Clik here to view.
Wifi problem: WPA2-Enterprise
@rep wrote: Hi family, We are having some troubles with WPA2-Enterprise credentials to connect Reach with university's wifi point. We are not able to connect to an wifi network with WPA2 ent. We have...
View ArticleGood end results and comparison
@Luke_Wijnberg wrote: We did some basic ground tests yesterday and got some very good results. Basically we placed over 20 control markers over a site 2km by 5km. We surveyed these points with a Leica...
View ArticleClik here to view.
How to trigger shutter of Canon DSLR Camera?
@mayyiineyss wrote: Hello guys! How do we control the shutter of a Canon DSLR camera without using gimbal? We are using APM 3.3 and Mission Planner. Also, how do we connect it to Navio? Thank you in...
View ArticleGPS antena connector
@dsmoura wrote: Hello Emlid, i suspect now of a bad connection on the gps conector, how can i fix it? I reflashed the SD card and after tweaking on the GPS cable i had a fast GPS lock, during my tests...
View ArticleReach module configured as base never gets satellites
@Charlie_Robinson wrote: Hi, apologies if this is covered somewhere else but can't seem to find any info. Setting up the Reach system as per the quickstart instructions, but for some reason whichever...
View ArticleAdvice for BKG Ntrip Client?
@edmund89sg wrote: I am enjoying the performance on my Reach devices so far. Currently though, I derive my base station from the International GNSS service, as I have no means of setting up my own...
View ArticleEthernet over USB - Configuration
@Sven_Eriksson wrote: Hello I managed to connect to my reach unit using ethernet over usb as described in http://docs.emlid.com/reach/software-development/#connecting-to-reach-via-ssh. I am wondering...
View ArticleLenght Cable antenna Reach
@checco68 wrote: Hy Igor to put the atenna on my roof I need a cable with more lenght.Can you give me some info to find it ? The lenght of the cable is it a problem for rtk process ? Thx Francesco...
View ArticleDesolder M8N
@Patrick wrote: Dear Navio-Users,I desoldered the ublox M8N chip and replaced it with a M8T, they should be compatible as it was already mentioned here.But it seems that it doesn,t work, i get no...
View ArticlePostprocessing GPS & GLONASS with logs from ReachView v0.0.4
@bide wrote: Can anyone share a simple command line workflow for RTKLIB? I tried with the new GPS & GLONASS setting, but RTKLIB seems to want to separate the GPS and GLONASS .pos files rather than...
View ArticleClik here to view.
Control Lag Issue
@jstromsoe wrote: Igors, @ivereninov @ivereninov I've been running Copter V3.3 on my QAV540 multirotor (6lbs) for a few months now, and I've got a strange control lag problem. Its obviously flyable,...
View ArticlePower module
@SimonK wrote: I think my powermodule is broken. I followed all of the instructions in docs to set it up, although the navio is not getting powered. Posts: 1 Participants: 1 Read full topic
View ArticleMoving Baseline RTK / Heading sensor
@Herms wrote: G'day Guys, I see that as of V 0.0.4 firmware, you now appear to support the 'moving baseline' RTKLIB option for the rover but I can't get this to work. Is this currently implemented and...
View ArticleClik here to view.
Not Achieving Desired Accuracy using RTK with UBlox-6t chips
@ankur6ue wrote: Hello, I attempting to get accurate GPS coordinates of a given position using RTK. I haven't purchased Reach yet, I first wanted to experiment on my own since I already had a couple...
View ArticleEKF issues causing crash/flyaway
@jstromsoe wrote: (http://diydrones.com/forum/topics/arducopter-erroneous-autopilot-causes-crash-1?page=1&commentId=705844%3AComment%3A2177438&x=1#705844Comment2177438). All,Had a flight...
View ArticleRFD868+ telemetry connection
@R_Cool wrote: Hello, I want to use the navio+ with the RFD868+. At this moment the RFD's are connected solid greenEarlyer i configured autostart sudo APMrover2 -A udp:192.168.137.1:14550 >...
View ArticleClarifying basic concept
@P3G wrote: Hello Navio Community I'm building My first Copter with a Navio 2 and here is my drone build:- Q450 frame- RCTIMER SL2212 920kv Motors- Navio 2 / Rpi2- Turnigy 9x with PPM encoder...
View ArticleIssues compiling rtl8812 wifi drivers
@Mikebert4 wrote: So I've been having some issues getting an ALFA AC1200 wifi card to work - I specifically wanted 5Ghz wifi to minimize interference on the 2.4Ghz band. The card I chose was the...
View ArticleUse a compass GPS instead internal compass
@StephaneCervetti wrote: Dear all,My name is Stéphane, I m working on GPS. I have created a new gps very accurate and knows his attitude, heading, velocity and its MOTION. However I would totally...
View ArticleGPS Ublox m8n GPS with compass
@alpa wrote: Can a "pixhawk compatible" external GPS Ublox m8n GPS with compass be used in conjunction with the Navio2? Posts: 3 Participants: 2 Read full topic
View Article
