Minimum hardware requirement to get started
@andye wrote: Hi folks,First post.I want to integrate Reach as a serial NMEA RTK corrected position source for a Raspberry Pi data logging application. What hardware do I need to purchase to do the...
View ArticleReach and RFD868x
@simon.cool wrote: Hello, Has anyone used RFD868x modules for correction signals with reach? I have found posts on RFD868+ but not on these ones. Thanks! Posts: 1 Participants: 1 Read full topic
View ArticleBluetooth pairing not working with Lenovo tablet
@baza wrote: I am having issues with Bluetooth using my lenovo yoga tablet running android 6.0.1 and since recently installing the new 2.7.7 update for reachview. before the update the tablet could...
View ArticleHow to ensure accuracy of RTK system?
@raul.alonso wrote: Hello everyone, For professional work I have to ensure the accuracy of the RTK system. In the new version of ReachView, I see different values below the values of latitude,...
View ArticleRTK Reach System - broadcasting the corrected position from the rover
@nijoe wrote: I am considering using a pair of Reach systems as the basis for an RTK system to monitor the position of an unmanned survey vessel. The base and rover would communicate via radio modem....
View ArticleClik here to view.
Reach RS global deliveries launched! Introducing new distributors
@ivereninov wrote: Originally published at: https://emlid.com/reach-rs-global-deliveries-launched-introducing-new-distributors/ Last week we've shipped the first batch of our field-ready RTK GNSS...
View ArticleIs Beta v4 image compatiable with rangerfounder teraranger one?
@zhanghaijason wrote: Hello, I want to use the teraranger one with navio2. But when I connect it with Pi or Navio2, rasapberry Pi can detect its default address 0x30. But the reading is wrong. The...
View ArticleEpoch recording frequency for Reach
@Steve_McMurray wrote: Hi I was wondering what the fastest epoch recording frequency for the Reach is when used on a UAV recording for PPK ? We will be using a Topcon GR3 for a base and set the epoch...
View ArticleClik here to view.
Reach Rover's data sending Garbled characters
@Alok_P wrote: Hi I am getting the base corrections to Rover and I am checking Rover status through USB-Serial using FTDI device. Every time its sending garbled characters as shown in the figure. How...
View ArticleReach + Pixhawk + S110
@lefty wrote: Hi, I have been reading several topics related to using either a Sony A6000, or QX-1 in order to obtain topography maps that have accuracy of +/- 5cm with minimal ground control points....
View ArticleReach board won't connect to wifi networks after reflashing to v2.3
@Eric_Guerrero wrote: Hello everyone, I'm having serious problems trying to connect my reach board to a wifi router after reflashing to version v2.3. The board creates a hotspot, I connect to that...
View ArticlePassthrough FrSky telemetry not working on RP3/Navio2
@jetpathar wrote: Hello, I'm using successfully the native passthrough FrSky telemetry on Pixhawk, Pixhack and PixRacer with myTaranis X9E and the great C&T (Craft and Theory) FlightDeck script...
View ArticleWi-fi radius
@kepetinek wrote: Hi, I would like to use my Reach kit in drone, but the radius of the wi-fi hotspot is about 150m. How can I reach the 10 km radius connection between the base and the rover? Thank...
View ArticleLLH time format
@Tuckles wrote: Hello, My LLH solution file outputs:% GPST latitude(deg) longitude(deg) height(m) Q ns ...1943 69198 44.686910659 -76.084640552 119.5456 2 7 ...1943 69198 44.686910815 -76.084640585...
View ArticleClik here to view.
Reach Fix non-technical report
@Brent_W wrote: Earlier there was a lot of discussion about problematic fixes with Reach. I thought I'd contribute with a non-technical report in the form of pictures where I was able to get strong...
View ArticleClik here to view.
White Sands Rover Sniffer Project (WSTF Sniffer)
@rusty74 wrote: roverClip.jpg928x433 87 KB Hi all! I am a senior undergrad in EE at NMSU. We are working on an ongoing project for white sands jet propulsion office that utilizes reach, and a small...
View ArticleHow To Take Full Advantage Of Reach+Edison
@rusty74 wrote: I'm running the current reach rtk image and current reach view app. I am trying to integrate the reach into an arduino rover setup in order to get the rover to navigate to each...
View ArticleNavio2 settings file
@ijustwant wrote: HiBeen searching but cannot find any info regarding APM settings storage in Navio2. Today I experienced that all PID setting are lost and set to default settings. Every other setting...
View ArticlePPK with cors
@dicky wrote: I'm trying Post processing with cors. No result. When I try check the sat vis, the results is no obs data. How to use rinex from CORS for PPK? @igorvereninov @TB_RTK @efedorov Thank you...
View ArticleClik here to view.
Reach RS - No Fixed Solution, Strange Float Solution
@gsjlogie wrote: Hello, I recently received two Reach RS units, and have been testing them out. I have found it impossible to get a fixed solution in RTK mode, only float. Furthermore, the float...
View Article
