Reach NMEA specific format "On" or "Off"
@indmaker wrote: I am using two reach gps. Is there any way that I can receive specific format like "GPGGA, GPRMC"? If emlid reach doesn't support it, Is there any one who knows how to make it? Thanks...
View ArticleConfigure RPi 2 Model B from scratch
@gegham.hg wrote: Hey all, Getting error while trying this code example: ./AccelGyroMag -i lsm Selected: LSM9DS1Error: Can not open SPI deviceError: Can not open SPI deviceSensor not enabled Please...
View ArticleError while building APM on Navio+ from sources
@Hodei_Abrego wrote: Hi everybody, So, a few days ago, for no apparent reason, the sd where I had the raspbian image emlid-raspberrypi2-raspbian-rt-20150401.img, which also had Arducopter installed...
View ArticleReach on windows phone
@inadvins wrote: I want to connect reach to ntrip via lumia 650 by enabling hotspot on it. But every time when reach tries to connect on hotspot on lumia 650, lumia hangs out and it wont connect to...
View ArticleRover, Base, Ntrip correction
@v.muscio wrote: Hi, i have a question i have a rover and base two reach emlid device. I woul like improve the quality of survey.I have a ntrip connection server. is possible receive on the rover the...
View ArticleMake own Caster
@dicky wrote: Hi, anybody know how to make our own ntrip caster? I have no experience about it. I only know access ntrip caster, not own it.Thank you Posts: 1 Participants: 1 Read full topic
View ArticleError: "Raspberry Pi 2/3 with BCM2709!"
@sixtimesseven wrote: Hi After multiple tries, I still get this error on my Raspberry pi 3 B (with BCM2873...):Error: "Raspberry Pi 2/3 with BCM2709!" I saw one other guy with the same problem, but I...
View ArticleLog Split in one observation
@dicky wrote: Hi, I would like to observe about 6 hours. then now I try to download the rinex, the log split into 2 files. How to configure the log in order to in one observation I got one file.Thank...
View ArticleClik here to view.
REACH, can not reach FIX status
@sshangpeng wrote: I tested my reach in field, there is no obstacles blocking the skyview, see the following figure. And there are seven satellites with high SNR level (45-50), see the following...
View ArticleClik here to view.
Navio2 RPi3 High Internal Compass Offsets - Still struggling!
@jasonkschreiber wrote: Hi All, This still seems to be an issue. There are alot of posts about this but it still seems to be a problem. I'm still getting inconsistent compasses error. When calibrating...
View ArticleClik here to view.
Reach RTK+pixhawk Rover gps problem
@Lee wrote: My Drone and PC Configuration. configu.JPG958x552 33.8 KB I Think Base is correct. Because the data is coming in 'Gps Inject of Missionplanner' . Like this. However, Rover seems to be a...
View ArticleAPM serial port numbers on Navio 2
@Wildtypitch wrote: Hard to find out exactly but which serial port in APM corresponds to the various ports on the Navio2. Havent seen this simply explained anywhere. I'm using an uart to s-port...
View ArticleCopter 3-4-rc4 on Navio2- strange brehaviour
@tomekr wrote: Hi AllI run ArduCopter 3-4 rc4 on Navio2 i lunch it by typing following command :ArduCopter -A /dev/ttyAMA0 -C tcp:192.168.1.155:5760:wait > /home/pu/starup.logI connected micro...
View ArticleClik here to view.
Reach and Pixhawk problem: momentary communication failure makes the aircraft...
@Enio_Freitas wrote: Hey guys, how is it going? I have been testing Reach in RTK mode in my quadcopter. My base setup: Base Reach connected through Ethernet over USB to a notebook with Mission Planner...
View ArticleClik here to view.
Navio 2 Barometer Problem
@seckin wrote: Hello Emlid I'm having trouble with my navio 2 barometer. My results are as the pictures. I tried with different Rasperry but couldn't fix the issue. I have rp3 under it. There is...
View ArticleImpossible to update 0.03
@dzuliani wrote: Hi, I've just bought 4 Emlid Reach RTK units, Now I'm trying the first one and the the WiFi setp procedure was Ok and finally I was able to conifgure the unit to reach the network...
View ArticleWIFi 802.11 AC
@futureresearchcenter wrote: Hello i just bought Navio 2 and raspberry pi 3 but i am wondering can i use the Alfa Network AWUS036ACH Long-Range Dual-Band AC1200 for the fpv (gstreamer) and telemetry...
View ArticleRTK with VRS base, no access to the caster
@dzuliani wrote: Helloafter uodating to ReachView version: v0.4.9 it was impossible to reach my ntrip caster from the MLID rover. As I'm the manger of the ntripo caster I can monitor every guest which...
View ArticleClik here to view.
Reachview "Fetching available logs" never fetches logs
@alfredafutu wrote: blob.jpg720x1280 222 KB Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
How interpret results from RTKLIB - ratio aspect
@Magda_Chmielewska wrote: Hi guys, can you help me interpret results from my static session? Basically both reach unit was running in a single mode, first one I used as a base station, second one i...
View Article