SBAS (EGNOS) ever used when no other correction source is available?
@Isaac wrote: Hi Emlid, From observing ReachView GUI I would say that EGNOS (SBAS) is never used when no other source of corrections is available, am I correct or I’m misjudging the GUI? PS: I’m using...
View ArticleLong Range Telemetry system for use in Europe
@gcosta wrote: I’m trying to build an UAV for operation at sea, and with a max range of 200km. Is there any telemetry system that i can use for these conditions? It is supposed to “land” at the sea...
View ArticleAccuracy of Single Reach RS?
@jazee wrote: This may be kind of a dumb question (I’m a newbie) but what is the approximate horizontal and vertical accuracy of a Reach RS * on average * without performing PPK? For sake of...
View ArticleVery long static RINEX v.2.11 from ReachView 2.9.3 does not process well
@Isaac wrote: Hi Emlid, Please see the following RINEX file created by ReachView 2.9.3: https://drive.google.com/file/d/1BJjEAC43HVCG8Ah2Y6towpmVNm9a84Ee/view?usp=sharing For some reason after fixing...
View ArticleIs the SNR mask in "RTK settings" menu being ignored?
@Isaac wrote: Hi Emlid, May it be that the SNR mask dB/Hz defined in RTK settings menu is currently being ignored? (see screenshot) Capture.PNG1196x766 43.5 KB I have setup a 30 dB/Hz mask and I can...
View ArticleUnable to connect or flash EMLID Reach
@jp1 wrote: Hi When I boot EMLID Reach board I get an endless flashing yellow LED. Have made sure clear sky. No hosted network and unable to connect to another. Tried re-flasing in Edison Board Config...
View ArticleIssue: Reach RTK Module is showing Red Light
@Himanshu wrote: Hi, My Reach RTK Module is showing solid red light(Internal App Error). Please help me to Fix Above issue. Is their any way to reset it. I was trying to update it. Posts: 1...
View ArticlePython code example to play audio from RPI when armed ord disarmed drone
@Ainars_Locs wrote: Hi i not programmer can somebody help to get some code example to get audio out from RPI when armed or disarmed status changes and vhen GPS are fixed ? Posts: 1 Participants: 1...
View ArticleTelemetry SIK radio
@danper wrote: See attached picture for system info. arducopter.png815x621 14.2 KB Just bought a SIK radio and trying to connect it. Problem is that i “lose” GPS when i connect SIK radios to my navio2...
View ArticleReach - Disable WiFi Access Point
@campbellsinclair wrote: It appears that the WiFi Access Point starts approximately 30 seconds after boot on Reach Image v2.9.0 (and possibly other versions). How do I disable this? I want the system...
View ArticleNavio 2 + DroneKit
@illu92 wrote: Hi! I am trying to make work dronekit with navio 2. I was trying to make work the examples that are in the web with navio. They seem to work fine but only when i connect the raspberry...
View ArticleHow to connect to Android Phone and Share Internet to Reach RS? HELP!
@lado.kabal wrote: Hello! I have received my new Reach RS today! Updated to latest version. Now I want to go to the field to test it, but dont know how to connect to my Mobile Phone (Android) and...
View ArticleReachView v2.10.0 - Dev updates
@efedorov wrote: Hello everyone, It’s been some time since our last update, so today we have two new releases. They are slightly different in both features and their purpose. Starting today, we are...
View ArticleAntenna Upgrade Options
@garner5 wrote: Hi, I am operating the Reach modules in base/rover mode for land surveying. I was wondering if there was any antenna upgrades that work better than the antennas that came in the Reach...
View ArticleReach RS to Reach
@DaneGer21 wrote: Im looking to upgrade my base Reach module to a Reach RS. How can I get my rover(not RS) to communicate with the Reach RS? Currently my two modules(base/rover) communicate via 3dr...
View ArticleNeed help Post-processing configuration for BASE and ROVER
@Pat_Savard1 wrote: Hello users, as we never get our EMLID REACH RS to work properly in RTK, I would like to use PPK as this still the lase option to save it from being a paper press! AR Ratio...
View ArticleHow to ssh into reach via USB
@bakalolo wrote: I would like to ssh into the reach emlid rtk gps from my computer via a USB connection. The reason I want to do this is to download the log files. Has anyone done this before? I am...
View ArticleCalling fellow Land Surveyors
@Tornado wrote: Hello fellow Land Surveyors, I have read posts from several enthusiastic, successful (or partially successful) users and posts from several dissatisfied Reach/RS users. So I’m trying...
View ArticleGPGGA format?
@Simon_Allen wrote: At the end of this post is a definition of the NMEA $GPGGA string. My question is : What does emlid put in field 13? It does not appear to be age of differential. as it has both...
View ArticleFailed to update to 2.10.0
@dpitman wrote: I went to update my 2 Reach modules to 2.10.0 First one went fine, second one I have a hiccup I need help with. Steps taken. Power reach module indoors near wifi router. It connects to...
View Article