Clik here to view.
Could GNSS signals from a particular direction be passively blocked from the...
@bide wrote: Say there was a large reflective wall blocking 90 degrees of view horizontally and from horizon to 60 degrees vertically. It could be a building or rock face, or a stand of trees. We...
View ArticleEdge power module displays incorrect Voltage
@Joban13 wrote: Hi Everyone I am configuring my edge fc and i seem to have a problem with the power module (connected to pw1 port)… it reads incorrect voltage… I use QgroundControl tuned for edge but...
View ArticleUV4L in Rpi 3 + NAVIO2 (emlid-raspbian-20170922.img.xz)
@Mohammad_Bhuyan wrote: Hi, Anyone has experience in installing the latest UV4L in Rpi 3 + NAVIO2 (emlid-raspbian-20170922.img.xz) Their instructions for installing in Stretch fails with: >sudo...
View ArticleClik here to view.
Unable to connect rtk2go, (recv error(114))
@muldolf wrote: Hi all, I am from asia country and totally new in this emlid reach, request for assist. I have 2 reach unit, plan to use 1 as base and another one as rover. Using own hotspot. Decided...
View ArticleProject tab in ReachView suggestion
@RTK_RTJ wrote: I’m setting up some project in advance in ReachView, and notice that when I move between projects, the settings change to the configuration you of the project you were just in. In...
View ArticleDOP and SNR
@camddexter wrote: Hi, I am wanting to acquire the reach rs, and ahaven’t had any luck finding out if you can set your DOP and SNR requirements in the app. Any info on this would be much appreciated!...
View ArticleNavio2, DragonLink and SBUS
@flyingw wrote: In my Taranis with OpenTX 2.2.1 I had sbus configured to send frames every 7ms to its DragonLink Tx module. At 7ms I had occasional flaky operation with a Navio2 flight controller and...
View ArticleRnx2rtkp option "ant2-postype =llh" always gives me Q=0
@bakalolo wrote: I’m having trouble getting any data from post process (rnx2rtkp from RTKLIB2.4.3)when I set ant2-postype=llh in which case it only gives me Q=0. This does not seem to be related to...
View ArticleClik here to view.
The signal quality drops after some time - cannot recover
@ago wrote: We are using Reach RTK (not RS) kit with 2 modules, one acts as a base. While usually everything works well, sometimes the signal quality drops. And after that, it doesn’t recover from...
View ArticleClik here to view.
How to do a survey in terrestrial RTK mode being that my base is unknown for...
@topoagrime wrote: Hello, I’m new to using Emlid reach. I am a surveyor using my Emlid Reach for collecting land points for topographic mapping and so on. however I am having difficulty starting a...
View ArticleClik here to view.
Ricoh GR IV camera triggering, duty cycle and period
@Adrien_Michez wrote: Hi everyone, We would like to trig a Ricoh GR DIGITAL IV with a reach rtk unit. We made custom cable following the available information on emlid website image.png1344x732 49.9...
View ArticleAyuda a conectarme por primera vez
@Mario_Lemus wrote: Necesito ayuda para poder anclarme y conectar el receptor a mi telefono celular. Uso la aplicacion de emlid y sigo los pasos descritos en la página de emlid pero no funciona....
View ArticleClik here to view.
A Few thoughts on Ground Control Points
@Brent_W wrote: Hey guys! I just wanted to share an idea I had the other day. One of the challenges (albeit not a huge one) of UAV mapping can be identifying the ground control points and ascribing...
View ArticleTuffwing components confustion
@tobi_kellner wrote: Hello, I am tentatively playing with the idea of building a Tuffwing fixed-wing UAV, using PixHawk. I am trying to understand the hardware required for integration with my Reach...
View ArticleNo telemetry. Still possible?
@jferfre wrote: Hello all! I’m Pepe Fernández, from Spain. My pleasure to introduce myself here. Absolutely no new to RC in general, nor in quads, nor APM. I’m gathering all stuff to put my Raspbi 2+...
View ArticleClik here to view.
GPS Ground Speed Zero when platform is moving
@esa.attia wrote: Hi, I’m seeing an odd problem where the GPS ground speed is being reported as zero when the platform is moving. I am currently in the middle of tuning my rover and noticed some...
View ArticleTap into Navio2 with Java
@fosos wrote: I would like to purchase a Navio2, but there are a few things I would like to verify. Thanks in advance. I am building a rover and the code is mostly complete, I need an accurate gps for...
View ArticleClik here to view.
RINEX L2 header
@RTK_RTJ wrote: Still seeing L2 information in my Rinex headers. When dealing with NRCAN PPP, I had to run the Rinex through RTKCONV to remove the L2 information. To perform PPK using a Reach Base and...
View ArticleReach RS network issue
@Grigori_Bereg wrote: Recently purchased the Reach RS with Reach module for survey drone setup. I had no issues booting the Reach module, and updating it. The Reach RS on the other hand, does not...
View ArticleArducopter 3.3.3
@nerbia wrote: Hello, I have bought the reach Kit and the version of the arducopter firmware that I have to use needs to be 3.3.3 (pixhawk flight controller) and I can’t neither change the firmware...
View Article
