Using crx/17d/rnx files (Germany/Austria)
@tobi_kellner wrote: Hi everyone, playing with my new Reach kit, I am starting to play with Post-processing using rtklib. I found this station, 23 km away near Salzburg in Austria (I live just across...
View ArticleRtk setting elevation mask angle
@giulio wrote: maybe it’s a small bug. when i select the value with drag the mouse, next I can not fix the value because the cursor remains attached to the mouse. with the other settings ( SNR mask,...
View ArticleExternal HMC5893 Compass and Bad Compass Health
@flyingw wrote: I’m using the Navio2 version from sometime around May 2017, ArduPlane 3.7.1 and an HMC5893 compass installed externally. I have the compass configured as Compass #3 and as the primary....
View ArticleWms
@giulio wrote: it would be useful to have the possibility to visualize one’s own cartographic base trought a wms connection. giulio Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Merry Christmas and a Happy 2018
@dmitriyershov wrote: Originally published at: https://emlid.com/merry-christmas-happy-2018/ We’d like to wish Happy Holidays and say thank you to all our users for helping make 2017 another...
View ArticleClik here to view.
Autonomous quad build questions
@shamdasani wrote: Hello all, I’m creating an autonomous quad capable of lifting a 1kg payload, image/facial recognition, and (basic) obstacle avoidance. I just had a couple questions. 1.) I’m using...
View ArticleWhat is the difference between the Stretch and Jessie Images?
@flyingw wrote: Hello Emlid, (1) As a Navio2 and ArduPilot user, why would I choose either the Stretch or Jessie image? Is there and advantages to either with regards to Navio2? (2) If I am running a...
View ArticleCompletely disable automatic updates?
@Rick_Armstrong wrote: Hello, Is it possible to disable the “auto-update over wifi” thing? We’re using the Reach installed inside a robot, with no Wifi access. The Reach has me stuck at “Please...
View ArticleIntermittent logging
@darrel.maddy wrote: I have just upgraded my two reach to ver 2.10. I am trying to do a simple ppk solution but on my first attempt the base failed to save the log (despite initially showing as...
View ArticleExtracting "average" coordinate for part of log
@tobi_kellner wrote: Hi, if I have a log file of a walk where I left the Reach in different locations for a few minutes each. Now I would like to get the coordinates for these locations. I know I can...
View ArticleUpgrade to ArduPlane 3.8.3
@flyingw wrote: Dear Emlid, I wish you all a happy and healthy new year. I understand that the latest Stretch version of the Navio2 release comes with Arduplane 3.8.1. I want to upgrade it to 3.8.3....
View ArticleEmlid tool doesn't have all frame options
@pmk12 wrote: I just installed the newest raspbian and I go into the emlid tool to select the type of vehicle, version, frame type, etc… The Copter selection only has arducopter and arducopter-heli as...
View ArticleNAVIO2 Power Connector
@nsteiner wrote: Hello, The POWER connector socket ripped from my Navio2 board during a rebuild. I couldn’t quite get it soldered back in place and now some of the pads are ripped from the PCB. Is...
View ArticleROS NAVIO and Reach
@tobe wrote: Hi, I have been scouring the forum looking for an answer to solve our current issue. We have a 2 x Reach, Navio2 and MAVROS(Basestation Computer) setup. We are looking to pass corrections...
View ArticleReach RS not connecting to Internet via WiFi to Update
@bcarter wrote: All, I last used my Reach RS in August. I am now trying to update Reachview (I’m currently on v2.5.3-r0), but I cannot get it to connect to the WiFi. Here’s what I have done. I...
View ArticlePower module power cable
@CaptCrash wrote: The multi wire power connector/battery status cable that goes from the power module to the Rpi broke, is there another way to get another cable without buying the whole $16 module...
View ArticleReach SSH: "Write failed: Broken pipe"
@Rick_Armstrong wrote: We have a number of Reach GPS modules installed into mobile robots. These modules do not have wifi access to the Internet, since they’re stuffed into metal boxes (the chassis of...
View ArticleClik here to view.
Reach rover via BT to android running Lefebure NTRIP Client
@jp1 wrote: Hi Has anyone setup a reach board to bluetooth GPS data to android device running Lefebure NTRIP Client (I have a subscription to a correction service) in order to get a RTK position on...
View ArticleAndroid Mock location
@jp1 wrote: Hi Can reach App do mock location for other android apps running on same device, as the liebrefure NTRIP caster could? Cheers JP Posts: 1 Participants: 1 Read full topic
View ArticleReachView update from V2.1.3-r0 to 2.10.0-r0 failed
@chell wrote: Hi, I updated my 2 reach firmware from V0.4.7 to V0.4.9 and then to V2.1. After this I started an update of ReachView to V2.10 but with no luck. The update process hangs every time at...
View Article
