Can't start APM after updating Navio2
@Nathan_Belk wrote: I updated my Raspberry Pi image to fix the gimbal issue and now I can't get APM to start. I get the following: pi@navio:~ $ sudo ArduCopter-quad -A udp:192.168.0.54:14550 -C...
View ArticleGNSS positioning service portal of Regione Piemonte and Regione Lombardia
@Francesco_sisani wrote: Hy Igor Next I want to test this service http://www.spingnss.it/spiderweb/frmIndex.aspx CAn you tell me if all services (mountpoint) are available in your app or can you...
View ArticleOne Reach unit to supply corrections?
@Howick wrote: I have been pondering for a while - Can the Reach be set up in Rover mode but at a known location, then provide it with the llh so that it can broadcast corrections to another GPS? I am...
View ArticleClik here to view.
Number of Waypoints with Navio+ and Raspberry Pi 2
@mariagf wrote: Hello! Could someone tell me how many waypoints we can use with Navio+ on Raspberry Pi 2? Can we increase this number? (and how?)Also, what is the maximum number of waypoints you have...
View ArticleNavio2 RPI 3 - default Raspbian
@seregus wrote: Hi, I do interested in my own distro of Raspbian to work on RPI3 and Navio2 - I was setting up a lot of different things in this distro for RPI 2 + Navio+ and making everything again...
View Article4G telemetry problems
@Vootele wrote: Hello everyone.We are team from Tallinn, Estonia and we are building long range UAV based on Hobbyking GoDiscover and Navio+We have managed to get UAVcast script to work, however...
View ArticleRTKLIB datums for REACH
@edmund89sg wrote: Quick question here, for my mapping work, I have included the local Geoid in REACH's RTKLIB. For context, my location is Singapore and we use SGeoid09 and gives more locally...
View ArticleGetting out, too much tinkering :(
@Nathan_Belk wrote: I've gotten to the point where I've spent too much time on a drone that doesn't fly. is it ok to list parts and stuff here I'd like to sell off? Posts: 1 Participants: 1 Read full...
View ArticleProblems with Mode Auto Navio+
@sara wrote: Hi,Last week I did a lot of testing with my Drone with Navio+ and Raspberry Pi 2.But I have some problems with mode Auto, sometimes it makes the route well, but other times it doesn't...
View Article4g LTE Verizon usb620L problems
@ADSB2016 wrote: I purhased 2 Verizon 620L usb modems. I have used modeswitch and have enabled it to modem mode and have been able to get it recognized and booted up upon start-up however I have no...
View ArticleSelling off my stuff
@Nathan_Belk wrote: Reducing stress and freeing up time has made me decide to end my DIY Drone hobby. As such I'm going to get rid of all my drone stuff I've bought and collected. All together it...
View ArticleAPM Installation
@Sean_Kelleher wrote: So, I am a beginner using both Linux and Multirotors. What I am trying to do right now is get my quad working as a pure remote control vehicle before I move into more autonomous...
View ArticleREACH Galaxy s7 centimeter accuracy
@sigster wrote: Hi I am wonder how this work I have Samsung Galaxy s7 and I was thinking buy one REACH to get centimeter accuracyHave anyone try this leave the REACH in your car and walk round with...
View ArticleClik here to view.
Drone won't fly!
@SimonK wrote: I have done all the setup listed in emlids docs. My qbrain esc is connected to navio+ via the pins. But when i try to connect my battery to me setup my esc starts beeping. I looked it...
View ArticleNavio changelog
@JAR4x4 wrote: Hi there Emlid staff! First I want to give you cred for the amazing work you guys are doing! I have a request, lately there has been som changes to the Navio code to get stuff working....
View ArticleRaspberry pi 3
@Guiboy wrote: Hello!Just to be sure everything is ok, I strictly followed raspberry pi hardware installation instruction with the new 0408 Emlid disk image.When I start APM with the command "sudo...
View ArticlePreArm check RC not calibrated
@haxpanel wrote: I'm setting up my first quad with Navio2 and ArduPilot. The APM Planner keeps telling me "PreArm check RC not calibrated". When I go to the Radio calibration area I can see 4 out of 8...
View Article4g lte gsm at&t? long range fpv quadcopter
@wielandgeorg wrote: So I've been learning and learning about all this and I'm still wanting to build a long range quadcopter but now i'm starting to have my doubts if its possible in the USA? i have...
View ArticleClik here to view.
Quad-copter spins in a circle whilst in air
@Daniel_Paley wrote: Does anyone know how to make it so rudder is in the center when the joystick is in the middle? My drone just keeps spinning in circles. (Its not a problem with the joystick I've...
View ArticleSonar Sensor on Navio 2 Running ArduRover 2.51
@chris wrote: Hello, I've been having trouble getting the sonar sensor to show a voltage/ distance on mission planner. I am currently using aLV Maxsonar -EZ by maxbotix. I have it the analog pin...
View Article
