Choke ring antenna vs ground plane?
@myozone wrote: Has anyone tried a Choke ring antenna as apposed to a ground plane and is there any advantage ? Dave. Posts: 2 Participants: 2 Read full topic
View ArticleConsuming Trimble VRS Data w/Reach RS+
@gismapperdude wrote: Has anyone been able to do this? I am told by Trimble their VRS was created with a proprietary protocol prohibiting anything other than Trimble devices. However, I am aware of a...
View ArticleChanging Time Stamp in the Raw_Data logs
@mihaiarmandenea wrote: Hello, I’ve been using 2 Reach M+ modules to do Post Processing, and I’ve realized that all Raw Data logs have a GPST Time stamp looking like this: 2018/08/23 14:22:46.210...
View ArticleClik here to view.
Post a photo and win Reach RS+!
@dmitriy.ershov wrote: Photocontest.jpg3000x2250 1.32 MB It’s always inspiring to see how Reach helps to accomplish various tasks all over the globe! After we shipped another batch of the new Reach...
View ArticleMax acceleration?
@jcarignan wrote: From posting my files in another thread i was told my Antenna had a weak solution. I was wondering if I need to adjust my max acceleration on my rovers reach? I am using a trimble...
View ArticleHow often does Reach M+ time sync?
@troiw wrote: I have a Reach M+ GPS module that I will be using on a rover in an area where I will have little to no Internet connection. I know the M+ has to do a time sync during its start up phase....
View ArticleI2C port on Edge
@Lucas_De_Marchi wrote: Hi, Are there internal pullup registers for the external I2C on Edge? Or… is the SoC pad configured as pullup? I have a new sensor that I’m testing on ardupilot and it responds...
View ArticleClik here to view.
RTK online data processing with RPi
@Sebastian_Tilaguy_Le wrote: Hi, I’m working with a Reach RS and I want to use like an external GPS from raspberry pi without use ardupilot. The point is I need to read online, the current position of...
View ArticleEvents.Pos files - what influences them?
@jcarignan wrote: What influences the events.pos file? For some reason my event file is always only 2kb. What would be something to check to see why my events are not being logged? Posts: 4...
View ArticleReach RS+ cant´t connect to PC by USB: no COM port
@g.naveiras wrote: Hi guys My Reach RS+ unit works great as base station while it has wifi connection shared with the PC, but I wanted to check how to share the data to the PC by USB. According to...
View ArticleReach M+ Reflash, no longer connects
@timmy95 wrote: Hello there, Newbie Emlid guy here, Hopefully this is the right category. Anyways, I recently purchased a few M+ modules. when I initially tried to set up the first two with the...
View ArticleArcGIS for Collector
@Jamiercave wrote: Hi Everyone, I’m very new to Emild Reach RS + ( Only received it yesterday) Just wondering if it is possible to send the NEMA to ArcGIS Collector? will be using iPad and iPhone. or...
View ArticleWebsite query about assistance
@kevingomes wrote: Hi guys. Please can you tell me how soon will I get assistance from hp customer support ??? Please inform me if you know. Posts: 2 Participants: 2 Read full topic
View ArticleClik here to view.
IOS Device Rotation bug in Survey mode
@wizprod wrote: There seems to be a bug with the Survey mode, after the device has been rotated/oriented differently. The collect button bar never goes to the bottom again....
View ArticleHow do you correct picked up points once everything has been post processed
@millsy.g wrote: So I followed the instructions on how to post process the data, and it gets to the point where you can view everything. But now I’m not sure what I actually do to correct the points...
View ArticleRTK post processing with TBC (Trimble Geomatic Office)
@ojedajairo wrote: Hello everyone, I am familiarizing myself with the Reach RS, for which I made two static points of two hours each and an RTK file with relative coordinates, downloaded the raw files...
View ArticleNMEA resolution and autonomous vehicles RTK
@myozone wrote: I’ve been looking at autonomous vehicles tractors etc and wondered what protocol is used from an Emlid GPS to control them - I think NMEA sentences has a resolution of 0.00001 decimal...
View ArticleClik here to view.
Navio2 Yellow LED Blinking doesn't connect to both mission planner and...
@seoho0527 wrote: After, supplying power with Li-po battery. LED Sequence goes like below. 1)Green for 3 seconds. 2)LED turned off. 3)Yellow blinking 5~7times. 4)Red, Blue blinking quickly. 5)Yellow...
View ArticleUse emlid reach on TX2 but can't be detected
@jo679513 wrote: Hi, Recently I tried to use REACH RTK my laptop which is ubuntu 16.04 but it only show up in “lsusb” but not in “/dev”. Then I saw someone has the same problem, and fix it by this...
View ArticleClik here to view.
PostProcessing
@Francesco_sisani wrote: HY guys I need to post processing a static observation (5 hours) but I have the rinex of base station splitted per hour (i mean one file per each hour) so I tried to insert...
View Article
