Clik here to view.
Can't connect to Reachview
@erin wrote: LED is flashing in the sequence of , able to detect reach IP on Fing IMG_7679.PNG1242x2208 174 KB but cannot connect to reachview on browser, tried on both windows desktop google chrome...
View ArticleClik here to view.
My new heavy lift copter
@larkinja wrote: Hi Guys! It's been awhile since I have been on here. I wanted to share a new build I am working on. I originally built a 650 size quad with the Navio2 and had great results....
View ArticleRTK Kit - is this enough to send and receive signal? Would it work sending...
@candersen10 wrote: Hello, I am seeking to set up a base station, and to send an RTK position to a rover. I would like to mount the RTK base station on a barn, and to send a signal in a 10KM radius....
View ArticleNavio 2 unstable flight (going left and right)
@Vava wrote: Hello! My problem is that during the flight my X-type copter (DJI Flame Wheel F450) is unstable in the roll axis. First it goes right, then it might stay level for a while, then it goes...
View ArticleClik here to view.
Error Injecting RTK
@Matthew_Cunningham wrote: We are in the final stages of getting a quadplane up and running! Build is complete now just adding in the finishing touches, the main one being RTK GPS injection. We had...
View ArticleUnable to build from source code due to task in 'mavlink' failed
@baikeshen wrote: Hello, I am using RP3+NAVIO2 with Emild Rasbian 20170118 image (the latest) and trying to build from source code on my RP3. My building steps are as follows: 1) Download the APM code...
View ArticleClik here to view.
Cant input NetworkName and pwd while using Reach
@zhangkaibest wrote: image.jpg967x356 151 KB as you can see in the pic above, i can t input NetworkName and pwd while configuring no matter base or rover . any suggestions ?? i tried to do it in my...
View ArticleGPS: undefined
@simon.cool wrote: Hi, I have just tested my Reach system according to the quickstart docs in the open field, I have 5 satelites with SNR levels above 50, however the system won't fix, it's status is...
View ArticleTripod, tribrach, and monopod recommendations
@weddy wrote: We're ecologists playing surveyors as part of a new project. We have 2 Reach RS's ordered - and excited for their arrival. We wanted to hit the ground running, and get some the necessary...
View ArticleSTUCK! New install pwm problem duty_cycle: No such file or Directory
@DBPr wrote: I see this issue as solved, but I am getting the error root@DBNavio2:~# sudo ArduCopter-quad -A udp:192.168.1.12:14550Raspberry Pi 2/3 with BCM2709!LinuxPWM_Sysfs:Unable to open file...
View ArticlePossible change needed in Docs for making from source
@DBPr wrote: While making arducopter from sources using the Emlid instructions here , there is a step instructing that after waf configuring, run `waf --targets bin/arducopter-quad` this results in...
View Article[Urgent] Help with setting up an ad hoc connection!
@curtzerr26 wrote: Hello! I'm in a group project and we've been using an RPi 3 for a while. We've been communicating with it using an ad hoc connection which has been working very smoothly with no...
View ArticleClarification - post processing (no live link)
@tdyne wrote: Hi, I have one rover and one base. I am planning to do a measurement that do not need any live correction.I am only interested in the relative movement of the rover compared to the base...
View ArticleClik here to view.
Reach RS for timelapse photography - Possible?
@Munch wrote: First of all I am completely new to this. I am just a photographer with great ideas. I have a question concerning the Reach RS and it's possibilities: I would like to take time lapse...
View ArticleClik here to view.
Position corrections not received by pixhawk
@Landscan wrote: I'm on a significant learning curve and have been struggling with the Emlid Reach and Pixhawk integration. I've managed to get the Base and Rover to communicate over wifi with...
View ArticleClik here to view.
Reach Integration with Navio2 over 4G
@larkinja wrote: Hi Guys! I am working on this project: community.emlid.com My new heavy lift copter Hi Guys! It's been awhile since I have been on here. I wanted to share a new build I am working on....
View ArticleGPS Position Runaway
@Strambauer wrote: Hello together, in the last days i did some testing with my Reach Units. After some time with quite good results the position began to runaway. With runaway i mean the stabel...
View ArticleClik here to view.
Need some help figuring this out :)
@Chrabban wrote: Hello, i am new here and have just found out about the Reach/Reach RS, i want to be able to do high accuracy mapping/topography or as high accuracy that i can, without having to spend...
View ArticleCalibration Setup
@candersen10 wrote: I'm planning to purchase this kit (http://www.robotshop.com/en/reach-rtk-kit-multi-gnss-accurate-positioning-system.html), adn to integrate it in an outdoor rover/base station...
View ArticleReach RS (and Reach) Connection With Non-Android Devices?
@achiii wrote: I am very excited about receiving the RS units when they start shipping. I have been using a pair of reach units up to now and am excited about the additional functionality of having...
View Article
