Reach led alway red, no ReachView interface
@dzuliani wrote: Hi, I've bought 4 Reach units and with two of them I'm in troubles.In this post I want to ask help for the first one. I was able to correctly configure the WiFi access. Now I'm able...
View ArticleDirect access to Navio2 sensor data
@Amgad wrote: I’m relatively new to the Navio2 board, I would like some advice/help on how to read the sensors data on-board the Navio2 board. I am aiming to use the Navio2 board as the flight control...
View ArticleUse RFD900 and usb together
@Andreas_Ortner wrote: Hi! i have sucessfully setup my rfd868. it is connected to uart. Is it possible to use usb port at same time? for example for output solution or to use intel edison ethernet to...
View ArticleReachview App Feature Request - Time Mark Button
@jwalsh wrote: Would it be possible to add a button to the Reachview App that would have the same functionality as triggering a time mark? This would be extremely useful if you want to use a Reach...
View ArticleQGroundControl Accelerometer Calibration
@marstonstudio wrote: I am unable to complete the Accelerometer calibration using QGroundControl on my Navio2 with APM:Copter V3.4-rc4. When I complete the orientation steps, I see a message in the...
View ArticleEmlid Reach Antenna
@stefano wrote: Hi,We use a Tallysman TW4771 as emlid antenna.We see only 5 gps satellites (with good SNR) with clear sky and 20m from buildings. And we have not fix solution from Reach. Have you...
View ArticleRTKLIB without ReacView
@dzuliani wrote: Hi,Id like to disable ReachView and control rtkrcv with some shell scripts. My aim is to test reach for repeatability issues as already described at...
View ArticleThrottle output
@Vootele wrote: Hello, we just had our first flight with Navio+ & Go Discover.There's something wrong with the throttle. Motor starts running at somewhere around 2000 and full throttle is around...
View ArticleManned aircraft autopilot system
@chaddrz11 wrote: Hey everyone, This might sound like a bit of a crazy idea, but that's what we're here for! Anyway, I'd love to build an autopilot system for my (manned) light aircraft (Zenith 601...
View ArticleReach used to calibrate a gyrocompass
@bide wrote: I had a requirement to calibrate a gyrocompass to an accuracy of 4" (arcseconds) or 0.001125°, and here is how it was done: I took Reach out to a rocky outcrop on one side of a valley and...
View ArticleClik here to view.
Missing events in events.pos
@Stephane_B wrote: Hello,I try to post process 78 images with a Sony camera and a hot shoe adaptereverything goes well with RTKPOST in kinematic mode I would also like to use the RTKPOST SINGLE mode...
View ArticleDrone flew away when notebook battery died and stoped base corrections
@Enio_Freitas wrote: Hello everyone! I was doing an RTK test in a simple flight, when the battery from my notebook died. It went off and turned off the base corrections. The aircraft flew away. Is...
View ArticleClik here to view.
Super Offer! REACH RTK KIT For Sale!
@Aero_Project wrote: Hi, I've bought the Emlid Reach RTK Kit in July because I planned to build a new Quad. My plans has changed, as I received a different job offer and I'm taking it. I've used the...
View ArticleReach Magnetic Variation output
@indmaker wrote: As I used the GARMIN 19x HVS gps, it output the magnetic variation in $GPRMC packet.But when I tested with the REACH, it doesn't. And I searched about it and find out that if a gps...
View ArticleIO Co-processor
@thomasm wrote: Hi I am using PX4 for a quite some time now for fixed wing UAVs, and recently acquired a Navio2, as I thought it would allow fancier controllers thanks to the processing power of a...
View ArticleVarious questions: Wifi sharing, power consumption, latency, effect of...
@fraser wrote: It really looks like Reach is what I am looking for. My project will be tracking several (maybe up to 20) moving vehicles on a track. The track will have good wifi coverage as this is...
View ArticleIssues with obtaining fix
@Luis_Bonilla wrote: Hello, I have issues with obtaining a fix with the reach. I let the device attempt to communicate with the satellites, but after an hour or so I am unable to obtain a fix with the...
View ArticleExternal GPS and compass not recognized on Navio2 UART
@navio2noob wrote: Hello Forumers, I have plugged in an external GPS/compass combo into the UART port of Navio2. When I start arducopter, I get the following error: pi@navio:~ $ sudo ./arducopter-quad...
View ArticleNavio2 PWM problems with QuadPlane
@strobelite1 wrote: I am working with a team that is building a quadplane. We are using a navio2 board, a RPi 3 and a recent version of Arudpilot SW (downloaded in September). We have started doing...
View ArticleHow to find exact Reach(Base) position
@Siddhant.Virani wrote: Hi, From my yesterday's Experiment with Reach carried out at an Open field with clear sky, I found out that even though I had 10 Satellites showing me with more than 45 SNR...
View Article
