Best long range WiFi practices for copters
@Postal wrote: Hello folks! I've been recently trying to establish reliable WiFi communication between ground station and navio. My target is to have consistent connection between 0.5 - 1 MB/s in...
View ArticleTake flight temperature vessel 2 and stored in txt
@juan_jose_casto wrote: Here in my city (Sevilla) Spain makes a lot of heat and wanted to know navio2 temperature in flight create this script that I want to share. > #Python scripts created for...
View ArticleClik here to view.
RC problems
@ghincea_theodor wrote: Hi , I have some problems with the connection with RC. eroare.png1366x768 20.5 KB I use a FUTABA T14SG and Navio2. Thanks Posts: 1 Participants: 1 Read full topic
View ArticleWhich es the more tested version for navio2 for hexacopter?
@Vicent_Mayans wrote: I would like to know which is the most stable version of Arducopter for navio2 (hexa). I tried several versions even 3.4.rc1 (strange behavior with Loiter).A recurring problem is...
View ArticleClik here to view.
Reach with Velodyne Puck LITE
@Mayehem wrote: I am getting ahead of myself on this topic but maybe there are others who have dove into this possible combination already? Velodyne Puck LITE lidar is light weight and has some...
View ArticleClik here to view.
Cannot see secondary compass on Navio2
@markvanhaze wrote: I get no readings in Mission Planner for the secondary compass. Do I need to enable it somewhere? Untitled-2.jpg1268x872 165 KB Posts: 4 Participants: 2 Read full topic
View ArticleClik here to view.
Third crash hexacopter
@Vicent_Mayans wrote: 16-06-01_21-32-36.bin (543.4 KB) After 1 minute in auto mode has started crashing down to the ground. What was the cause? Speeding? At the end three broken propeller and landing...
View ArticleClik here to view.
Broken DF13 Housing on Bottom of Reach Unit
@amadson wrote: Hey guys, I went to plug the DF13 cable to the bottom DF13 housing while trying to test the GPS timestamp feature, and when applying a normal amount of pressure the housing broke off...
View ArticleIntegrate REACH with pixhawk, antenna issues
@youngzone wrote: hi, I am planning to integrate reach on the uav with pixhawk as a secondary GPS for accurate geotagging. I wonder what's optimal size for the metal plate for both the rover and the...
View ArticleNeural Kalman filter
@Vicent_Mayans wrote: I've been researching since I 've tried Arducopter 3.4.rc1 and has some problems with the flight mode Loitier . It seems that this version has been replaced by NKF ( neural...
View ArticleGPS connection diagram with Navio2
@viru409 wrote: Hi, can I get the GPS M8N connection diagram with Navio2 because in docs section MPU9250 and GPS both are given at same port. I put MPU9250 at given spi now how can I attach the GPS?...
View ArticleApm installation in Navio + and Navio2 with one click Pads
@juan_jose_casto wrote: As some people to start with the navio + or navio2 costs you a bit and end up leaving the project, I created a repository of scripts which installs apm and apm and video...
View ArticleNavio 2 with Reach / Fix vs. NoFix / Optical Flow / IMU
@kronos wrote: Hello, I have several questions and thought I would summarize them to one post: I look to positoin a drone very accurately during a waypoint mission,and the drone shall reach the same...
View ArticleNo reaction execpt for throttle input
@Gerbaum wrote: Hi,I have got a problem with my newly build Navio 2 Quadcopter.After disarming and with slow props moving my copter reacts only to the throttle input of my RC.No reactions to Yaw,...
View ArticleNavio2 starting troubleshooting
@Ghincea_Theodor1 wrote: Hi, After I install the image and all the libraries I tried to start the APM, but it didn't start. It looks like this: enter link description here What can I do? Thanks....
View ArticleClik here to view.
Acceptable Vibe values?
@markvanhaze wrote: vibes.jpg1080x348 60.6 KB This is what I am getting now and just wanted to ask what kind of values other people have and consider acceptable. Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Yaw due to compass offsets?
@markvanhaze wrote: compass-offsets.jpg1251x830 168 KB In loiter I dont have "toilet bowling" but the quad tends to yaw and if I let it for a while, it even gets into a semi spin and I usually switch...
View ArticleError in video streaming
@71430835 wrote: while applying exactly what is written in the documents concerning video streaming we are getting this error : ERROR: from element /GstPipeline:pipeline0/GstH264Parse:h264parse0: No...
View ArticleNavio 2 ARM issue
@andersonpaac wrote: Navio2/Raspberry Pi2B/ArduPlane(docs) I Completed Radio calibration and was attempting to do the ESC calibration - motors won't start. The ESC does beep and is connected to the...
View ArticleNavio 2 ESC Calibration Issue [VIDEO]
@andersonpaac wrote: Unable to calibrate the ESC followed the docs from the ardupilot docs. Attached video Posts: 1 Participants: 1 Read full topic
View Article