View ArticleClik here to view.
3dr radio communication issue
@Relyew wrote: Hi, I’m having some trouble to send correction input from base to rover using 3dr radio, although it is working fine if I use TCP (i.e. gray bars are shown and fixed solution is...
View ArticleProblems with Reach Rs since the last update?
@erro.alfaro88 wrote: I want to make a fault report on the reach rs antennas. Since the last update (2.11) and reachview 1.3 have been failing. I did not have any of those faults with the last updates...
View ArticleClik here to view.
Arducopter doesn't start, missing pwmchip0/duty_cycle
@secheledelaruse wrote: hello - i’m having trouble starting ardupilot out of the box on a Raspberry Pi 3 B+ using the unmodified image downloaded from...
View ArticleLinux custom distribution and Navio
@kappe wrote: Hello guys, I’ve recentrly bought one navio2 since I need to add ardupilot functionalitites to a raspberrypi3+. I have a custom Linux distribution based on the Yocto Project so I can’t...
View ArticleTwo Reach RS+ or Reach RS + with Reach M+
@jorge.perez wrote: Hi, I wonder which option could be better for what i want: obtaining accurate positioning of different points (hundreds) in a photovoltaic solar farm. The two options i discuss...
View ArticleClik here to view.
Errors running emlidtool
@James_Duffy wrote: Hello, I’m using the latest Raspbian image - pleased to say that the wifi works on my Raspberry Pi 3B+. Image: “emlid-raspbian-20180525.img” After trying to start ardupilot and...
View ArticleTelemetry over Lan port not working
@Barry_Bolton wrote: Just noticed something I have a network card on my drone and it is linked to my PI 3 via Lan and Wifi. I changed the Wifi connection in supplicant.conf to my home network and left...
View ArticleReach, connecting to USB web dongle
@Cord wrote: Hello, i have aproblem. I use a reach with the last firmware update but the Reach do not connect to my Huawei 3372 Hi-Link Stick. The stick is suitably configured, if i put him into my...
View ArticleNothing published to mavros topics
@kvnchowx wrote: I am working with the new Navio2 Raspbian image that was just released (the one that works with the Raspberry Pi 3 Model B+). Right now I am trying to echo mavros topics to see what...
View ArticleNavio RTK rpi 3+
@gazhay wrote: Is it possible to use one navio as a base station and one handheld to achieve rtk sub-cm positioning over rpi wifi? Posts: 1 Participants: 1 Read full topic
View ArticleRemote camera and gimbal from GCS
@michalmpesek wrote: Hi, I built hexacopter with edge controler, is possible remote gimbal (Germsy H3) and camera (Sony A6000 or A7) from GCS? Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Edge Hexacopter with GoPro
@dmitriyershov wrote: We use a lot of drone platforms for testing our software and hardware here at Emlid: quadcopters and hexacopters, fixed wing and numerous rovers. We’ve decided to share...
View ArticleReach gps
@elrokerito_alternati wrote: I am from the Dominican Republic and I have the reach emlid but I have a problem the coordinates do not give me very accurate work in the utm zone with the ntrip and...
View ArticleZ information from reach compare to other GNSS
@Seb_B wrote: Hello, We have used 3 different GNSS in our drone (ublox, ellipse & reach). The Z information from ublox and ellipse are very similar (Z= 152,66 m) in contrast to the reach one...
View ArticleEDGE camera control
@michalmpesek wrote: Hi, How does the EDGE control the camera? For example, start stop recording, take a photo, autofocus. Camera Sony A6000 Thanks. Posts: 2 Participants: 2 Read full topic
View ArticleLogging Issue - Position set to NMEA format but outputting in LLH format
@steven.blitzstein wrote: While doing some testing with the Emlid Reach, I noticed that even though my Position format was set to NMEA in the display, the log files that were produced were in the LLH...
View ArticleWhy use Reach as the secondary GPS in a pixhawk build
@nijoe wrote: Before creating a new thread please refer to Quickstart guides for Reach and Reach RS. In case you are creating a thread about an issue it is necessary to provide following information...
View Article