Saving logs to external SD
@alobo wrote: Is it possible to define a directory in the external SD for saving logs? Thanks Posts: 2 Participants: 2 Read full topic
View ArticleRC Switches
@Barry_Bolton wrote: Just a quick question guys, Have a Taranis x7 and TBS Xfire running over sbus. Have strobe lights that i want to activate with my radio. I chose Input and set channel 12 to switch...
View ArticleMaking new files for RINEX logs with ReachView
@alobo wrote: The only way I’ve found to create a new log file (e.g. for post-processing RINEX data of a given point) is to switch off and on the option. Is there a cleaner way? (i.e., a save new file...
View ArticleHow fast does reach process and send position
@feepyj wrote: Working on using the reach in a moving application. Trying to figure out how quickly the Reach collects and sends the position fix back out. I see all of the time stamps at a 5 Hz...
View ArticleClik here to view.
Reach RS can't connect via Lora
@Jack_Xu wrote: I want use two Reach RS via Lora survey,but now i set Rover module correction input is lora communication,the picture is my set, 0204_1.jpg600x1067 61.4 KB , and the picture shows...
View ArticleMaking an Autonomous Water Rover using Navio2 ,3DR telemetry and Internet
@CHIRAG_SHAH wrote: I am trying to incorporate autonomous behavior in an existing project using navio2 and a 3DR 4333MHz telemetry module. The project is a Water Boat made on RPi 3. I would first...
View ArticleQuadplance Crash
@Barry_Bolton wrote: Tested my Quadplane and Navio2 out today. Armed in Qstabalized and and took off in QLoiter. About a meter from the ground the plane flipped on its head and on to the ground and...
View ArticleRaspberry Pi Configuration Documentation
@Al_B wrote: The closing double quote is missing for the wpa_passphrase command Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
EDAS Correction input - Not Implemented
@Knut_F wrote: Due to high mountains, I can not receive corrections from SBAS. I am therefore attempting to receive corrections from EGNOS via EDAS. When I connect to EDAS’s NTRIP caster without...
View ArticleTrying to install raspicam_node, but libraspberrypi0 is conflicting with emlid
@Tommy_Xiong wrote: Hi guys, I am trying to use ros to control the raspberry camera on my navio2, so I am trying to install a ros node called raspicam_node. I am using a raspberry pi 3B, and my...
View ArticleBetter antenna/quality for RTK module
@ago wrote: We are using two RTK modules - one as a rover and the second one as the base. The problem is that we only get fix for about 10-20%. We are working in Estonia. It’s an open field, so no...
View ArticleChoosing right camera for photogrammetry and Reach
@Adrien_Michez wrote: Hi there, We are thinking to buy a new camera in order to perform photogrammetric surveys. We will generally trigger this camera through a pixhawk but we would like to be able to...
View ArticleHighest accuracy in Africa - no cors networks
@pkroks wrote: Hi everyone. I’d just like to ask some advice and tips here regarding using the Reach RS to improve gps accuracy for aerial surveys using drones. I have a system that integrates well...
View ArticleAutomatically starting python script on boot
@feepyj wrote: I have a python script for processing and sending IMU data that i’d like to run automatically when the reach boots. Can someone help with how to do this? Posts: 3 Participants: 3 Read...
View ArticleClik here to view.
Trying to get a fix again
@steve.ARV wrote: So I once again I am trying to get our two Reach RS units (base and Rover) talk to each other for to get RTK solutions for placing Ground control. However I have a couple of...
View ArticleClik here to view.
No Telemtry Data in APM Planner with UDP or Serial Connection
@lafranch wrote: 1) Image and ArduPilot version. APM:Copter V3.4.6 (e707341b) 2) Detailed problem description. How does observed behavior differ from the expected one? I don’t get any telemetry data...
View ArticleAyuda
@colminerals.sas wrote: los saludo desde Colombia. en el mes de diciembre hicimos una compra de un RS EMLID base y rover con el cual hemos hecho pruebas en precisión submetrica manejando un rango de...
View ArticleHigh School Drone Project
@Logan_Steiner wrote: Hey everyone! My name’s Logan Steiner, and I’m a new high school Engineering teacher. I’ve been working a lot with VEX robotics at the high school level, but I want to push my...
View ArticleClik here to view.
RC transmitter not detected by Navio2
@Al_B wrote: I’m setting up a workbench to do hardware-in-the-loop (HIL) using the Navio2 and PX4 flight stack v1.7.3 release. However, I’m not able to to complete the radio calibrate in...
View ArticleRTKLIB convbin exclude system syntax
@bakalolo wrote: I would like to run convbin CUI tool to convert .UBX to RINEX but I’m unclear on the syntax to exclude SAT systems. do I put a -y marker for each system or use commas or what is the...
View Article
