Clik here to view.
Reach does not go from single to float
@Franz_Helmli wrote: Dear support team, I finally got the 2 reach modules working and also got nice RTKplot connection. The problem is: only single, no float. base is setup at 1.5m heightrover is...
View ArticleHow to select UAV frame?
@zhanghaijason wrote: Hello,I am considering building a smaller UAV with navio2, of which the size is less than 300mm. So could anyone tell me how to select the right components such as motors,...
View ArticleCannot detect REACH IP address
@Alok_P wrote: Hello friends Yesterday I received REACH RTK KIT. Im trying to configure REACH device on my MacBook. I completed Edison Setup. I am using NMAP on MacBook and put this command on...
View ArticleNavio+ for sale: $115.00 + shipping
@Brandon_Smith wrote: Never got to actually finish my build because of just lack of time to work on it. So I might as well sell it to someone that may put it to use. Selling My Navio + board. Never...
View ArticleClik here to view.
Sigro Pilot: Android Parallel driving app + Reach RTK beta test
@ivereninov wrote: We believe that Reach has great potential to be used in precision agriculture and recently we have partnered with Sigro Pilot to deliver a solution for parallel driving. Today we...
View ArticleClik here to view.
Reach stays on single solution, no float/fixed
@Michal_S wrote: hey there, Got the reach yesterday, put a couple 5x5" steel ground planes under each antenna, and been trying to get a float/fix solution to no avail. configuration is pretty much...
View ArticleClik here to view.
Why can't I retrieve the .deb files anymore
@ADSB2016 wrote: Screenshot (5).png2160x1296 17.8 KB Guys, What's up with this? Any ideas? Posts: 1 Participants: 1 Read full topic
View ArticleRaspbian update and ArduCopter beta
@staroselskiy wrote: Originally published at: https://emlid.com/raspbian-update-and-arducopter-beta/Hi there! We wanted to share with you some good news about the updates we’d been working on for a...
View ArticleConnection to gcs via mobile
@Johannes_Zeiser wrote: Hey there folks...I am in the final of building a navio drone for school, and I am now having a problem...I do not have a full IP adress on my umts stick, so I will have to...
View ArticlePlay music or audio through rotors?
@FPVdude wrote: So I came up with this idea that maybe there could be a way to put the APM in a mode where your able to play sound through the motors while in flight. I thought of this while i was in...
View ArticleAcceptable CPU load by accompanying applications
@Gary wrote: Apologies if this question has been asked before but I could not find it. What are you recommendations regarding acceptable CPU load imposed by other applications running on the Raspberry...
View ArticleClik here to view.
Reach refresh rate for camera events
@Brian_Christal wrote: Hi, I'd like to add a Reach to my fixed wing for recording camera locations. How often does it refresh? My Pixhawk refreshes at 10 hz. The image below shows camera events...
View ArticleClik here to view.
Cannot transfer files to my computer
@keepclicking wrote: Dear Sir,I have tried using the command line but I don't know exactly what to do.I have connected my Windows 7 computer to the same LAN that the reach unit is connected to and I...
View ArticleSingle rover solution
@youngzone wrote: hello, I read from a few posts that it's possible to use a single reach module on the drone if there is CORS base station nearby. To my understanding, the rover should get real-time...
View ArticleRaspi camera not working after beinfg shielded
@Johannes_Zeiser wrote: Hey there, I have installed aluminium foil on my camera to shield he interference for the gps, and now the raspberry pi is refusing to detect it...The shielding I have...
View ArticleCan the reach modules be updated inside a building?
@jmcarthur wrote: Or do you have to set it up outside to do updatesI just received the reach modules and don"t wnt to mess it up nowThanksJim Posts: 3 Participants: 2 Read full topic
View ArticleRadio control via PPM only (no connection to GCS computer Mission Planner etc.)
@navio2noob wrote: Hello Everyone, I just built my first quad using Navio2. Currently it needs internet connection to GCS computer Mission Planner to fly. I use a radio controller via PPM (Futaba...
View ArticleHow to make ESC Calibration Program
@simone wrote: Hello I am making a program to perform the calibration of the now ESC. This video in the reference, has created a program ① turn on the power.② Enter the maximum output value of the...
View ArticleClik here to view.
My custom build
@FPVdude wrote: This is my first quad, I had originally built the quad on the standard 450 frame then took it out and immediately crashed it shattering it to peaces. I then took the top plate to the...
View ArticleRaspberry Pi 3 OS Image RT Autopilot?
@Joan_R wrote: HI.You know where I can get image for Raspberry Pi 3 Autopilot RT. Thank Posts: 2 Participants: 2 Read full topic
View Article