RTK Integration with DJI Phantom Camera - Necessary?
@dirtgeo.eng wrote: Interested to hear about others' experience pertaining to integration between camera and Reach...specifically between DJI Phantom (4 Pro) stock camera and Reach RTK unit. Has...
View ArticleTx transmit 4 channels - Navio mix and control 8 channels?
@AndyM wrote: Hi, I'm looking to control a large number of channels using the Navio board, as many as it can really. As an example, say on the UAV I have 8 channels (4 flight surfaces and 4 motors)....
View ArticleRC input in the Navio2
@Vava wrote: Hello! We're trying to get the RC input to work with Navio2. We have a Jamara FCX-6 Pro Tel transmitter and the receiver for it that is connected to the PPM input. We cannot see anything...
View ArticleAPMNavio + Python-Picamera bricks my Pi 3
@rob1 wrote: Install Navio Image, Enable picamera using raspi-config, install python-picamera, install apm-navio.Pi won't reboot, Green LED flashing 7 times. I have exaclty the same setup on my Pi2...
View ArticleNavio 2 GPS: no fix
@Jimmy_Hill wrote: Hi AllMy rpi3/nav2 has just connected to mission planner and is all calibrated, everything worked i go to the next instructions about changing the compass to number 2 and after a...
View ArticleClik here to view.
Broken ESC?
@tdyne wrote: Ok, so I tried to calibrate throttle response on my ESC's (DYS XS30A), but I only managed to calibrate 3 of 4. I tried to resolder the one not beeing calibrated, and I have tried...
View ArticleReach base module configuration
@chia wrote: Hello, I want to use my rover module in a drone and the base module in the ground in a known position and then do the post-processing correction. I would like to configure (set) my base...
View ArticleReach Dual Solution Output: Pixhawk & USB, possible?
@antimattercrusader wrote: I've built a pixhawk powered unmanned boat which is equipped with a Windows running computer, a USB echologger sonar unit and I have some reach modules. I would like to...
View ArticleSuddenly ar validation is low, float
@dicky wrote: This morning until 12.00am i measure some parcels. I got great fix data. But suddenly ar validation is under 3. Waiting about 30 minutes, then got fix again. Until about 12am, ar...
View ArticleReach rtk
@f.vanbellegem wrote: I ordered and paid a reach rtk kit because of a school project at 16 december 2016, I know that the reach modules were out of stock but does someone know when emlid is going to...
View ArticleReach WIFI Config
@Francesco_sisani wrote: Hy All sorry for the new topic but I want to know if it is possible to post a short tutorial about the wifi config I try to explain my problem I config in the correct way my...
View ArticleGPS data to variable
@Julien_768 wrote: Hi, is there a way to get the GPS Stream so that it can be used to my own script on the Navio2? thanks Posts: 2 Participants: 2 Read full topic
View ArticleHas anybody tested Mobius camera?
@Guiboy wrote: Hello I currently use a RPi Cam V2 for streaming video but up to now I did not find yet the perfect raspivid parameters to make it as good looking as an action camera. The quality is as...
View ArticleNO correction
@dicky wrote: I'm confused...Some day get correction from radio. Now, I'm trying my radio, no correction received. This is the video...
View ArticleI'm going to measure for post processing
@dicky wrote: Hi, now I'm going to measure a piece of land with single method. After my radio cannot transmit the correction. I will share the result. Posts: 1 Participants: 1 Read full topic
View ArticleIntegration with pixhawk
@roiyehu wrote: Hi,I would like to integrate REACH with Pixhawk. However, the serial port in my Pixhawk is taken for other needs. Is there another way i could connect REACH? Thanks in advance, Roi...
View ArticleNew Quadcopter. Help with the components
@man-d23 wrote: Hi community !! I am trying to build a quad-copter with the navio2 kit and my RPI 3. I am new to this subject so I did some research. I found this in amazon:...
View ArticleReach vdop with a quadcoopter
@Robert_Predosa wrote: Was curious if anyone in the EMLID sphere has any output data on GPS precision. (Tuffwing staff has promising results on a comparative study plot:...
View ArticleGyros still settling
@Anis_Koubaa wrote: Hello I have two navio boards. One is working fine when I arm it, and the second is consistently giving an pre-arm check error:Gyros still settling This error stays for a long time...
View ArticleFeature requests: Camera trigger based on distance and Mavlink integration
@Shaddow wrote: Here's a couple of items that would help with camera integration on the Reach. For the short term, could we add the ability to trigger a camera based on distance travelled as an...
View Article
