Any ideas of choosing Navio2 or Pixhawk
@Beytullah_Durasi wrote: Hi All! I am thinking about differences between navio and pixhawk controllers. There is no comparison on internet or I couldn’t find it I think. Can Anyone tell me What is the...
View ArticleClik here to view.
Navio2 GPS inject - rover still jumps around on the map
@antonvh wrote: It is necessary to provide following information to get help: 1) Firmware image and ReachView version.2.5.2-r0 2) Detailed problem description. How is expected behavior differ from the...
View ArticleOpen project doesn't work and export spins
@finantj wrote: I tried a test survey today for the first time. Two ReachRTK connected via 3DR radios...all seemed to check out. However, I am now unable to open the project. Open Project does not...
View ArticleNavio2 with Reach as second GPS
@mwfoshee wrote: Not sure what "Image" you are reffering to ArduPilot was just installed, so the newest. Navio2, Raspberry Pi3, Reach and Mission Planner I simply want to use my reach unit in RTK fix...
View ArticleClik here to view.
Question about EKF Compass Variation Alarm
@flyingw wrote: Just completed a successful short automated mission and the UAV came home safely. At each juncture in the mission when the UAV turns toward the next waypoint, the EKF indicator turns...
View ArticleBase Corrections not coming through (via 3DR link)
@nijoe wrote: It is necessary to provide following information to get help: 1) Firmware image and ReachView version.2) Detailed problem description. How is expected behavior differ from the observed...
View ArticleClik here to view.
RTK event post-process problem
@natapatnatapat wrote: Hi guys, I was testing with uav mapping by using Reach RTK and Reach RS. Reach RS inject coordinate to UAV by mission planner and sent to UAV with ReachRTK. Everything seem to...
View ArticleStuck in time sync
@klemen_fgg wrote: My reach module is, according to docs, in time sync mode (green and magenta blinking). It doesn't help if I start it in known WiFi area (connected to such just minutes before the...
View ArticleA question about communication via hotspot
@yosons wrote: Hi everybody: This is an interesting attempt.Can i connect one Reach module to a hotspot created by another Reach module?So i will choose one of them as Base,another as Rover,and the...
View ArticleClik here to view.
PPP kinematic without base station
@FisherLong wrote: Is the anyone process the data without a base station ,just use the precise files. Here is my settings. I got the precise files from the nasa.gov for my rover uav. 5.jpg562x609 48.5...
View ArticleNew Build Question - Raspberry Pi3 + Navio2
@jesse wrote: I'm hoping this is the right area to ask this question, if not feel free to move it. I'm looking at building my first drone and need some suggestions on what parts to buy. I would like...
View ArticleRaspivid not starting in Systemd
@Barry_Bolton wrote: Hello everyone. I am trying to get raspivid to start in systemd and created the following service file sudo nano /lib/systemd/system/fpv.service I placed the following in the unit...
View ArticleWhat's needed to make Reach RS fully functional?
@datafromdrones wrote: It is necessary to provide following information to get help: Firmware image and ReachView version. Detailed problem description. How does observed behavior differ from the...
View ArticleProblem to get fix status with Reach
@Johannes_JM wrote: Hello everybody, i have two reach modules to perform RTK GNSS. They are interconnected with a 3DR radio set. I’ve installed the latest software 2.7.3. Everything works quite nice....
View ArticleClik here to view.
The RTK boat project
@TB_RTK wrote: I have been working on a project lately. To implement ReachRS to exisiting navigation system onboard. My boat is configurated with: Simrad GO9 XSE Simrad 3G radar Simrad NMEA2000...
View ArticleWeird differences in serial & NTRIP rover inputs
@dkoffler wrote: I have setup 2 Emlid Reaches for RTK (one base one rover). I’m seeing some unexpected differences when connecting to NTRIP casting server. Scenario 1: Connect to caster using the...
View ArticleEasy way to add AP and setup wireless
@Barry_Bolton wrote: Hello everyone. I discovered this very helpful video to add a menu item to raspi-config to either add a Wireless AP to your PI as well as adding a WIFI network to your pi. And you...
View ArticleQ=1 if RINEX Header and Q=0 with known base coordinates
@Vusal wrote: I got Q=1 if I use RINEX Header option in the Position tab and Q=0 when I enter exact coordinates. I used Leica GPS1200 L1/2 receivers in static mode to obtain high accuracy benchmark...
View ArticleReach stops logging/wifi after some time
@rafael.lehmkuhl wrote: Hi, I have two Reach units, one mounted on an UAV and another on a base station. The one on the UAV is connected through a Pixhawk2 (Serial port), and the one on the base...
View ArticleHow to read the state RC out?
@GSilva wrote: Hello everyone, I recently have a Sony QX1 camera that I will use to take photos from ‘Mission planner or QGround control’. This camera generates a Wi-Fi network to connect the...
View Article
