@Gord_Stephenson wrote:
I was trying to update a reach RS from ReachView 2.0 to the current ReachView 2.5 and during the update process the internet feed was interrupted. Not when I boot the Reach RS, I get 3 solid LEDs ( Orange, Blue, Green). The RS is not connecting to the network anymore and is not creating it's own hotspot. I've tried a hard reboot with the result still being 3 solid LEDs and no network. This to me indicated the need to reflash, with the goal being to load ReachImage 2.3.
However I can't get the Reach RS to register with the Edison flashing tool, ie it says there is no edison device connected and times out. I've installed the drivers multiple times. I've tried to flash on 2 separate windows machines with the same result. I tried the command line flashing but get stuck at needing the xfstk tool - which I understand needs a linux.
Any thoughts or insight into this issue?
Posts: 1
Participants: 1