Clik here to view.
OctaQuadX_Navio2
@mlebret wrote: Hello, Here is the state of my OctaQuadX. Navio2 with 2nd M8N GPS+Compass FoxTech Landing Gear 15x5.5 RcTimer props T-Motor 4008-18 KV380 6S-8Amp Battery Sony QX1-20mm...
View ArticleWhat mpbs does emlid reach need to operate correctly please?
@jayairuav wrote: what mpbs does emlid reach need to operate correctly please? Posts: 3 Participants: 3 Read full topic
View ArticleLooking for experienced Reach RS+ users in NorthEast USA
@Jonny5isAlive wrote: Hello- We are having some difficulty in getting good results thus far with our Reach RS+'s, and were wondering if there are any experienced users in NorthEast USA (Philadelphia...
View ArticleReported baseline distance vs. measured
@l3technologycambodia wrote: We noticed that the Baseline distance show on the Status page did not provide correct distance. It was off about 7cm from actual distance measured with tape meter....
View ArticleReach RS+ based project in Israel
@ron.ioszpe wrote: Hello everyone, We are thinking about starting a project in Israel using the reach RS+. We would like to know if there is any forum member that is already using the reach RS+ in...
View ArticleTrimble base files and how to?
@jcarignan wrote: New to all this and have been fighting with my files trying to get something processed - no luck yet! But I have my Trimble R9 Base station static data to use with my reach rover...
View ArticleGetting nav from .crx (EUREF)?
@wizprod wrote: How do I get nav out of files from here: http://www.epncb.oma.be/_networkdata/datacalendar.php?station=RANT00DEU&year=2018&month=08&rv=3&c=any ? Using the small...
View ArticleMixed vs non-mixed nav files
@wizprod wrote: Am I correct in assuming that if I use a .YYn files (from i.e. EUREF) with RTKpost only GPS will be used? Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Which end of power module should be attached to battery?
@LGenzelis wrote: Can I attach my battery to any of the two ends of the power module, and then extract power from the other one? Or is there only one allowable configuration? power_module.png891x891...
View ArticleClik here to view.
Brand New to Me
@chascoadmin wrote: I just received two Reach RS+ and just wanted to say hi. I am the VDC Manager for Chasco Constructors in Round Rock, Texas. We primarily use Topcon Hiper V’s in the field, but I am...
View ArticleFeature Request: Imperial Units
@chascoadmin wrote: United States general contractor looking for imperial units without having to transform through QGIS so that data collected can be more easily be transmitted and coordinated with...
View ArticleFeature Request: Stakeout Point File Import
@chascoadmin wrote: I would like to create and market a system for using the Reach RS+ for simple layout functionality in the construction environment. It would greatly affect our organization if I...
View ArticleClik here to view.
Possible bug - sat loss in raw when changing RTK settings
@wizprod wrote: Hi, I am seeing a wierd issue running 2.14 on RS+. If I change things like SNR mask or Elevation mask, I get a dropout of satellites, only recoverable by shutdown and then restart...
View ArticleUsed satellites count in RTKPost pos solution very low
@wizprod wrote: Hi, Whenever I postprocess 2 datasets (rover+base) from the Reach RS+ will all systems (except beidu) enabled, I always end up with 5-10 satellites used, when I inspect the .pos file....
View ArticleReach M+ S2
@amy.tran wrote: Before creating a new thread please refer to Quickstart guides for Reach and Reach RS. In case you are creating a thread about an issue it is necessary to provide following...
View ArticleFeature Request: Web Map Background
@Brent_W wrote: Hey moderators, I thought we had a thread for feature requests. Kindly move this if it’s in the wrong place, please. There has been some discussion, not a lot, but it keeps coming up...
View ArticleNAVIO2 and RONIN MX
@christomaniatis wrote: Hello everyone, I’m new in the forum and I would like to know if anyone has ever used the NAVIO2 and the RONIN MX for a project? Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Reach RS and Reach M+ connections
@canhbui wrote: Hi all, I am planning to use Reach UAV mapping kit for more accuracy. Firstly, I connect to Reach Rs, and set up like image below. Screenshot_20180817-165843.jpg1080x1920 188 KB After...
View ArticleProblem: Reach M+ won't power up correctly when connected to Pixhawk 2.1?
@carbon.extreme wrote: Hi All! i’ve just entered into Emlid products. I plan to integrate them into my UAVs powered by Pixhawk 2.1 + Here GPS. I’ve loaded Arducopter 3.5.7 onto it and configured as...
View ArticleDJI M210 RTK using M+ (Rover) and RS+ (Base)?
@shepardb wrote: Most of the information I’ve found pertains to the Phantom 4 and PPK, or were several years old. If this has been covered, please let me know where my search terms failed. Can I use a...
View Article