Spektrum DX6i -> Lemon RX DSMX -> PPM - Problems
@Tveitan wrote: I have just recived my Navio2 and can´t wait to start using it. First of all I´m kinda new to all this so it may be that it is something obvious I´m missing. My Problem:I can´t get any...
View ArticleRx and Mavlink Telemetry in one?
@antonvh wrote: Most rx/tx go bidirectional these days. Some even send telemetry in proprietary formats, like frsky. The setup I'd love, though, is a single Rx module for radio and telemetry and on...
View ArticleReach NMEA output accuracy fixed at 3.0 meter
@Thomas wrote: Hi guys, We were able to setup and test the Reach in Bluetooth mode to send NMEA data directly to our Android devices.. pretty cool. Although the geolocation (lat/long) was still quite...
View ArticleClik here to view.
Configuration parameters missing in ReachView
@jstromsoe wrote: Any idea's why I cannot access the normal settings file when connected to Reach? If I click on any other settings file the details populate below. But if I click on the...
View ArticleReach w/ RFD900 & 3DR (or similar) combo
@amadson wrote: Hi all, The title says it all. Can anyone confirm if putting an RFD900 on the rover and a 3DR (or similar) on the base will work? Cheers,AM Posts: 1 Participants: 1 Read full topic
View ArticleBad GPS Antenna
@HyperGuy wrote: Hi Emlid, I've been trying to get my GPS antenna to make a reliable connection. It does connect however when I move the antenna on the test stand it disconnects. I think the antenna...
View ArticleBarometer pressure values are not unstable
@engharsha wrote: When i run barometer example it shows very unstable reading. I converted pressure to altitude. Altitude is also not stable when board is fixed. But emlid site says navio has high...
View ArticleProblem with reach module
@cofhal wrote: I have one problem with one rech module Connect the module to power, and initially led change the color, but then is permanently red. in my phone Wifi post apperar connectedto the Post,...
View ArticleClik here to view.
Navio2 - 3DR radio
@dgrat wrote: I noticed that the radio is working in general with Navio+. With Navio2, it seems to work only in general, the radio indicates send and receive, and with external tool, the data seems to...
View ArticleBase NMEA output
@Almdal wrote: Is it possible to configure the "base" device to output NMEA messages in addition to the RTCM corrections somehow? Is it i.e. possible to configure the output of the "single" solution...
View ArticleIssue with Navio2 with a potential flyaway condition
@i-copter wrote: I am letting the community know of a potential serious issue with the Navio2 that can result in a fly away condition. I have discussed with the developers over the course of several...
View ArticleWhat are plans for an iPhone/IPad iOS App and if so when?
@Rabun wrote: There would be a very large number of potential Reach users that have both iPhones and iPads like your ReachView app for droid devices. Posts: 5 Participants: 3 Read full topic
View ArticleWill Reach be able to use the Gallileo satellites and what radios will be...
@Rabun wrote: I am working with a registered land surveyor using Trimble RTK. His experience is that when you have a lock on 5 or 6 Gallileo birds they can penetrate the most dense pine forests in...
View ArticleClik here to view.
No RTK connection between rover and base
@Jonathan_Bailey wrote: I'm having difficulty getting any kind of connection between base and rover. Here's my setup:- both units connected to home network (192.168.2.141 and 192.168.2.228)- both...
View ArticleLogging external data from Arduino over UART
@MellowYell wrote: Hi Navio people! I'm trying to work out how to read incoming serial data via the UART or USB port and save it to ArduPilot's log file. Details:Flavor: ArduPlane. Fixed-wing...
View ArticleProblem with Reach Boot
@lewissw wrote: One of my Reach devices will not work. When it is plugged in, it immediately has a magenta light and will not allow me to connect to it.I have flashed the device with the current...
View ArticleUnstable compas
@R_Cool wrote: Dear community, Recently I have lots of problem with my compass. I calibrated it many times and after that it seems to work fine, but the time after that it won’t work anymore. Every...
View ArticleMission planning causing telemtry lost
@jbongers wrote: Dear community, Recently I have a major problem with my mission planning and my telemetry from the rover to my PC and controller. The problem is that when I run my mission planner and...
View ArticleNot be able to home correctly on mission planner
@jbongers wrote: Dear community, My problem is that I’m not able to home my rover with mission planner when I want a new mission. When I write my new mission to my rover and turn the rover on GPS I...
View ArticleBattery issue
@blackjack wrote: Guys ive zippy 3000mah 20c rating 4s battery. I used battery for 2 days. I put on first time charge with imax b6 charger. I set all necessary things for charging. Wen i start battery...
View Article