Foolproof way to access ReachView without knowing IP address?
@Fenrir wrote: I'm at a university attempting to access my v2.3 reach, but I have no sure way to discover the IP address. I've tried fing, but there are ~240 devices, and none seem to be my device....
View ArticleClik here to view.
Small holder Land documentation in Ghana using the ReachRS
@Johannes_Eberenz wrote: Hello!We're very happy to share our experieces with the ReachRS in the field:http://www.landmapp.net/from-mapping-to-surveying/ We're a small startup with an innovative...
View ArticleModule offline after few days
@s.vercoulen wrote: Dear all, I can't browse my emlid reach module (Base) after using it a few days but it is pingable. I have to reboot the module to fix this problem. Does anybody know what the...
View ArticleClik here to view.
Positon Status sd values are not displayed
@Johannes_Eberenz wrote: Im running Reachview 2.2.7 in Single mode, on Reach and on ReachRSMost of the time, on the status page, the sdn sde sdu values are always +-0.000 m while the LLH position log...
View ArticleBattery status disappeared in reachview v2.2.7?
@Johannes_Eberenz wrote: running reachview v2.2.7, there is no more battery status?would be nice to have it back Posts: 4 Participants: 2 Read full topic
View ArticleHelp - choosing the best gps antenna
@Fabio_Ferreira wrote: Dear Colleagues, I have the NAVIO2 module and it is integrated with the Jetson TX2 module using the Tallysman multi-GNSS antenna (standard kit). I also have a 48v (40,000amp)...
View ArticleSimple q...for navio2 image...whats the root password?
@iriol wrote: what is the default root password?? am not talking about pi/raspberry....but the root account itself...searched everywhere and cant find it Posts: 2 Participants: 2 Read full topic
View ArticleClik here to view.
Cannot load custom ardupilot image. Need single copter X frame config
@micahmosier65 wrote: 1) Latest image with Raspberry Pi 3 and Navio 2 board.2) I need to use singlecopter in an X frame configuration and by default all that is available is the + frame configuration....
View ArticleNavio2 and Air speed sensors
@fredrikfalkman wrote: Has anyone had success connecting an airspeed sensor via I2C? I get some readings, but nothing useful.I should probably add that I'm running ArduPlane. Cheers! Posts: 1...
View ArticleQuadcopter flips and veers on take off
@kirtiprabhu wrote: I am yet to achieve a successful vertical lift off on my first quad. I have everything in place, Compass calibrated, Accel calibrated, RC calibrated. ESC calibrated, Flight mode...
View ArticlePackages
@regrarians wrote: G'day, In the absence of a 'contact' page for the EMLID company (correct me if I am wrong) I was interested in getting some clarity on what packages of items were required to...
View ArticleClik here to view.
Radio Calibration
@marcbabrar wrote: Hello, I recently updated to the new emlid image for navio2. What are the different modes 0: auto and others are manual, what are these configurations? I picked auto to get started...
View ArticleFrequency of measurement
@kiwikid wrote: Hi there, I am using firmware 0.4.9 and 1.2 image. I noticed that after doing the post-processing to generate the .pos file (rnx2rtkp), the time stamps do not necessarily occur at...
View ArticleGot my Navio2. Now what
@Barry_Bolton wrote: Morning everyone. I have not installed the Navio into my plane yet. I did notice that when I power the assembly via the power in on the RB PI that the LED on the Navio comes on...
View ArticleReach RS RADIO links -- please explain
@kevinnem wrote: Hello. I don't quite understand from the documents I see online that specs of the radio links between 2 RS receivers. Firstly, what do they come "built in " with. what is the range...
View ArticleReach RS extension connector and LoRa radio
@ox3hi wrote: Today i received my Reach RS and it looks very good. I have two questions:Are there plans for ready made cable to fit the extension connector, and the type of at mating connector? Are...
View ArticleRC Channel limitation
@marcbabrar wrote: Hello, If I am using Taranis -plus transmitter and X8R receiver by FrSky on my Navio2 via SBUS. How many RC Channels do I have available. I would like to activate all the PWM...
View ArticleHow to collect data for post processing
@l3technologycambodia wrote: Dear all, I have two Reach RS and I want to survey ground control points for drone mapping purpose. I have coulple of questions related to how to collect data for post...
View ArticleMavic Compatibility
@Kevin_Muno wrote: Is the Mavic Pro by dji compatible with your Surveying device? Posts: 1 Participants: 1 Read full topic
View ArticleUsing navio2 on top of another hat
@asura wrote: Hi guys, I am in need of using a powerful servo, so I will need to use a motor shield for my application. I was thinking about using this one in here...
View Article