Problem about TCP connection within Wifi by using RTKNAVI and STRSVR
@thuyan.nt wrote: Hi all, Now I have 2 ublox EVK-6T, I use one of them to be as my rover, and another one to be as my own base station. I used RTKNAVI for my rover and used STRSVR for my own base...
View ArticleSoftOSD - A software HUD for NAVIO+
@Thanatos wrote: This is the Project Page of SoftOSD the software HUD of NAVIO+. In this project topic you will read about the releases of SoftOSD along with all the project news and upcoming...
View ArticleNeed help getting ntrip corrections
@rep wrote: Hi, I'm new here from Spain.I 've received one Reach module last week. I've started to config my module, but I'm having some problems. About wifi configuration ok...It's easy (more or...
View ArticleCompass issue
@victor.martin wrote: Hello, I have made a drone with raspberry PI B + and navio+ whom I've configured with mission planner following the guidance...
View ArticleInternet connection through Wifi possible
@ptitviet wrote: Hi, I wondered if it was possible for the Reach to get Internet access (and NTRIP broadcasting or receiving) through the smartphone used for getting access to Reachapp? In other words...
View ArticleReach height value seems incorrect
@dmiles264 wrote: I just got my reach modules up and running and have both modules out on the patio about 5 feet apart. The rover is in float mode and bounces back to fixed mode several times a...
View ArticleCustom Web Page for ReachView
@dmiles264 wrote: Is it possible to create a custom web page for ReachView? Can you give me an information on how to do this?Thanks... Posts: 1 Participants: 1 Read full topic
View ArticleLog mapping
@yujiro wrote: Hello, I want to map location data of Reach log file on google map. first, I downloaded the log file from Reach (rover). so, someone know how to convert the log file to lat/lng...
View ArticleAP_HAL RCInput @ NAVIO does not work
@itochev wrote: Hello all, the example in the AP_HAL/RCInput does not work on NAVIO board (with RPI2), but the example in the RC_Channel works fine. Also the RCOutput works fine. Any suggestions what...
View ArticleClik here to view.
Setting up Wi-FI "Sorry, we were not able to reach your device"
@checco68 wrote: HyI received my unit but I'm not able to create the wifi hotspot I tried to reflash with laptop (windows) BUT again I'm not able to find the ip addrees wifi.jpg1366x768 170 KB Posts:...
View ArticleClik here to view.
Introducing Navio2
@ivereninov wrote: Originally published at: http://www.emlid.com/introducing-navio2/ Hello friends, We are happy to announce Navio2 - the new version of Navio autopilot. We have listened closely to...
View ArticleChanging telemetry baud rate?
@Walter_King wrote: Hi all, In the Navio+ docs, I read this. "When using UART for telemetry please note that default baud rates are: 115200 for primary (-A) 57600 for secondary (-C) 3DR Radios are...
View ArticleReach Rtk using Trimble Zephyr 2 Antenna
@FrankK wrote: Hi, I am interested in Reach Rtk and would like to know if it is possible to get precise positions with Reach Rtk using Trimble Zephyr 2 Antenna on a pole? If other antennas can be used...
View ArticleCan't connect the ReachViewApp
@Teduav wrote: Hello I can't connect my Reach's App.The LED state is white,bule,bule,red. I have check the IP,it remind me the Reach's IP is 192.168.1.122. But when I tab this IP in the browser I...
View ArticleClik here to view.
PPM Decoder not Working
@Sathish_Kumar wrote: Just now I Got my Replacement Because of MPU problem. Thanks for the replacement. Please help me solve this problem @ivereninov All the programs and examples are working fine and...
View ArticleNMEA format solution on Serial Stream to ttyMFD2
@mman wrote: Hi Guys, Managed to get the reach RTK base and rover connected and operable as per the Quickstart guide. Fix took 5 min or so. Nice. I have now set the rover solution output path to...
View ArticleClik here to view.
Drone motor and esc setup to navio+
@johnpierrecena wrote: Hi guys,This is my first build so I'm having a hard time figuring things out. Im building an octocopter and found this motor setup at Arducopter docs. So the numbering in the...
View ArticleNAVIO2 for Autonomous Boat
@nbr wrote: Hi All, Had a read of the forums and it seems most people are using their Navio for air based projects. I am looking to purchase this device for use in a long range autonomous boat. To get...
View ArticleReach RTK radio options
@AJB wrote: Hi,What RTK radio link options are out there? I want to go 2 - 4 km and prefer the 450 -470 MHz band. I would also consider 900 MHz.Thanks,Andrew Posts: 2 Participants: 2 Read full topic
View ArticleRaspberry Pi prog flash size?
@lockheedtristar wrote: After this topic (http://diydrones.com/forum/topics/pixhawk-1mb-flash-limit) i am def going to go with a NAVIO2 solution for the future. Can someone explain what is the...
View Article