Difference between Reach RS base and NTRIP correction
@wittich wrote: I have a difference between my tracks when I do the post-processing with the base data and with the nearby NTRIP data. The base was set with connected to the same NTRIP stream and an...
View ArticleIs the DRAGONLINK V2 R3 radio suitable for emlid reach?
@topoagrime wrote: I bought a radio DRAGONLINK V2 R3 is for the emlid reach? Can he send the data and receive the data? Posts: 2 Participants: 2 Read full topic
View ArticleTrouble collecting GCPs with Reach RS as static rover (on a pole) and CORS as...
@jantjj wrote: Same issues again today as 2 weeks ago: Went out to a job… client wanted a georeferenced ortho of a future construction site. Had an incredibly hard time collecting my GCPs again. What...
View ArticleRTKLib Base coordinate differences between versions
@Luke_Wijnberg wrote: HI all This has been driving me crazy! In comparing the differences between the old RTKLib(RTKPOST ver.2.4.3 Emlid b27) and the new 64bit one(RTKPOST ver.2.4.3 Emlid b28) I see...
View ArticleArchaeological Applications?
@rcampb wrote: Hello Everyone! I am wondering if there are any archaeologists on this forum that would like to share their experience using Reach RS for archaeological survey. I am interested in...
View ArticleReach RS demo unit for cross section monitoring on Rio Grande
@hd_ats wrote: Good afternoon All, I am looking for a demo unit to compare to GR5. I have an 8 year old project on the Rio Grande surveying cross sections and topography and bathymetry to monitor...
View ArticleGross record of the survey, how to download?
@topoagrime wrote: Gross record of the survey, how to download? Apresentação1.jpg960x720 71.7 KB Gross record of the survey, how to download? I am a topographer and need to download raw records for...
View ArticleTime clocks and Latency
@feepyj wrote: Does anyone have information on the latency between the GPS timestamp in the message and the time a) the message is sent out b) Ideas on how to look at the the time lag until it is...
View ArticlePPK workflow, how best to save time?
@James_Duffy wrote: Hello, I intend to use Reach RS in the mode highlighted below: image.png761x698 39.6 KB I have some questions about the differences in at which point in time you process your data...
View ArticlePPK method to set up base clarification
@bakalolo wrote: Under placing the base tutorial (https://docs.emlid.com/reach/common/tutorials/placing-the-base/) there are 6 different methods. I would like to use the “Post-Processed Kinematic”...
View ArticleTriggering the Reach RTK trough PWM
@dario.finderle wrote: So how is the implementation of PWM triggering of the Reach RTK going? I have a RedEdge camera triggered trough a PWM signal. This camera, on the other hand, has no hot shoe...
View ArticleTaking time stamps from image exif to calculate position
@dario.finderle wrote: Would it be possible to put the Reach RTK on a UAV (totally independent of the UAV) to constantly log position during flight, then later (after flight) get all the time stamps...
View ArticleRCIO failed to load
@Barry_Bolton wrote: rcio.PNG909x369 8.5 KB I am at the point where this Navio2 thing is going in the garbage and switching to Pixhawk or the cube. Everything was working fine. untill now Posts: 2...
View ArticleCannot connect to my local home wifi
@peeknot wrote: 04EFFCF0-013C-4F20-8AF7-925E10AC7BC9.jpeg3264x2448 1.85 MB A7BE3EE2-F597-4DDC-9542-97DF2C44AF24.jpeg3264x2448 1.83 MB . This is the printed output from the journalctl , ive been trying...
View ArticleLots of green bars but no base fix. Trying to understand
@datafromdrones wrote: It’s my understanding is that seeing a lot of green bars is nice but the number of green bars connected to satellites in a single constellation (eg. GSP, Galileo, etc) is the...
View ArticleTwo different elevations; did i doing something wrong...?
@DaneGer21 wrote: I usually never post process only because i can recieve corrections via CORs. Here is my “normal” workflow, and then ill explain my issue later. Set up Base module, and receive...
View ArticleEdge with Dragonlink V3 UHF Telemetry Long Range
@Akay_Yesiloz wrote: Hi all im use dragonlink v3 50 Km range and telemetry but which port in edge external telemetry rx and tx pin out adc or ı2c ? Posts: 1 Participants: 1 Read full topic
View ArticleHow to: from RTKLIB to Pix4D
@dario.finderle wrote: So I’ve flew my first test flight with the Reach RTK today, got the obs and nav files, downloaded Rinex data from our correctional stations and postprocessed them in RTKPOST....
View ArticleMissing Camera Events
@Tron wrote: ReachView Version: 2.8 for rover and 2.7 for base. Detailed problem description: Missing camera events during flight. RedEdge camera’s hotshoe pin triggers rover to record geolocation...
View ArticleEMLID Reach RTK not publishing
@magranat wrote: I’m having an issue with the Reach RTK publishing in ROS. I followed the nmea_tcp_driver quickstart and had no issues. When I run nmea_tcp_driver is says the Device is Connected, but...
View Article