Fix in kinematic, but not in static?
@dicky wrote: Hi @ivereninov @efedorov @bide, now I'm trying ntrip mode in static, but no fix. And change to kinematic, just a few seconds, get fix. Before I'm trying wifi mode was same, just float in...
View ArticleGalileo
@Francesco_sisani wrote: Hyany news about the firmware to receive galileo signal ? Thx Francesco Posts: 5 Participants: 3 Read full topic
View ArticleHow to connect reach to rtklib?
@dicky wrote: Hi, @ivereninov @efedorov @bide and anybody know how to connect reach to rtklib? When i open rtk navi, input tcp required ip and port. IP is reach IP, but what is the port? I wrote 80...
View ArticleClik here to view.
Speeding up altitude lock?
@rrr6399 wrote: I have noticed that the Reach's altitude can take a few minutes to settle to within half a meter of accuracy compared to the base station altitude while both on the ground. Also, I had...
View ArticleClik here to view.
DIY portable hotspot & Send correction through free ntrip to LTE hotspot
@TB_RTK wrote: Just tested this with free ntrip service www.rtk2go.com Sendt corretion signals from base connected to local wifi, over internet (fiber) to www.rtk2go.com, this is broadcasting and...
View ArticleCan't connect to router after v2 beta flash
@87YJ wrote: I flashed my reach using the v2.1 beta file. The update completed successfully and I see the new reachview app when restarting and connecting to the reach via its self generated wifi...
View ArticleV1.2 to 2.1.5 firmware upgrade EPIC fail
@jmiranda wrote: i have failed miserably at flashing the firmware upgrade (have tried at least 10 times with the same result). It works fine re-flashing back to v 1.2, but i cannot get the upgrade to...
View ArticleClik here to view.
3DroneMapping completes PPK trials
@Luke_Wijnberg wrote: 3DroneMapping has been testing a PPK system for the past year to itegrate into our daily workflow. The point of PPK (or Post Processing Kinematic) is not just to improve internal...
View ArticleSolution button
@dicky wrote: Hi @emlid team @ivereninov @efedorov, If I may suggest something about solution button. It is a button on status page which function is like solution. For example button name is "start"...
View ArticleHow to convert erb to known extension
@dicky wrote: How to convert erb file to known extension such as rinex file? Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Precision of Millimeters with >100km baseline
@Terseven wrote: Hi all, Just to share my results and tell how satisfied I am with my reach units. I'm from Asuncion, Paraguay and here we don't have any permanent base reference (CORS), so I have to...
View ArticleGPS improvement
@Mohammad_Ardestani wrote: Sensor ADNS3080 does working with navio 2? Posts: 1 Participants: 1 Read full topic
View ArticleBluetooth connection with android phone to use ntrip app with corrections...
@Pedro_Vargues wrote: Hello. I want to know that if it is possible to use reach connected by Bluetooth with my cellphone running ntrip app that use the corrections from a network in Portugal called...
View ArticleClik here to view.
What are binaries?
@kenneth.f wrote: Hi, I've heard a lot of talk about binaries after I started working on a UAV. I have even installed them. But i don't know exactly what it is, and finding information about it on the...
View ArticleReachview 2.1.5 radios not working
@devindraper wrote: Hi,I have 915mhz off brand radios rover is UART 38400 and Base is USB-To-OTG 38400, this and works fine in Reach Image 1.2 app 0.49 but When I flash to 2.1 app 2.1.5 beta the the...
View ArticleWtb: used reach kit
@Riki_Montano wrote: Hi, I want to test the Reach rtk for basic land survey, but right now I cannot afford a new one, please let me know if you have one for sale, thanks. Posts: 1 Participants: 1 Read...
View ArticleMax ppm channels for Navio2
@sicherlich_nicht wrote: Hi,could you tell me how many RC-Input Channels Navio2 support?im using a Jeti-Receiver with 16 Channles. Since the Navio2 has 14 RC-Outputsi assume that it can at least...
View ArticlePinout and circuit diagram for Navio2 ?!
@sicherlich_nicht wrote: Hi, i find the documentation for Navio2 not very comprehensive.a more detailed cirquit diagram and pinout for the Navio2 would be helpful, thats not enought: (but better than...
View ArticleHardware issue on GPS becoming erratic on my Navio2?
@Guiboy wrote: HelloGPS has now become erratic on my Navio 2 board. Sometimes it just works fine and sometimes I just get 0 satelitte. This happens despite same locations, same weather and same...
View ArticleStatic option
@dicky wrote: When I do static method, for a few minutes could get fix. Then i was waiting for a few minutes for collected points. Then i tried to move the rover, the point move very slow. Then I...
View Article