Clik here to view.
Power to the servo rail?
@kenneth.f wrote: Hi, We're using a Navio+ with a Raspberry Pi 3. We read in the documentation that we need to use a BEC to power the servo rail. But when we attached the PPM the red LED on the X8R...
View ArticleClik here to view.
Navio 2 LED, PWM and STM32 clarification
@CodeChief wrote: According to the documentation (https://docs.emlid.com/navio2/Navio-dev/rgb-led/) the Navio 2 LED is directly connected to GPIO pins, which means it is no longer connected to a...
View ArticleCompass 1 no calibrate
@simonpmg wrote: Hello, I followed the instructions to calibrate the compas and always gives me error number 1. why does it give so much trouble? Posts: 8 Participants: 2 Read full topic
View ArticleTelemetry outputs other than -A & -C don't work
@finst wrote: On my Navio 2 running Arducopter 3.4 I've been trying to feed telemetry to an osd as well as to a gimbal. In order to do this I need at least three telemetry streams, as one of them goes...
View ArticleClik here to view.
Heading off by up to 40° after two spins on yaw axis with my quadcopter
@jetpathar wrote: The problem:I'm having this problem since the begining I'm using Navio2, when I'm spining on the yaw axisafter two turns at about 90°/sec the heading is completely off, up to 25°...
View ArticleArm drone without GPS - we need to be able to control the drone through...
@ResearchTeam wrote: How can we get our NAVIO to arm without GPS through DroneKit?I have tried several steps but for some reason, the solutions proposed on the drone kit website didn't work for us: We...
View ArticleClik here to view.
Windows Tablet Survey Application
@surveyor wrote: Hey Everyone, I've been working at a few different projects lately with the Reach. I wanted to have similar functionality to the survey controllers I currently use for work, ie -...
View ArticleReachView 2 beta - connection problem
@ducatienergia_ebike wrote: Hi everyone,my compliments on the efforts for a new ReachView!After successfully flashing my Reach units, I connect to the hotspot, but I can't load the page at...
View ArticleReachview 2 beta setup
@jmcarthur wrote: Any one have a list or screen shots of their setup on the new reachview? Maybe I am lazy but I seem confused with this. I do like the new screens it just not connecting in my brain...
View ArticleNavio 2
@Mohammad_Ardestani wrote: Hi guys I'm starter and I have some questions Can I use navio 2 to make an octocopter? Posts: 1 Participants: 1 Read full topic
View ArticleDJI Matrice 600 and Reach RTK
@gryzzlydev wrote: Hello all, I was hoping to use the Reach RTK for accurate geoTagging of images on a dji Matrice 600. I'm a little confused on how the two RTK units will communicate. Just to...
View ArticleClik here to view.
First flight never succeed
@zhanghaijason wrote: Hello, I am new to UAV and trying to build my own drone. The frame I use is QAV250: http://www.lumenier.com/products/multirotors/qav250. And the picture of my drone....
View ArticleCan't connect Navio+ to Mission Planner
@sdunster2016 wrote: Hi Guys, I have everything powered up and I'm trying to connect to mission planner on a windoughs machine.Navio+ on raspberry pi 2B with IP: 192.168.1.80 (Mission Planner is on...
View ArticleClik here to view.
No reachview, no LED but ssh is possible
@zzangjinsun wrote: Hello. Recently, I reflashed my firmware with image v1.2 and I have a problem with ReachView. I can connect to the Reach through ssh, and also connect to the Device Information...
View ArticleAre there any real time correction services for L1 only receivers?
@gryzzlydev wrote: Hello,Just curious to know if there are any real time correction services such as OmniSTAR http://www.omnistar.com/Home.aspx that will work with L1 only receivers? Or more...
View ArticleHow i integrate (Arduino + IR LED + Navio2) For triggering CANON EOS Camera?
@EM_Farih wrote: Hi,I have a Navio2 and EOS M3, i want to ask you all, how i can remote shutter the camera using ir led while the camera is bringed away by rc plane.. i thing about using arduino for...
View ArticleBase plate
@gryzzlydev wrote: What are some recommendations for a base plate? Are you guys cutting your own out of aluminum flashing or something? Posts: 1 Participants: 1 Read full topic
View ArticleMission planner
@Vishal_Rana wrote: Hi , I am trying to integrate reach with my Navio 2. So for now i have connected my Navio2 with reach through Uart and on the Usb my 3Dr 915mHz radio goes. My laptop is connected...
View ArticleChange server port on new beta reach
@Corrado_Steri wrote: Hello, it looks like server is not here anymore /home/reach/ReachView/server.py Anyone could, please let me know how to change server port on new reach beta? regards, Corrado...
View ArticleOne to Many
@Multirotorcraft wrote: Hi @emlid. V2 is fantastic well done. I have a couple of questions. 1) will a reach base station now give corrections to multiple rovers?2) I want to replace SiK telemetry and...
View Article