Linux-RT?
@mpaperno wrote: Hello, Does the Linux version currently on Reach devices use an RT-patched kernel? TIA,-Max Posts: 1 Participants: 1 Read full topic
View ArticleReach storage space
@mpaperno wrote: Hello, What is the storage capacity on the Reach? More importantly, what happens when the storage space is full? Is there a log rotation strategy available from the GUI? Or do old...
View ArticleConfiguration with external gps
@Mariel_Tropico wrote: Hey guys Im planning to buy a 3DR Ublox gps and compass how do I configure to use both the external gps on UART port and internal gps on the navio+? my 3dr radio on USB so my...
View ArticleNavio+ or sale (two of them)
@mail.uavs wrote: I have two Navio+ boards for sale. Never installed on an aircraft. Only connected to computer via usb. I just don't have time for the project I had in mind. I also have Raspberry...
View ArticleThe Navio2 IMU's vs APM InertialSensor object
@Bsgiovanini wrote: Hi folks In ardupilot's implementation, there is a object called InetialSensor which abstracts the IMU implementation. I'm curious about how ardupilot deals with the two Navio2...
View ArticleClik here to view.
Understanding PPP results from Canadian Government
@robins wrote: I've uploaded a few .obs files to a free PPP service here in Canada. It's very automated and they email you a link to the results once processed. I've included a typical summary and...
View ArticleClarification on Navio 2 hardware setup
@Guiboy wrote: HelloIn the documentation for Navio 2 set-up, the following sentence is mentionned "only one ESC power wire (central) should be connected to Navio 2 servo rail, otherwise BECs built in...
View ArticleNavio2 setup sequence. Frustrating or what!
@Multirotorcraft wrote: Firstly can I just say that the Navio2 board is a nice clean design. But what should be a relitivly straight forward instalation and configuration is turning into just one long...
View ArticleClik here to view.
Navio+ Power Module Problem
@Hugo wrote: Hi all, I've some problem with the Power Module v1.0 from emlid. When I connect it to the power port of the Navio+, the RPi2 and Navio+ booting normaly, but when I start the ArduPlane,...
View ArticleProblems with the IMU and the examples (Navio2)
@Marti1 wrote: HiI’m new with Navio and I've just bought it for a Universityproject about the programming of an autonomous quad. But I’ve been having problems since thebeginning. Specially with the...
View ArticleWhy doesn't the Navio+ or Navio2 support Optical Flow?
@Al_B wrote: Randy's post lists the things not supported by the Navio+ and one of them is the Optical Flow (i.e. PX4FLOW).Unfortunately, he doesn't give an explanation so does anyone know why it is...
View ArticleDon't show battery data
@Dmytro wrote: I have this: BATT_AMP_OFFSET 0.000000BATT_AMP_PERVOLT 17.000000BATT_CAPACITY 4981.000000BATT_CURR_PIN 3.000000BATT_MONITOR 3.000000BATT_VOLT_MULT 12.020000BATT_VOLT_PIN 2.000000 My...
View ArticleNavio+ startup servo output
@naosedna wrote: So when starting up the Raspberry Pi with the Navio+, the pwm outputs seem to be fixed at a certain value until APM finishes starting up. On some control surfaces, this is causing...
View ArticleDVR and interface in the cloud
@confusedpenguin wrote: I'm building a 4G drone that streams all data through and online server. I've set up a host on Amazon (AWS) with a static IP and succesfully configured my Navio2 to send to the...
View ArticleError starting ArduCopter
@Multirotorcraft wrote: Unable to open /dev/spidev0.1 no such file or directory Any help would be greatly appreciated. Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Erratic motors when using RCPassThru
@prevans wrote: Hi there I've been trying to use CH8 in PassThru mode (to check out undercarriage motors). As soon as I click Write Parameters in Mission Planner after changing RC8_FUNCTION the motors...
View ArticleUpgrading from navio+ to navio2
@Nathan_Belk wrote: Can I just simply switch out the board when upgrading to the navio2? Or do I need to redo all the configurations and re-install everything? Posts: 2 Participants: 2 Read full topic
View ArticleFeature Request for REACH: add button that copies single-mode GPS coords into...
@dchang0 wrote: It would be nice to have a button that copies the GPS coordinates picked up in single-mode on the Rover pane into the base-mode on the Base pane. I suppose this would require that the...
View ArticleSPI not working with Raspberry 2, Navio2
@Omyk wrote: Dear Emlid people. I am currently working with two other people on 3 sets of raspberry pi 2 + Navio 2. We all seem to encounter the same problem with the spi interface, so our IMU's are...
View ArticleClik here to view.
Navio2 SPI not working
@MisterQ wrote: Hello, I am using Navio2 with Raspberry Pi 2 Model B and I have some issues with SPI while running the examples in C++ you are providing on your GitHub repository (the AccelGyroMag...
View Article