Stable Release Date Estimate?
@coby wrote: @staroselskiy Hey George. Trying to be patient but I have copters to deliver and no news is not good news for those of us downstream. If I don't have stable code by Thursday we will need...
View Article[DRIFT]NMEA output diff from web view solution
@CazadorH wrote: hi All, my problem is the position output in NMEA format is different from the solution shown on web view .Miles away. firstly I setup two reach rtk module and can get RTK FIX...
View ArticleClik here to view.
External Reach Hookup 3DR Solo
@Jim_Mitchell wrote: I would like to use an external antenna to log raw GPS data. I mounted a Tallysman 3742 on the Solo but I think the mount and ground plane cause some shadowing on the internal...
View ArticleClik here to view.
Problem Downloading Ardupilot [2]
@dedezago wrote: Hi, Following the problem that was shown here: https://community.emlid.com/t/problem-downloading-ardupilot/5495 I now have this one when using the wget command: 2017-03-28.png1366x768...
View ArticleReach RS factory reset
@timvand wrote: What are the steps to reset factory defaults or to reflash the firmware? There are three ports/services presently available; 22/ssh, 2000/callbook, 5000/upnp. Posts: 3 Participants: 2...
View ArticleUsing 3 Reach?
@Rick_De wrote: Is it possible to use 2 base units to increase the accuracy of the rover? Either feeding 2 correction streams to the rover, or feeding corrections from 1 base unit to the other base...
View ArticleFree or Low cost NTRIP corrections in North Texas?
@Rick_De wrote: From what i've read Texas seems to be controlled by Trimble and i'm sure their corrections service is not cheap. Any ideas on where I can find corrections for north texas? Posts: 1...
View ArticleClik here to view.
Unable to run ArduCopter
@kashish.gupta wrote: Hi, I am getting the following error on my Rpi3 + Navio2 setup. It is similar to another post from a little over a week ago, but the solution was never posted....
View ArticleNEO M8T with RTKRCV on Raspberry Pi 3
@Jivomir_Arnaudov wrote: Hello, everyone! I am currently doing a university project and my goal is to find the position of a rover in real time. My set up is the following: 2x NEO M8T boards connected...
View ArticleClik here to view.
Help! Is this fixable or can I use the other UART port?
@erin wrote: I tried to plug in the 3DR radio to the UART port, one went in with no problem but the other port just fell right off.... Should I try to soldering it back or can I use the port on the...
View ArticleReachView v2.2.7
@efedorov wrote: Hey everyone, A new ReachView update is out. We've started shipping the shiny new Reach RS and user feedback is already coming in. Thanks for the fast reports! If you have ReachView...
View ArticleInstalling ArduPilot - New Navio2 docs
@dedezago wrote: Hi, I've been following the navio2 docs for the past week and just realized the new scheme deleted a part of the old codumentation for ArduPilot.On "Instalation and Running" it no...
View ArticleNew Emlid Raspbian Stable image [emlid-raspbian-20170323]
@staroselskiy wrote: Hello, guys! We'd like to let you know that the excessive Beta testing stage has officially come to an end and we are presenting you all our new Stable release for Navio2 and...
View ArticleConfirming system is working OK
@Barry_McCreadie wrote: I seem to have an issue with the system and what i am seeing. I have had the system setup, i.e. Base and Rover. Both units see the various satellites when in single mode, i.e....
View ArticleReachView App appearance
@Barry_McCreadie wrote: Today i was review the Tutorials and noted that the App appearance i have does not look anything like the screenshots in the Tutorials. I have ReachView v0.4.9.and Reach Image...
View ArticleDownload canceled and “This log is being converted. Please wait”
@antonio.arns1 wrote: While it was downloaded fron the Reach the connection was canceled when i removed the usb cable. After this i could no longer download, only the message “This log is being...
View ArticleCan't connect to the network
@B.rayane wrote: Hey, I have some issues with connecting to the network knowing that i have reconfigured wpa_supplicant.conf and i'm using Raspbian for Navio OS, when i do ping command i get unknown...
View ArticleFlashing Board Problems
@Barry_McCreadie wrote: This is really starting to hack me off. I followed the instructions provided implicitly. When the process finished and the re-boot section was happening the unit that i have...
View ArticleClik here to view.
Need Help with PPK processing
@eric.rutayisire wrote: I really need help with PPK. I am new to this but I am learning. I am trying to PPK a base station coordinates against a Reference base station in Minneapolis, MN. here is what...
View ArticleClik here to view.
Reach (rover side) second coordinates output
@Guillaume33 wrote: Hi all !This is my first post so first, thanx to all Emlid team and its community doing amazing things I'm using two Reach cards to get precision location on a pixhawk equiped uav,...
View Article