RF data link settings
@mirkoloizzo wrote: Hi everyone, just few words to introduce my topic. I build up an rtk GPS system by myself based on UBLOX M8T chip. The system is working so good with rtklib library, I get a stable...
View ArticleWhat am I overlooking?
@mapguy wrote: I’m not sure what I’m overlooking but I’m not able to connect to local cors network corrections. I use a Trimble R2 with the network service account without any problems connecting. I’m...
View ArticleLocal grid system
@Cressy wrote: Hi can any one tell me if I can setup the reach in a local grid system Posts: 2 Participants: 2 Read full topic
View ArticleEdge Connection Problem - Edge not detected
@cipolato wrote: Hello Everyone, I am Marco from Italy. I acquired a Emlid Edge to stream video from my FDR AX 53 to long distances. Unfortunately, even if i followed the manual step by step i...
View ArticleWhere to buy?
@danieljohnbarnett wrote: Hi I would like to buy Reach RS and M but I can’t seem to find anyone that sells it in stock. We would like to start using it fairly quicky. I see there is a new models...
View ArticleStop-and-go survey – are we there yet?
@fgnievinski wrote: Greetings. The release notes for ReachView v2.11.0 mention the following new feature: Surveying: point collection start and end times are saved into the project I’m interested in...
View ArticleHow to do post-processing
@Mario_Lemus wrote: Hello everyone. I want to learn how to perform post-processing with RTKLIB. In most of the times I do not get a fixed solution with emlid reach rs, so I consider it important to...
View ArticleBad mavros/local_position/pose and mavros/imu/data
@rcommissaris11 wrote: Hello Now I want to use /mavros/local_position/pose. But even if I walk a straight line of 100 meters, my pose wanders around the 0 position. The gps is relatively accurate, so...
View ArticleReach rover with 4G LTE. is it possible?
@sygong wrote: Before creating a new thread please refer to Quickstart guides for Reach and Reach RS. In case you are creating a thread about an issue please specify the appropriate sub-category...
View ArticleReach rover + 4G/LTE. is it possible?
@sygong wrote: Dear Reach users: I have found the accuracy of Reach RS base improved dramatically (from meters to centimeters) when connected to e-GNSS network in my country. I am thinking if I could...
View ArticleClik here to view.
ESC calibration problem, unable to calibrate due to set param error
@tompree wrote: Hello, I’m coming close to flying my first drone (arduplane) and I’ve seem to have got stuck at the last hurdle. gps, radios, accel all calibrated, all servos working the way they...
View ArticleFeature request | add auto wifi shutdown
@tobias-dahms wrote: Hi, please consider to an an option to disable all wireless networks if no connection is active for more than e.g. 30 seconds. I think that would be a nice option for the safe use...
View ArticleConverting wgs84
@jmcarthur wrote: Converting reach lat. long and h which I believe are in WGS84. So many different ones. I am working in Canada and it seems we use NAD83(CSRS) which I can convert to ITRF2008 which...
View ArticleClik here to view.
Reach RTK for precision landing problems
@glebovmaksim wrote: Hi all! We are trying to use Reach in UAV for precision landing and loiter. Our setup: Navio2 with 4g modem. Reach RTK module connected to Navio USB port. We configure...
View ArticleKnown position of base
@danieljohnbarnett wrote: I am new to all this and trying to understand it all and had a couple questions. We are going to do some drone 3d mapping and will be placing some GCPs. From my understanding...
View ArticleDouble time stamps
@tobias-dahms wrote: aI try to get time stamps from a Canon S100 with CHDK, KAP script and a photo resistor. It works, but there are always 2 instead of one time stamps created, always some 1/10 of a...
View ArticleRTK stuck in Boot loop
@nga31 wrote: Need Urgent fix! I have been using the RTK for about a week now and It was going fine. Today I added a new wifi network and was following a tutorial about setting up a rover. I changed...
View ArticleProcessing Float Points for Accurate XYZ
@flyinmada wrote: Hey all, We just started using two Emlid Reach RS as Base and Rover. We forgot to change setting to “FIX” and recorded all GCPs as “FLOAT.” I tried using the post processing in the...
View ArticleRTK position inconsistency
@aespinalp wrote: Hello, i am a land surveyor and have access to a paid network of reference stations emiting corrections in RTCM3 via Ntrip, and also own geodetic grade GNSS recievers. Today i was...
View ArticleClik here to view.
Large floating errors on a benign Reach stationary file
@Isaac wrote: Hi All, I have been post-processing some Emlid Reach 24 hour stationary files collected at 1Hz, after trying a few different processing parameters I ended up with a few files with large...
View Article